Abstract:The phased array laser ultrasonic technology is suitable for non-destructive testing (NDT) of coating/substrate structure due to its excellent ability to generate ultrasonic waves with a high signal-to-noise ratio and flexible regulation. This research focuses on the propagation characteristics of ultrasonic waves generated by phased array laser in the coating/substrate (Ni/Al) structure. Considering the spatiotemporal distribution of phased array laser energy and the boundary conditions at the interface, the finite element model of phased array laser-generated ultrasonic waves in the coating/substrate structure was established. Furthermore, the propagation characteristics of bulk wave and Rayleigh wave were investigated, and the influences of element spacing and time delay of phased array laser on the steering characteristics of bulk wave and tuning characteristics of Rayleigh wave were analyzed. Finally, the accuracy of the simulation was verified through experiments based on the laser ultrasonic detection system. The simulation and experimental results indicate that the phased array laser can enhance the bulk wave at the steering direction, with the best enhancement effect occurring when the steering direction coincides with the maximum radiation direction in the directivity pattern of the laser-generated bulk wave. Besides, phased array laser can enhance certain frequency components of tuned Rayleigh waves by adjusting element spacing or time delay. The enhancement effect on low-frequency components is more significant with a short time delay or large element spacing. In contrast, the enhancement effect on high-frequency components is more significant with a long time delay or small element spacing. The research work in this paper has clarified the propagation characteristics for different modes of ultrasonic waves generated by phased array laser in the coating/substrate structure, which can provide a theoretical basis for subsequent defect detection.

Improvement of Focused Ultrasonic Beam Generated by Laser Phased Array: Theoretical Analysis

The New Research on Ultrasonic Wave Generated by Laser Pulse

Experimental study on the integrated optimization of focus length and transducer aperture for phased array beam

Acoustic field directivity of longitudinal wave generated by oblique laser based on combustion wave

Spatial Beam Shaping of a Focused Laser with Quasi-Near-field Characteristics Based on a Concatenated Fuzzy Matching Algorithm

Focal Law Optimization and Acoustic Field Simulation of PAUT on CFRP Radii

Numerical Simulation of Enhanced Photoacoustic Generation and Wavefront Shaping by a Distributed Laser Array

Influence of Focal Length on Focusing Performance of EMAT Phased Arrays

Influence of Phased Array Element Size on Beam Focusing Behavior

A Flat Laser-Generated Focused Ultrasound Transmitter with Extended Focal Depth

Numerical Aanalysis of Ultrasonic Guided Waves Generated by Pulsed Laser in Plate

Beam Quality Improvement of Coherent Beam Combining by Gradient Power Distribution Hexagonal Tiled-Aperture Large Laser Array

Influence Of Phased Array Pattern On Beam Directivity

Experimental measurement and analysis of the lateral resolution of phased array ultrasonic detection

Phased-Array Laser Ultrasonic Testing with Sparse Total Focusing Imaging Method

Propagation Characteristics of Ultrasonic Waves Generated by Phased Array Laser in Coating/Substrate Structure

Improving laser-EMAT ultrasonic energy conversion efficiency using surface constraint mechanism

Laser Ultrasonic Frequency-Domain Imaging and Phase Weighted Optimization Based on Full Matrix Capture

Focused Beam Control for Ultrasound Surgery with Spherical-Section Phased Array: Sound Field Calculation and Genetic Optimization Algorithm.

Correction of Linear-Array Lidar Intensity Data Using an Optimal Beam Shaping Approach

The Analysis on the Features of The Propagating Waves Control of the Ultrasonic Phased Array