Abstract:The effects of thermal treatments on metallic glass nanolaminates (NLs), with a composition of Zr$_{24}$Cu$_{76}$ and Zr$_{61}$Cu$_{39}$ and a bilayer period of 50 nm, were explored to control their mechanical properties through annealing-induced atomic structure modifications, structural relaxation, and partial crystallisation. Annealing treatments up to 330 °C ($T$ < $T_g$, the glass transition temperature) maintain the amorphous structure of the NLs, while inducing atomic structural relaxation, densification, and free volume annihilation, reducing the formation of corrugations on fracture surfaces. Atom probe tomography measurements reveal that annealing at 330 °C for 60 mins also causes intermixing between layers, altering their compositions to Zr$_{44}$Cu$_{56}$ and Zr$_{55}$Cu$_{45}$ with increased mixing enthalpy. Moreover, the NLs exhibit superior thermal stability against crystallisation compared to their monolithic counterparts, remaining amorphous up to 420 °C, while the monolithic Zr$_{24}$Cu$_{76}$ and Zr$_{61}$Cu$_{39}$ films are crystalline at 390 °C, as a result of chemical interdiffusion and the heterogeneous NL structure of delaying the onset of crystallisation. Annealing treatments $T$ > $T_g$ ($\sim$420 °C) induce partial crystallisation, forming Cu-Zr-based intermetallic and Zr-oxide phases, whereas annealing $T$ < $T_g$ (330 °C) retains a visible layer structure. Nanoindentation analyses show a progressive increase in elastic modulus and hardness for higher annealing temperatures as a result of structural relaxation and likely nanocrystal formation, with a maximum hardness equal to 7.6 $\pm$ 0.2 GPa obtained after heat treatment at 420 °C for 60 mins and exceeding the rule-of-mixtures. These results highlight the potential of thermal treatments to tailor the structural, mechanical and thermal properties of metallic glass NLs.

The Evolution of Structural and Elastic Properties of a Zr-based Metallic Glass Upon Annealing below Glass Transition Temperature

Structural transformation and rheological processes in bulk metallic glass Zr41Ti14Cu12.5Ni10Be22.5

Tensile Elastic Behavior of A Zr-Cu-Ag-Al Bulk Metallic Glass

Reversible structural relaxation and crystallization of Zr62Al8Ni13Cu17 bulk metallic glass

Structural Evolution in Bulk Metallic Glass under High-Temperature Tension

Mechanical Behavior of A Zr-Based Metallic Glass at Elevated Temperature under High Strain Rate

Isothermal Stability and Selected Mechanical Properties of Zr48Cu36Al8Ag8 Bulk Metallic Glass

Evolution of B19’ phase during annealing and its influence on the mechanical properties of Zr45Cu45Al10 metallic glass composites

Elastic Properties and Glass Forming Ability of the Zr$_{50}$Cu$_{40}$Ag$_{10}$ Metallic Alloy

Structural relaxation driven increase in elastic modulus for a bulk metallic glass

Thermal modification of ZrCu metallic glass nanolaminates: Structure and mechanical properties

Breakdown of One-to-One Correspondence in Energy and Volume in a High-Pressure Heat-Treated Zr-Based Metallic Glass During Annealing

Atomic Dynamics Transition in a Cu-Zr-Al Metallic Glass

High-pressure annealing driven nanocrystal formation in Zr50Cu40Al10 metallic glass and strength increase

Mechanical properties and thermal stability of thin film metallic glass compared to bulk metallic glass from ambient to elevated temperatures

The effect of thermal history on the atomic structure and mechanical properties of amorphous alloys

Delayed elasticity of metallic glasses: Loading time and temperature dependences of the anelastic relaxation

Nanoscale Structural Evolution and Anomalous Mechanical Response of Nanoglasses by Cryogenic Thermal Cycling

Atomic-level mechanism of elastic deformation in the Zr-Cu metallic glass

Activation energy spectrum for relaxation and polyamorphism in an ultra-viscous metallic glass former

Microscopic Structural Evolution during Ultrastable Metallic Glass Formation