Abstract:In this study, the low-cost production of Cu-Al-Mn-Fe shape memory alloy single crystals exceeding 46 mm by abnormal grain growth was realized only through annealing their cast alloys. The results show that the misorientation formed during annealing may be responsible for such abnormal grain growth process. It was confirmed that this misorientation resulted from the dissolution of bcc beta(FeAl) nanoparticles during heat treatment at a sufficiently temperature of approximately 1173 K. The rate of migration of the abnormal grain boundary was experimentally measured to be approximately 9.3 x 10(-5) m S-1 within 2 min of the commencement of abnormal grain growth. Additionally, the range of composition of the alloys that can lead to abnormal grain growth was determined. When the Cu-13.0Al-6.5Mn-3.2Fe single crystal close to the [100] direction was deformed to a prestrain of 12%, full shape recovery happened without any residual strain. At that time, the superelastic strain was approximately 9%. Such a superelastic characteristic remained nearly constant over 50 cycles, showing excellent fatigue resistance. The superelastic properties of the present Cu-13.0Al-6.5Mn-3.2Fe single crystal are compared to those of commercial Ni-Ti-based shape memory alloys. Therefore, it can be considered as a new kind of superelastic material having practical applications. The obtained results should be of great significance in the development of Cu-based shape memory alloys. Furthermore, it is expected that a similar microstructure can be designed for the production of more metallic single crystals.

Excellent superelasticity and fatigue resistance of Cu-Al-Mn-W shape memory single crystal obtained only through annealing polycrystalline cast alloy

Excellent Superelasticity of Cu-Al-Mn-Cr Shape Memory Single Crystal Obtained Only Through Annealing Cast Polycrystalline Alloy

Low-cost Cu-based Shape Memory Single Crystals Obtained by Abnormal Grain Growth Showing Excellent Superelasticity

Excellent Shape Recovery Characteristics of Cu-Al-Mn-Fe Shape Memory Single Crystal

A Novel Ni-alloyed Cu-Al-Ga-Fe Shape Memory Alloy with Excellent Shape Recovery Performance

Role of (FeAl) nanoparticles in abnormal grain growth in the annealing of cast Cu-Al-Mn-Fe shape memory alloys

Development of Cu-Mn-Ga-based Ferromagnetic Shape Memory Single Crystals

Abnormal Grain Growth in Annealing Cast Cu–Al–Mn–V Alloys and Their Superelasticity

Microstructure characterization, stress–strain behavior, superelasticity and shape memory effect of Cu–Al–Mn–Cr shape memory alloys

Microstructure, Martensitic Transformation and Excellent Shape Memory Effect of Ga-alloyed Cu–Al–Mn–Fe Shape-Memory Single Crystal

Superelasticity of Different-Orientated Cu–Al–Ni-based Austenite Single Crystals

Superelasticity and Shape Memory Effect in Cu–Al–Mn–V Shape Memory Alloys

Shape Memory and Superelasticity in Polycrystalline Cu–Al–Ni Microwires

Tunable Large Recovery Strain and Wide Response Temperature with Near-Zero Response Interval in Cu-Al-Mn-Fe Single Crystals

Structure and Properties of Ductile Cualmn Shape Memory Alloy Synthesized by Mechanical Alloying and Powder Metallurgy

Enhanced cyclability of superelasticity and elastocaloric effect in Cu and B co-doped Co-Ni-Ga shape memory alloys

MAGNETIC-FIELD-CONTROLLED SHAPE MEMORY EFFECT AND SUPERELASTICITY OF Ni53.2Mn22.6Ga24.2 SINGLE CRYSTAL

Microstructure, superelasticity and shape memory effect by stress-induced martensite stabilization in Cu–Al–Mn–Ti shape memory alloys

Microstructure, Martensitic Transformation and Shape Memory Effect of Polycrystalline Cu-Al-Mn-Fe Alloys

Meso-scopically Homogeneous Superelastic Transformation and Related Elastocaloric Effect in a Textured Ti-based Shape Memory Alloy

Full Shape Memory Effect of Cu-13.5Al-4Ni-6Fe Shape Memory Martensite Single Crystal