Abstract:Because of the special crystallization structure (hexagonal close-packed structure), it is difficult to achieve the synergy between strength and ductility in Mg alloys. High strength can be obtained through alloying addition or low-temperature deformation, but these methods usually cause the extremely poor ductility (less than 5%). Meanwhile, solid solution treatment or considerable alloying addition, such as RE, Li, can probably possess the superior ductility, whereas these techniques commonly result in the insufficient strength (poor than 100 MPa). However, Mg-1Mn binary alloy developed in our previous work extruded at a low temperature exhibiting the superior ductility (38.8%) with medium yield strength (204.3 MPa) has been recommended as one of the candidates to improve the strength-ductility synergy in Mg alloys. In this paper, a low-alloyed Mg-1Mn-1Al alloy has been developed to overcome the disequilibrium between strength and ductility. The alloy has a superior elongation capacity (- 32%) and a reasonably high tensile yield strength (- 280 MPa) at room temperature. The reasonably high yield strength of the alloy can be dominantly attributed to the refined DRXed grains based on the Hall-Petch relationship, intensified basal texture leading to the basal slip activity difficultly, a great number of nano-scaled Al8Mn5 secondary particles pinning the dislocation motion through the dispersion hardening and the multi-heterogeneous microstructure inducing bask-stress strengthening as dislocation pile-up. The superior elongation capacity of the alloy can be mainly explained as the ultra-fined microstructure through reducing the critical resolved shear stress (CRSS) ratio between prismatic slip and basal slip that favors prismatic slip activity to accommodate basal slip.

Significant Improvement in the Strength of Mg-Al-Zn-Ca-Mn Extruded Alloy by Tailoring the Initial Microstructure

Microstructure and Mechanical Properties of Extruded Mg–Zn–Mn–Ca Alloys

Improvement of Strength-Ductility Balance by Mn Addition in Mg–Ca Extruded Alloy

Enhanced Mechanical Properties in Fine-Grained Mg–1.0Zn–0.5Ca Alloys Prepared by Extrusion at Different Temperatures

Microstructure, Tensile Properties and Work Hardening Behavior of an Extruded Mg–Zn–Ca–Mn Magnesium Alloy

Mechanistic Study of Mg-Mn-Al Extrusion Alloy with Superior Ductility and High Strength

Improving Toughness of a Mg2Ca-containing Mg-Al-Ca-Mn Alloy Via Refinement and Uniform Dispersion of Mg2Ca Particles

Bimodal Microstructure Evolution and Strength-Ductility Co-Enhancement of Hot-Extruded Al–La–Mg–Mn Alloy

Development of a High-Strength Mg Alloy with Superior Ductility Through a Unique Texture Modification from Equal Channel Angular Pressing

Tailoring the Microstructure, Mechanical Properties and Damping Capacities of Mg–4Li–3Al–0.3Mn Alloy Via Hot Extrusion

The Microstructural Features and Strengthening Mechanisms of Mg-Al-Zn-Ca-(RE) Extruded Alloys Having High-Volume Fractions of Second-Phase Particles

Microstructures and Mechanical Properties of As-Cast and As-Extruded Mg-4.50zn-1.13ca (wt%) Alloys

A High-Ductility Mg–Zn–Ca Magnesium Alloy

Microstructure and Mechanical Properties of Extruded Mg–1Ca–1Zn–0.6Zr Alloy

Ultrahigh Strength Mg-Al-Ca-Mn Extrusion Alloys with Various Aluminum Contents

Enhanced Strength–Ductility Synergy of Mg-Al-Sn-Ca Alloy via Composite Asymmetric Extrusion

Improving the Microstructure and Mechanical Properties of Magnesium-Alloy Sheets with a New Extrusion Method

The Improved Mechanical Properties of Mg-Zn-Nd Alloy with Ca Addition Via Grain Refinement and Nano Precipitates

Microstructures and Mechanical Properties of Hot-extruded Mg-6Zn-xCu-0.6Zr(x=0,0.5,1.0,1.5) Alloys

Achieving exceptional ultrahigh-strength in low-alloy Mg-1Al-1Ca-0.4Mn (wt%) alloy by regulating bimodal microstructure

Microstructure and Mechanical Properties of Extruded Mg-Zn-Ce-Zr Alloy Rods