Abstract:Developing high strength and tough silicon carbide (SiC) composite ceramics remains a significant challenge. Here, we report the process of synthesizing fully densified SiC/C composite ceramics using SiC@graphene (SiC@G) core–shell nanoparticles as raw materials through spark plasma sintering (SPS) at 1700°C and 45 MPa. The SiC@G nanoparticles were synthesized by the fluidized bed chemical vapor deposition (FB‐CVD) method. During the sintering process, graphene coated, the surface of nanosized SiC particles exhibited high electrical and thermal conductivity, facilitating the uniform distribution of pulse current and heat and promoting the densification of SiC/C composite ceramics. For the prepared SiC/C composite ceramic, the carbon content reaches as high as 14.3 wt%, with carbon uniformly dispersed in a particulate form within the SiC matrix and stable interface bonding. Consequently, the introduction of excessive carbon does not compromise the hardness (28.8 GPa) and flexural strength (517.34 MPa) of the SiC/C composite ceramics. Furthermore, the carbon particles effectively enhance the toughness of the SiC/C composite material through mechanisms such as crack branching, bridging, and deflection, resulting in a fracture toughness of 7.38 MPa m1/2. The preparation strategy in this study provides a novel route for sintering SiC composites with high‐carbon content through nanoscale powder structure design, resulting in the attainment of high‐performance lightweight composite materials.

One-step Introduction of ZrC-SiC Inside Carbon Fabric to Fabricate High Homogeneous and Damage-Tolerant Composite Inspired by Vibration

Enhanced mechanical properties and thermal shock resistance of Cf/ZrB2-SiC composite via an efficient slurry injection combined with vibration-assisted vacuum infiltration

Architectural Engineering Inspired Method of Preparing C-f/ZrC-SiC with Graceful Mechanical Responses

Fabrication and Properties of Short Carbon Fiber-ZrB2 Ceramic Matrix Composites

Achieving synergy of load-carrying capability and damage tolerance in a ZrB2-SiC composite reinforced through discontinuous carbon fiber

Fabrication and microstructure evolution of Csf/ZrB2-SiC composites via direct ink writing and reactive melt infiltration

The Fabrication and Mechanical Properties of SiC/ZrB2 Laminated Ceramic Composite Prepared by Spark Plasma Sintering

Rolling Compacted Fabrication of Carbon Fiber Reinforced Ultra-High Temperature Ceramics with Highly Oriented Architectures and Exceptional Mechanical Feedback

Fabrication and mechanical properties of ZrB2–SiCw ceramic matrix composite

Using PyC Coated Short Chopped Carbon Fiber to Tackle the Dilemma Between Toughness and Strength of ZrC-SiC

Effects of Short Carbon Fiber on Mechanical Properties of ZrB2-SiC Ultra-high Temperature Ceramics

Mechanical Properties of Short Carbon Fiber Reinforced ZrB2–SiC Ceramic Matrix Composites

Continuous carbon fiber reinforced ZrB2-SiC composites fabricated by direct ink writing combined with low-temperature hot-pressing

Enhanced strength and toughness of SiC/C composite ceramics via SiC@graphene core–shell nanoparticles

Damage Mechanism Analysis to the Carbon Fiber and Fiber-Ceramic Interface Tailoring of Cf/ZrC-SiC Using PyC Coating

Processing, microstructure, and mechanical properties of chopped SiC fibers reinforced ZrB2–hBN–based composites

Microstructures and Enhanced Mechanical Properties of (Zr, Ti)(C, N)-Based Nanocomposites Fabricated by Reactive Hot-Pressing at Low Temperature

Effect of SiC on the anti-ablation resistance and flexural strength of (Hf-Ta-Zr)C-C/C composites

From Ferroconcrete to Cf/UHTC-SiC: A Totally Novel Densification Method and Mechanism at 1300 °C Without Pressure

Using flexible hydrothermal carbon-coated continuous carbon fiber to fabricate Cf/ZrB2-SiC composites by fused deposition modeling and precursor infiltration pyrolysis

Fabrication of (SiC-AlN)/ZrB2 Composite with Nano-Micron Hybrid Microstructure via PCS-Derived Ceramics Route