Abstract:The resistive switching memory effects in metal-insulator-metal devices with aluminium (Al) as top electrode (TE) and bottom electrode (BE). A solution processed active layer consisting of zinc oxide (ZnO) nanoparticles embedded in an insulating polyvinyl alcohol (PVA) matrix and polymer poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) has been studied by using flexible polyethylene terephthalate (PET) substrates. The current-voltage (I-V) measurements of hybrid Al/ZnO-PVA/PEDOT:PSS/Al/flexible PET substrate device exhibited a non-volatile bistable resistive switching behaviour, which is attributed to the trapping, storage and transport of charges in the electronic states of the ZnO nanoparticles. The performance of hybrid device is significantly enhanced over control Al/PEDOT:PSS/Al and Al/ZnO-PVA/Al devices due the presence of PEDOT:PSS polymer. This PEDOT:PSS improves the performance of oxygen ions (holes) migration toward BE and protect back oxygen vacancies (electrons) migrate toward BE from ZnO-PVA composites which may reduces the leakage current, as a result, increased the 'ON state/OFF state' current ratio of 7.9 × 103 times. The fabricated hybrid device showed high ON/OFF switching current ratio larger than five orders of magnitude with low operating voltages. It is observed that, the existence of two conducting states, namely, low conductivity state (OFF state) and high conductivity state (ON state), exhibiting bistable behaviour. The state of the device was maintained even after removal of the applied bias, indicating the non-volatile memory. The observed current-time response showed good memory retention behaviour of the fabricated devices. The excellent stability and retention performances of hybrid device verify the reliability of this device and demonstrate their potential for application in non-volatile bistable memory device. The carrier transport mechanism of the bistable behaviour for the fabricated non-volatile organic bistable devices structures is described on the basis of the I-V experimental results by analyzing the effect of space charge and electronic structure. Interestingly, the device performance was not degraded and remains identical even after bending the device from 60-120° angles, which indicates high potential for flexible non-volatile bistable memory device applications. This demonstration provides a class of memory devices with the potential for future flexible electronics applications.

Resistive Switching Behavior and Mechanism of Room-Temperature-fabricated Flexible Al/TiS2-PVP/ITO/PET Memory Devices

From dead leaves to sustainable organic resistive switching memory

Highly Flexible Resistive Switching Memory Based on the Electronic Switching Mechanism in the Al/TiO 2 /Al/Polyimide Structure.

A flexible nonvolatile resistive switching memory device based on ZnO film fabricated on a foldable PET substrate

Resistive switching and synaptic learning performance of a TiO2 thin film based device prepared by sol–gel and spin coating techniques

Implementation of Stable Nonvolatile Resistive Switching Behaviors in TiO2 Nanoparticle‐Incorporated 2D Layered Halide Perovskite‐Based Devices

Large Nonvolatile Multiple-State Resistive Switching in TiO2−δ/PMN-PT Field-Effect Device

Flexible resistive switching bistable memory devices using ZnO nanoparticles embedded in polyvinyl alcohol (PVA) matrix and poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS)

Compliance current dependent multilevel resistive switching in Titanium dioxide nanosheet based memory devices

Uniform Bipolar Resistive Switching Properties with Self-Compliance Effect of Pt/TiO2/p-Si Devices

Stabilizing Resistive Switching Performances of TiN/MgZnO/ZnO/Pt Heterostructure Memory Devices by Programming the Proper Compliance Current

Reliable Resistive Switching Behaviour of Ag/Ta2O5/Al2O3/p++-Si Memory Device

Resistive Switching and Synaptic Behaviors of Tan/Al2o3/Zno/Ito Flexible Devices with Embedded Ag Nanoparticles

A novel fabrication method for titania resistive switching device.

Polymer/TiO2 Nanoparticles Interfacial Effects on Resistive Switching under Mechanical Strain

Coexistence of Bipolar and Unipolar Resistive Switching Characteristics of Thin TiO2 Film Grown on Cu Foil Substrate for Flexible Nonvolatile Memory Device

High Speed and Multi-Level Resistive Switching Capability of Ta2O5 Thin Films for Nonvolatile Memory Application

Novel Covalent-Organometallic Polymer for Highly Stable Nano-Resistive Switching Memories

Effect of Bottom Electrode Materials on Resistive Switching of Flexible Poly(n-Vinylcarbazole) Film Embedded with TiO2 Nanoparticles

Flexible Nonvolatile Resistive Memory Devices Based on SrTiO3 Nanosheets and Polyvinylpyrrolidone Composites

Resistive Switching Characteristics of Zno/A-Tio2 Bilayer Film Fabricated on Pet/Ito Transparent and Flexible Substrates