Abstract:As the optical penetration depth and thermal diffusion effect are small, shear waves and longitudinal waves generated by a laser pulse in thermoelastic regime are generally weak in metallic materials. The method of laser ultrasonic is rarely applied to inspect the inner cracks. In this paper, phased array laser ultrasonic is developed to focus and steer shear waves and longitudinal waves, and obtain inner crack characteristics. Firstly, a two-dimensional laser phased array finite element model is established. Secondly, based on this model, a study on numerical simulation of interaction between shear waves and cracks is conducted by adjusting time delay of laser phased array. It is found by analysis that the position of cracks can be determined by monitoring changes of polarity of shear-tip-shear (STS) diffraction received on the surface of metallic materials and the depth of cracks can be determined by the time of flight of STS diffraction and shear-tip-longitudinal (STL) diffraction. Last of all, a study on numerical simulation of interaction between longitudinal waves and cracks is also conducted. This study provides a possible method for the detection of inner cracks in metallic materials.

Numerical Aanalysis of Ultrasonic Guided Waves Generated by Pulsed Laser in Plate

Effect of Variable Cross-Section Rod on Laser-Induced Surface Acoustic Waves.

Simulations Of Ultrasonic Waveform Excited By Pulsed Laser By Using Finite Element Method

Improvement of Focused Ultrasonic Beam Generated by Laser Phased Array: Theoretical Analysis

A Study of Inner Crack Testing with the Laser Phased Array Method.

Numerical Study for Surface-breaking Crack Detection on A Cylinder Using Laser-generated Ultrasound

Simulation of Laser-Generated Longitudinal and Shear Ultrasonic Waves in A Diamond Anvil Cell by the Finite Element Method

Numerical Simulation of Laser Induced Ultrasonic in a Diamond Anvil Cell by Finite Element Method

Simulations Of Bulk Ultrasonic Waveform Excited By Pulsed Laser For Two-Layer Medium Using Finite Element Method

Mechanisms of Laser-Generated Ultrasound in Plates

The New Research on Ultrasonic Wave Generated by Laser Pulse

Intense Laser Beam Guiding in Self-Induced Electron Cavitation Channel in Underdense Plasmas

Numerical Simulation of Laser-Generated Lamb Wave by Finite Element Method in Thin Transversely Isotropic Laminate Composite

Finite Element Modeling Of Bulk Ultrasonic Waves Generated By Ring-Shaped Laser Illumination In A Diamond Anvil Cell

Numerical Simulations of the Guided Elastic Waves Generated by Laser-Induced As and Es in Hollow Cylinders

Effect of oblique force source induced by laser ablation on ultrasonic generation.

Analysis Of Nonlinear Self-Focusing Phenomenon In High-Power Laser System Based On Ray-Tracing

Numerical analysis of wave-type heat transfer propagating in a thin foil irradiated by short-pulsed laser

Simulation of ultrasound generation by a pulsed laser line-source in an anisotropic medium with the finite element method

Simulation and experiment of laser ultrasound field under ablation mechanism

Analysis of the Far Spatial Coherent Suppressed Single Peak Field Distribution of A Rectangular Wave-Guide Laser