Abstract:The analysis of ash deposition samples by electron microscopy (EM), scanning electron microscopy (SEM)/energy dispersive scanning (EDS), and X-ray diffraction (XRD) was carried out at three sampling points of a one-dimensional furnace (sampling temperatures were TL5 = 960 °C, TL6 = 855 °C, and TL7 = 820 °C, respectively). The improvement of ash deposition characteristics of biomass combustion with the different addition ratios of coal fly ash (CFA) (Mr = 1:1, 1.5:1 or 2:1) and the heterogeneous removal of gas phase alkali metal heterogeneous were studied. The results showed that under the condition of Mr = 1:1, the ash sample presented a three-dimensional porous loose structure like "coral reef" with the rice husk ash as the skeleton and the combustion products of CFA as the bonding point. The spherical and filamentous crystals mainly composed of SiO2, Al2O3, and silicates were distributed in the slag, and the surfaces of these crystals were accompanied by the eutectic composite salt of K-Al-Si with a high melting point, reflecting the heterogeneous curing effect of CFA on the gas phase migration of the alkali metal (K). With the decreasing addition ratio of CFA (Mr = 1.5:1 or 2:1), the spherical and filamentous crystals were increased in the slag. MgO, Fe2O3, and Al2O3 may be involved in the formation of high-temperature refractory Mg-Fe-aluminate, Ca- and Mg-silicate, which were the precursors of the rigid slag. The alkali metals mostly presented in the form of K2O and KCl in the gas-solid conversion under the temperature effect, serving as binders for bridging, agglomeration, and slagging of the above precursors. In addition, the kalium enrichment was accompanied by Al and S in the CFA, indicating that the Al- and S-active sites have obvious adsorption to kalium.

The Carbon Environment Effects on Phase Composition and Photoluminescence Properties of Β-Sialon Multiphase Materials Prepared from Fly Ash Acid Slag

Understanding the Role of Calcium Silicate Slag in Sodium Carbonate-Activated Green Materials: Influence on Kinetics, Strength, and Efflorescence

Carbothermal Reduction Nitridation of Fly Ash, Diatomite and Raw Illite: Formation of Nitride Powders with Different Morphology and Photoluminescence Properties

Structure, morphology and mechanism research on synthesizing xonotlite fiber from acid-extracting residues of coal fly ash and carbide slag

Effects of Sodium Carbonate and Sodium Chloride Additives on Alkaline Fusion of Coal Fly Ash

Dilithium Dialuminium Trisilicate Crystalline Phase Prepared from Coal Fly Ash

Phases transformation of high-alumina fly ash under carbothermal reduction and nitridation

Effect of Starting Composition and Post-Anneal on the Structure and Luminescence Properties of Eu-doped Ca-α-SiAlON Phosphors Prepared by Combustion Synthesis

Luminescent Properties and Microstructure of SiC Doped AlON: Eu2+ Phosphors

Effect of Comburent Ratios on Combustion Synthesis of Eu-doped Β-Sialon Green Phosphors

Effect of the Coal Fly Ash Blending Ratio on Biomass Slagging Structure Modification and Alkali Metal Migration

Preparation, Microstructure, and Mechanical Properties of Spinel-Corundum-Sialon Composite Materials from Waste Fly Ash and Aluminum Dross

Elimination of residual carbon in carbothermal-synthesized SrAlSi 4 N 7:Eu 2+phosphors via non -thermal plasma oxidation

Preparation of Β-Sialon from Fly Ash by Carbothermal Reduction-Nitridation Reaction

Synthesis of β-SiAlON materials from blast furnace slag by acetic acid leaching combined with carbothermal reduction and nitridation

Impact of Si/Al Ratio in Comburents on the Combustion Synthesis of Eu2+-doped Α-Sialon Yellow Phosphors

Quantitative phase analysis of the calcium silicate slag as the residue of extracting alumina from high-alumina fly ash

Phase transformation of high aluminium fly ash in carbothermal reduction–nitridation at high temperatures

Combustion Synthesis of Eu2+Doped Β-Sialon Phosphors by Salt Assistance

Synthesis of Sialon-Mullite Composites Using Fly Ash by Carbon-Thermal Reduction Nitridation

Preparation of SrAl2O4:Dy,Eu phosphor by sol-gel processing and its luminescent properties