Abstract:Slot-type casing treatment generally has a great potential of enhancing the operating range for tip-critical compressor rotors, however, with remarkable efficiency drop. In the first part of this two-part words, several configurations of slot casing treatment were tested in a 1.5 transonic compressor stage by steady simulations. One kind of arc-curve skewed slot contributed to considerable stall margin improvement with minimum efficiency loss. However, interaction between main passage and casing treatment was inherently unsteady. Steady simulation was inadequate to provide accurate compressor performance prediction and precise flow field details. Thus, this part was aimed at clarifying the differences between steady and unsteady simulations. The unsteady interaction process between main passage flow and slots were also detailed interpreted. Unsteady simulation was conducted by applying sliding interface between rotor passage and arc-curved skewed slots. Firstly, differences of compressor performance were examined between steady and unsteady methods. Results showed that steady simulation underestimated stall margin improvement and efficiency drop by casing treatment. Then analysis on aerodynamic parameters and specific flow fields were carried out at smooth casing peak efficiency and casing treatment near stall conditions. Unsteady simulation provided more than 50% larger mass flow rate entering or exiting slots opening surfaces at both operating conditions. It revealed that in unsteady simulation, casing treatment contributed to stronger suction/injection process, which promoted tip flow fields more effectively than steady simulation. Axial velocity deficit at rotor outlet was refilled by slots more effectively in unsteady simulation. In steady result, a large low momentum blockage existed inside rotor passage near tip region and prevented flow from entering the passage at near stall condition. While in unsteady simulation at the same condition, incoming flow was still able to travel across rotor passage in a high velocity. Further, instantaneous flow fields near tip region and inside the slots were particularly examined during a rotor blade passing period to elaborate the unsteady flow interaction. The mid-pitch surface of a representative slot was selected to represent the re-circulation procedure inside slots. Unsteady flow fields and spectrum analysis manifested that tip flow field was dominated by slots passing, while re-circulation process inside slots was dominated by blade passing. Low pressure region inside the blade passage facilitated the injection process. Circulation inside slots lagged behind the pressure variations beneath slots. When the slot was striding over the blade tip, intense injection didn’t emerge immediately beneath slots’ front portion. Until the high pressure region moved away from the slot opening surface, fluids inside the slots started to inject into the main flow in high speed.

Calculation of Stall Margin Enhancement with Micro-Tip Injection in an Axial Compressor

Stall Margin Improvement in an Axial Compressor by Continuous and Pulsed Tip Injection

Tip Injection in Transonic Axial Compressor Rotor

Experimental investigation of transient characteristics of mild surge and diffuser rotating stall in a centrifugal compressor with vaned diffuser

Modeling For Tip Clearance Effects On Stall-Onset Condition In Transonic Axial Compressors

Numerical Study on the Response of Tip Leakage Flow Unsteadiness to Micro Tip Injection in a Low-Speed Isolated Compressor Rotor

Calculation of Flow Instability Inception in High Speed Axial Compressors Based on an Eigenvalue Theory

An improved stall prediction model for axial compressor stage based on diffuser analogy

Design Optimization and Flow Analysis of Discrete Tip Injection in a Transonic Compressor Based on Nonlinear Harmonic Method and Endwall Blockage Attenuation

Computational Model for Stall Inception and Nonlinear Evolution in Axial Flow Compressors

A Method of Stall and Surge Prediction in Axial Compressors Based on Three-Dimensional Body-Force Model

Numerical Study of Stall Inception in A Transonic Axial Compressor Rotor Based on the Throttle Model

Numerical investigation of the unsteady tip leakage flow and rotating stall inception in a transonic compressor

Effects of Sloped Trench Casing Treatment Combined with Air Injection on Stall Triggering Factor of a 1.5 Stage Axial Flow Compressor

Improvement in the Stability of A Turbocharger Centrifugal Compressor by Tip Leakage Control

Stability Improvement of a High-Pressure Ratio Centrifugal Compressor by Flow Injection

Analysis on slot-type casing treatment injection flow in an axial transonic compressor

Numerical Investigation on Slot Casing Treatment in a Transonic Axial Compressor Stage: Part 2 — Unsteady Simulations and Analysis

The Effects of Wet Compression and Blade Tip Water Injection on the Stability of A Transonic Compressor Rotor

Some Effects of Non-Axisymmetric Tip Clearance Layout on Axial Compressor Aerodynamics

Unsteady near-stall flow mechanisms in a transonic compressor rotor at different rotating speeds