Abstract:Pre-deposition of powdered activated carbons (PACs) is an effective method to improve the permeate quality of gravity-driven membrane (GDM) system but always with a limited or even negative effect on its fouling behavior. PAC dosing strategies play dominant roles on the fouling of microfiltration and ultrafiltration membranes under constant flux mode, owing to the alteration of PAC-membrane interactions. Hence, how to further increase the membrane flux in the PAC-GDM system needs more investigation. In this study, the effects of PACs on the fouling by treated domestic wastewater were evaluated during GDM filtration using three different PAC dosing strategies: pre-depositing PACs onto membrane surfaces, and mixing PACs with bulk feeds in reactors totally before filtration and mixing PACs with bulk feeds in reactors periodically during filtration. PACs in three dosing modes all improved the removal of organics, but showed conflict effects on the fouling. Unlike mixed PACs increasing the final flux by more than two times than that obtained in the control system, pre-deposited PACs showed a dramatically negative effect on the flux development with a final value decreased by 75.0%. As demonstrated by the scanning electron microscopy images of biofilm structures and the contents of dissolved organic carbon and adenosine triphosphate in reactors, pre-deposited PAC layer aggravated the accumulation of organics and microorganisms with the formation of a stratified and compact structure, which hindered their back-transport to the bulk water. However, mixed PACs induced the formation of a uniform and porous biofilm, which favored the retained organics and microorganisms migrating back into concentrated waters, especially for pre-mixed PACs. This study links PAC dosing strategies, physical structures of biofilms and spatial distributions of organics and microorganisms, with practical relevance for the hydraulic performance of GDM systems, hopefully leading to a wider application of PAC-GDM systems in wastewater treatment.

Characteristics of the Sludge Filterability and Microbial Composition in PAC Hybrid MBR: Effect of PAC Replenishment Ratio

Effect of powdered activated carbon dosage on sludge properties and membrane bioreactor performance in a hybrid MBR-PAC system

Powdered Activated Carbon - Membrane Bioreactor (PAC-MBR): Impacts of High PAC Concentration on Micropollutant Removal and Microbial Communities

Study on the Influence Factors of MBR-PAC System

Optimization of membrane bioreactors by the addition of powdered activated carbon.

Study on Polypropylene Hollow Fiber Based Recirculated Membrane Bioreactor for Treatment of Municipal Wastewater

Effects of powdered activated carbon dosage on the performance of membrane bioreactors treating biochemical tail water

Hybrid powdered activated carbon-activated sludge biofilm formation to mitigate biofouling in dynamic membrane bioreactor for wastewater treatment

Evaluating the impacts of a high concentration of powdered activated carbon in a ceramic membrane bioreactor: Mixed liquor properties, hydraulic performance and fouling mechanism

The Performance of Hybrid Anaerobic Membrane Bioreactors (AnMBRs) Added with Powdered Activated Carbon (PAC) Based on Different Sludge Retention Times

The impact of powdered activated carbon types on membrane anti-fouling mechanism in membrane bioreactors

Powdered Activated Carbon-MBR Process for Treatment of Micro-polluted Raw Water

Revisiting the effects of powdered activated carbon on membrane fouling mitigation in an anaerobic membrane bioreactor by evaluating long-term impacts on the surface layer.

The effects of powdered activated carbon or ferric chloride on sludge characteristics and microorganisms in a membrane bioreactor

Mechanisms of Fouling Control in Membrane Bioreactors by the Addition of Powdered Activated Carbon

Membrane Fouling Mechanisms and Control in MBR/PAC Process for Treatment of Micro-polluted Source Water

Effect of Powdered Activated Carbon (PAC) on MBR Performance and Effluent Trihalomethane Formation: at the Initial Stage of PAC Addition.

Pre-depositing versus mixing powdered activated carbons for gravity-driven membrane systems during treated domestic wastewater filtration: Permeability stabilization and removal performance

Effect of Dosing Powdered Activated Carbon on Operational Performances of MBR

Comparing Powdered and Granular Activated Carbon Addition on Membrane Fouling Control Through Evaluating the Impacts on Mixed Liquor and Cake Layer Properties in Anaerobic Membrane Bioreactors

Feasibility study of powdered activated carbon membrane bioreactor (PAC-MBR) for source-separated urine treatment: A comparison with MBR