Abstract:In this article, the interaction of a laser-generated Rayleigh wave with a subsurface crack has been simulated in detail. The finite element method (FEM) was used to model a subsurface hollow with a rectangular shape, which was used to represent the subsurface crack. By studying the contributions of all of the reflected and mode-converted signals from the subsurface crack, the arrival time of those signals and the mechanism underlying their occurrence could be fully explained. The first negative peak of the reflected waves originated from the top corner of the subsurface crack. The arrival time of this peak first decreased and then increased as the depth of the subsurface crack increased, which was due to the mode conversion when the diffracted bulk mode interacted with the free surface. However, when the depth of the crack remained the same and the height of the subsurface crack increased, the arrival time of the first negative peak of the reflected waves remained the same but the arrival time of the following reflected peaks maintained a linear relationship with the height of the crack. Furthermore, the sources and mechanism of the reflected waves were studied. It was found that the interval time of the peaks was dependent on the height of the crack, and a method for measuring the height of subsurface cracks has been proposed in this paper. The results of the simulation enable the quantitative measurement of the size of subsurface cracks and the height measuring method has the potential to measure the height of subsurface defects and structures.

Numerical Simulations of the Guided Elastic Waves Generated by Laser-Induced As and Es in Hollow Cylinders

Theoretical Investigation of the Laser-Generated Guided Waves in Hollow Cylinders

Excitation of Axisymmetric and Non-Axisymmetric Guided Waves in Elastic Hollow Cylinders by Magnetostrictive Transducers

Excitation of Dominant Flexural Guided Waves in Elastic Hollow Cylinders Using Time Delay Circular Array Transducers

Simulations Of Bulk Ultrasonic Waveform Excited By Pulsed Laser For Two-Layer Medium Using Finite Element Method

Numerical Simulation of Laser-Generated Lamb Wave by Finite Element Method in Thin Transversely Isotropic Laminate Composite

Numerical Simulation of Laser Induced Ultrasonic in a Diamond Anvil Cell by Finite Element Method

Simulation of Laser-Generated Longitudinal and Shear Ultrasonic Waves in A Diamond Anvil Cell by the Finite Element Method

Numerical Simulation of the Interaction of Laser-Generated Rayleigh Waves with Subsurface Cracks

Simulation Of Elastic Waves In Viscoelastic Solids Using Finite Elements Method

Finite Element Modeling Of Bulk Ultrasonic Waves Generated By Ring-Shaped Laser Illumination In A Diamond Anvil Cell

Laser-generated Rayleigh Wave for Width Gauging of Subsurface Lateral Rectangular Defects

Intense Laser Beam Guiding in Self-Induced Electron Cavitation Channel in Underdense Plasmas

Numerical Simulation Of Laser Excited 3d Acoustic Field Of Semi-Infinite Isotropic Solid

Elastic waves in piezoelectric cylinders with sectorial cross-section

Influences of Elastic and Viscous Moduli on Laser-Generated Lamb Waves in Viscoelastic Plates

Modeling Laser-Generated Guided Waves in Bonded Plates by the Finite Element Method

Guided Wave Propagation and Mode Differentiation in the Layered Magneto-Electro-Elastic Hollow Cylinder

Propagating and evanescent elastic waves in cylindrical waveguides of arbitrary cross section

Simulations Of Ultrasonic Waveform Excited By Pulsed Laser By Using Finite Element Method

Three-Dimensional Coupled-Wave Theory Analysis of A Centered-Rectangular Lattice Photonic Crystal Laser with A Transverse-Electric-Like Mode