Abstract:Dynamic mechanical relaxation processes of amorphous alloys are very important to understand plastic deformation, glass transition phenomenon, diffusion behavior and crystallization. How to establish the correlation between mechanical properties and mechanical relaxation modes is one of key issues. In the current research, with the help of dynamic mechanical analysis (DMA), dynamic mechanical behavior of Zr$_{50}$Cu$_{40}$Al$_{10}$ bulk metallic glass from room temperature to supercooled liquid region was probed. In parallel, based on the uniaxial tensile tests, high-temperature flow behavior of Zr$_{50}$Cu$_{40}$Al$_{10}$ metallic glass around glass transition temperature were investigated. Dynamic mechanical behavior and high temperature deformation behavior were discussed in the framework of quasi-point defects theory. The results demonstrated that main $\alpha $ relaxation process of metallic glass can be well described by the quasi-point defects theory. Based on internal friction of Zr$_{50}$Cu$_{40}$Al$_{10}$ metallic glass, activation energy of elementary movement of atoms $U_\beta$ is 0.63 eV. In addition, correlation factor $\chi $ corresponding to concentration of the quasi-point defects in solid glass remains almost constant below the glass transition temperature. When the temperature above the glass transition temperature, the correlation factor $\chi $ increases by increasing the temperature (below the crystallization temperature). Finally, high temperature flow behavior in tensile mode near the glass transition temperature of Zr$_{50}$Cu$_{40}$Al$_{10}$ metallic glass was studied. The normalized viscosity decreases with increasing strain rate at low temperatures or high strain rates, indicating a non-Newtonian flow behavior. Whereas Newtonian flow behavior is observed at higher temperatures and lower strain rates. The apparent viscosity is affected by temperature and strain rate. High-temperature flow behavior of Zr$_{50}$Cu$_{40}$Al$_{10}$ metallic glass was described by stretched exponential function and free volume theory. Specifically, experimental master curve of the high temperature flow behavior of metallic glass is in good agreement with the prediction of the quasi-point defects theory, which provides a new insight on understanding of viscous effects during high temperature deformation of solid glasses.

On the Mechanism of Deformation Localization and Homogeneous Flow in Bulk Metallic Glasses

On the mechanism of deformation and failure in bulk metallic glasses

Inhomogeneous Deformation in Bulk Metallic Glasses: FEM Analysis

Finite-element analysis for high-temperature deformation of bulk metallic glasses in a supercooled liquid region based on the free volume constitutive model

A Finite-Deformation Constitutive Model of Bulk Metallic Glass Plasticity

High temperature deformation behaviors of the Zr 63.36 Cu 14.52 Ni 10.12 Al 12 bulk metallic glass

A failure mechanism based constitutive model for bulk metallic glass

A Hierarchically Correlated Flow Defect Model for Metallic Glass: Universal Understanding of Stress Relaxation and Creep

Constitutive model for high temperature deformation behavior of Ti–Zr–Ni–Be bulk metallic glass in supercooled liquid region

A finite-deformation constitutive model for bulk metallic glass composites

Constitutive description of Bulk Metallic Glass composites at high homologous temperatures

The multi-axial deformation behavior of bulk metallic glasses at high homologous temperatures

Modelling and physical analysis of the high-temperature rheological behavior of a metallic glass

DYNAMIC RELAXATION CHARACTERISTICS AND HIGH TEMPERATURE FLOW BEHAVIOR OF ZR-BASED BULK METALLIC GLASS

A meso-mechanical constitutive model of bulk metallic glass composites considering the local failure of matrix

Insight on the Process Ability of Bulk Metallic Glasses by Thermo-Mechanical Analysis and Dynamic Mechanical Analysis

Mesoscopic Constitutive Model for Predicting Failure of Bulk Metallic Glass Composites Based on the Free-Volume Model

Coupling Effects of Thickness and Aspect Ratio on Deformation Behavior of Cu50Zr50 Metallic Glass

Integrating Dynamic Relaxation with Inelastic Deformation in Metallic Glasses: Theoretical Insights and Experimental Validation