Abstract:Metallic glasses are frequently used as structural materials. Therefore, it is important to develop methods to predict their mechanical response as a function of the microstructure prior to loading. We develop a coarse-grained spring network model, which describes the mechanical response of metallic glasses using an equivalent series network of springs, which can break and re-form to mimic atomic rearrangements during deformation. To validate the model, we perform simulations of quasistatic, uniaxial tension of Lennard-Jones and embedded atom method (EAM) potentials for Cu$_{50}$Zr$_{50}$ metallic glasses. We consider samples prepared using a wide range of cooling rates and with different amounts of crystalline order. We show that both the Lennard-Jones and EAM models possess qualitatively similar stress $\sigma$ versus strain $\gamma$ curves. By specifying five parameters in the spring network model (ultimate strength, strain at ultimate strength, slopes of $\sigma(\gamma)$ at $\gamma=0$ and at large strain, and strain at fracture where $\sigma=0$), we can accurately describe the form of the stress-strain curves during uniaxial tension for the computational studies of Cu$_{50}$Zr$_{50}$, as well as recent experimental studies of several Zr-based metallic glasses. For the computational studies of Cu$_{50}$Zr$_{50}$, we find that the yield strain distribution is shifted to larger strains for slowly cooled glasses compared to rapidly cooled glasses. In addition, the average number of new springs and their rate of formation decreases with decreasing cooling rate. These effects offset each other at large strains, causing the stress-strain curve to become independent of the sample preparation protocol in this regime. In future studies, we will extract the parameters that define the spring network model directly from atomic rearrangements that occur during uniaxial deformation.

Strength Criterion and Temperature Dependent Strength Model of Metallic Glasses

A Model on the Coupling Between Cyclic Fatigue and Microstructure Evolution in a Metallic Glass

Modelling and physical analysis of the high-temperature rheological behavior of a metallic glass

ADVANCES IN FRACTURE BEHAVIOR AND STRENGTH THEORY OF METALLIC GLASSES

Fatigue and fracture behavior of bulk metallic glass

Insight on the Process Ability of Bulk Metallic Glasses by Thermo-Mechanical Analysis and Dynamic Mechanical Analysis

Theoretical Prediction of Temperature Dependent Shear Modulus of Bulk Metallic Glasses

Correlation between fractal dimension and strength of brittle bulk metallic glasses

Characterizing the mechanical response of metallic glasses to uniaxial tension using a spring network model

A meso-mechanical constitutive model of bulk metallic glass composites considering the local failure of matrix

Fracture Mechanism of Some Brittle Metallic Glasses

Tensile Fracture Criterion of Metallic Glass

Atomic-scale Mechanisms of Tension–compression Asymmetry in a Metallic Glass

The Temperature-Dependent Strength of Metals: Theory and Experimental Validation

On the mechanism of deformation and failure in bulk metallic glasses

Strength, Plasticity and Brittleness of Bulk Metallic Glasses under Compression: Statistical and Geometric Effects

Tensile fracture morphologies of bulk metallic glass

Elucidating How Correlated Operation of Shear Transformation Zones Leads to Shear Localization and Fracture in Metallic Glasses: Tensile Tests on Cu Zr Based Metallic-Glass Microwires, Molecular Dynamics Simulations, and Modelling

A Failure Model for Bulk Metallic Glass Based on Strain Rate-Correlated Softening Mechanism

Mechanical Behavior of Fe75Mo5P10C7.5B2.5 Bulk-Metallic Glass under Torsional Loading

On the Mechanism of Deformation Localization and Homogeneous Flow in Bulk Metallic Glasses