Proton Donor-Regulated Mechanically Robust Aramid Nanofiber Aerogel Membranes for High-Temperature Thermal Insulation
Yinghe Hu,Guang Yang,Jintao Zhou,Heyi Li,Lei Shi,Xianlin Xu,Bowen Cheng,Xupin Zhuang
DOI: https://doi.org/10.1021/acsnano.1c11301
IF: 17.1
2022-03-16
ACS Nano
Abstract:High-performance thermal insulators are urgently desired for energy-saving and thermal protection applications. However, the creation of such materials with synchronously ultralow thermal conductivity, lightweight, and mechanically robust properties still faces enormous challenges. Herein, a proton donor-regulated assembly strategy is presented to construct asymmetric aramid nanofiber (ANF) aerogel membranes with a dense skin layer and a high-porous nanofibrous body part. The asymmetric structure originates from the otherness of the structural restoration of deprotonated ANFs and the resulting ANF assembly due to the diversity of available proton concentrations. Befitting from the synergistic effect of the distinct architectures, the resulting aerogel membranes exhibit excellent overall performance in terms of a low thermal conductivity of 0.031 W·m–1·K–1, a low density of 19.2 mg·cm–3, a high porosity of 99.53%, a high tensile strength of 11.8 MPa (16.5 times enhanced), high heat resistance (>500 °C), and high flame retardancy. Furthermore, a blade-scraping process is further proposed to fabricate the aerogel membrane in a continuous and scalable manner, as it is believed to have potential applications in civil and military fields.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsnano.1c11301.Figures of morphology and deprotonation process of Kevlar fiber, AFM images of ASAAM skin layer and body part, digital photos of HAAM breaking after slight deformation, in situ FTIR spectra of ANF reprotonation processes induced by DI water and formic acid, time for full color change during the sol–gel transition processes of ANFs under different proton donors, SEM images of the skin layer and body part of ASAAM prepared by different proton donors, digital photos of homemade blade-scraping device for continuous aerogel membrane, cross-sectional SEM images of aerogel membranes prepared by different CANF values, different types of proton acids, and different CHCOOH values, SEM images of ANF15-F50, ANF20-F50, and ANF25-F50 body part, table of performance comparison between ASAAMs and ANF aerogels reported in literatures, and infrared thermal image of ANF20-F50 with the skin at the bottom (PDF)Video S1: Comparison of HCOOH and DI water on the reprotonation rate of ANFs and the wet membrane performance (MP4)Video S2: Comparison of the burning phenomenon of ANF20-W and ANF20-F50 (MP4)This article has not yet been cited by other publications.
materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology