Abstract:Waterproof and breathable membranes (WBMs) are highly demanded worldwide due to their promising applications in outdoor protective clothing, medical hygiene, and electronic devices. However, the design of such materials integrated with environmental friendliness and high functionality has been considered a long-standing challenge. Herein, we report the green-solvent-processed polyamide fibrous membranes with amphiphobicity and bonding structure via ethanol-based electrospinning and water-based impregnating techniques, endowing the fibrous membranes with outstanding water/oil/dust-resistant and good breathable properties. The developed green smart fibrous membranes exhibit integrated properties with robust water and oil intrusion pressures of 101.2 and 32.4 kPa, respectively, excellent dust removal efficiency of above 99.9%, good water vapor transmission rate of 11.2 kg m–2 d–1, air permeability of 2.6 mm s–1, tensile strength of 15.6 MPa, and strong toughness of 22.8 MJ m–3, enabling the membranes to protect human beings and electronic devices effectively. This work may shed light on designing the next generation green smart fibrous WBMs for protective textiles.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c20172?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c20172</a>.Photographs showing the electrospinning machine and five plastic syringes loaded on the filling pump (Figure S1); viscosity of spinning solutions and average diameter of the obtained fibers with various EPA concentrations (Figure S2); starting region of tensile stress–strain curves of the EPA membranes with various polymer concentrations (Figure S3); SEM images of the TEPA fibrous membranes fabricated from various WFPA concentrations (Figure S4); surface tension of water and oil (Figure S5); impact of liquid jets on the surface of the EPA-2 and TEPA-3 fibrous membranes (Figure S6); mean pore size of TEPA membranes with various WFPA concentrations (Figure S7); tensile stress–strain curves of the TEPA membranes with various WFPA concentrations (Figure S8); and XPS data of TEPA membranes fabricated from various WFPA concentrations (Table S1) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c20172/suppl_file/am0c20172_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

In situ enhancing thermal and mechanical properties of novel green WPAI nanocomposite membrane via artificially cultivated biomass-based diatom frustules

Fabrication of Ph-Sensitive Superhydrophilic/Underwater Superoleophobic Poly(vinylidene Fluoride)-Graft-(sio2 Nanoparticles and PAMAM Dendrimers) Membranes for Oil-Water Separation.

High Strength, Thermostable and Fast-Drying Hybrid Transparent Membranes with POSS Nanoparticles Aligned on Aramid Nanofibers

Combing Three-Dimensional Water Channels and Ultra-Thin Skin Layer Enable High Flux and Stability of Loose Polyimide/sio2 Nanofiltration Membranes at Low Operating Pressure Via One Step In-Situ Modification

In-situ Interfacial Polymerization of Polyamide TFN Membranes by Adding a Diamino-Silane Coupling Agent: Toward Enhanced Desalination Performance

Self-healing and Superwettable Nanofibrous Membrane with Excellent Stability towards Multifunctional Applications in Water Purification.

Green-Solvent-Processed Fibrous Membranes with Water/Oil/Dust-Resistant and Breathable Performances for Protective Textiles

Characterization and Preparation of Poly(vinylidene Fluoride) (PVDF) Microporous Membranes with Interconnected Bicontinuous Structures Via Non-Solvent Induced Phase Separation (NIPS)

Enhancement of compatibility between covalent organic framework and polyamide membrane via an interfacial bridging method: Toward highly efficient water purification

Fiber Templated Epitaxially Grown Composite Membranes: From Thermal Insulation to Infrared Stealth

Thermal-induced surface densification of polyimide asymmetrical membranes for efficient organic solvent nanofiltration

Breaking the Trade-off between Selectivity and Permeability of nanocomposite membrane modified by UIO66@PDA through nonsolvent thermally induced phase separation method

Direct electrospinning of fluorine-free waterproof polyamide/polydimethylsiloxane nanofibrous membranes with highly breathable performance

Fabrication and Performance of Novel Poly(piperazine-amide) Composite Nanofiltration Membranes Based on Various Poly(m-phenylene Isophthalamide) Substrates

Green Fabrication of Polyamide Nanofiltration Membranes with Ultra-Low Chemical Consumption by Vacuum Filtration-Spraying Assisted Interfacial Polymerization

Improving mechanical and thermal properties of short carbon fiber/polyamide 6 composites through a polydopamine/nano‐silica interface layer

Biomimetic Silicification on Membrane Surface for Highly Efficient Treatments of Both Oil-in-Water Emulsion and Protein Wastewater.

Polydopamine/ polyethyleneimine/ MOF ternary-coated poly (vinyl chloride) nanocomposite membranes based on green solvent for shale gas wastewater treatment

Incorporation of dendritic silica nanoparticles for the preparation of high‐performance thin‐film nanocomposite membranes

Thermally Stable Thin-Film Composite Nanofiltration Membranes Derived from 3,3′-Diaminobenzidine

Fabrication of a novel composite nanofiltration membrane with effective treating dye wastewater via integration of phase inversion and interfacial polymerization