Improved Electrical Transport Properties of Polycrystalline La0.8(Ca0.12Sr0.08)MnO3 Ceramics by Ag2O Doping.

Gang Dong,Tao Sun,Fuquan Ji,Yang Liu,Shuai Zhang,Zhiheng Yang,Xiaohan Yu,Yunbiao Duan,Zhidong Li,Xiang Liu

DOI: https://doi.org/10.1039/c8ra08463g

IF: 4.036

2019-01-01

RSC Advances

Abstract:Polycrystalline La0.8(Ca0.12Sr0.08)MnO3:mol%Agx (LCSMO:Agx, x = 0, 0.1, 0.2, 0.3 and 0.4) ceramics were synthesized by the sol–gel technique.

What problem does this paper attempt to address?

Improvement of Electromagnetic Properties at Room Temperature in La0.625Ca0.375-Sr MnO3:Ag0.2 (x = 0.09–0.15) Ceramics by Sr Doping

Yang Liu,Tao Sun,Gang Dong,Shuai Zhang,Qingming Chen,Xiang Liu

DOI: https://doi.org/10.1016/j.ceramint.2019.05.049

IF: 5.532

2019-01-01

Ceramics International

Abstract:In this study, facile sol-gel method was used to prepare La0.625Ca0.375-xSrxMnO3:Ag-0.2 (LCSMO:Ag-0.2, x = 0.09-0.15) polycrystalline ceramics. X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM) indicated an increase in grain size of LCSMO:Ag(0.)2 ceramics with orthorhombic structure as a function of x. Four-probe resistivity temperature system was employed to characterize electrical and magnetic properties of all prepared specimens. Temperature coefficient of resistivity (TCR) and magnetoresistance (MR) yielded room temperature maxima of 4.9% K-1 at 299.2 K and 17.5% at 299.1 K. The enhancement in TCR and MR was mainly attributed to Jahn-Teller (JT) distortion and double exchange (DE) effect. X-ray photoemission spectroscopy (XPS) and inductively coupled plasma-optical emission spectrometer (ICP-OES) all confirmed the existence of silver in metallic forms and the increase of Sr content. On the other hand, satellite peaks in low temperature range of resistivity-temperature (rho-T) curves gradually weakened as Sr-doped amount increased. The fitting of rho-T curves in low-temperature region revealed that gradual vanishing of satellite peak may be due to presence of Sr, able of inhibiting various types of interactions: electron-electron, electron-phonon, and Kondolike spin-dependent scattering. Overall, room temperature TCR and MR were both optimized by Sr doping, providing further understanding of CMR mechanism and application of manganite materials in electromagnetic equipment under room temperature.
Polycrystalline La0.845Sr0.155MnO3:Ag ceramics (0 ≤ x ≤ 0.5) with room-temperature TCR and MR for improved uncooling photoelectric and magnetic devices

Gang Dong,Tao Sun,Fuquan Ji,Yang Liu,Shuai Zhang,Hui Zhang,Xiang Liu

DOI: https://doi.org/10.1016/j.ceramint.2019.03.120

IF: 5.532

2019-01-01

Ceramics International

Abstract:The structural, electrical and magnetic properties of polycrystalline La0.845Sr0.155MnO3:mol%Ag-x (LSMO:Ag-x, 0 <= x <= 0.5) ceramics fabricated by the sol-gel process were systematically investigated. The Rietveld refinements of X-ray diffraction (XRD) patterns confirmed that LSMO:Ag-x were crystallized in rhombohedral texture belonging to R (3) over barc space group. As Ag addition rose, grain sizes of LSMO:Ag-x specimens increased and grain boundaries (GBs) amount decreased accordingly. The optimal values of magnetoresistance (MR) and temperature coefficient of resistivity (TCR) of LSMO:Ag-x specimens significantly enhanced as Ag content changed. For LSMO:Ag-x (x = 0.2), the maximum values of TCR and MR reached 17.54% K-1 (peak TCR temperature T-k = 300.04 K) and 34.58% (peak MR temperature T-m = 303.83 K), shifting temperature to room value (300 K). The optimization of the electrical/magnetic performance of the LSMO:Ag-x samples were ascribed to the Ag doping, which improved the GBs connectivity in LSMO:Ag-x Overall, these results indicated the promise of LSMO:Ag-x ceramics for broad use to uncooling infrared bolometers or magnetic sensors.
La0.67(Ca0.24Sr0.09)MnO3:xAg2O (0 ≤ X ≤ 0.25) Composites with Improved Room–temperature TCR and MR for Advanced Uncooling Infrared Bolometers and Magnetic Sensors

Tao Sun,Yang Liu,Gang Dong,Shuai Zhang,Zhidong Li,Kaili Chu,Xingrui Pu,Hongjiang Li,Fuquan Ji,Hui Zhang,Qingming Chen,Xiang Liu

DOI: https://doi.org/10.1016/j.apsusc.2019.07.056

IF: 6.7

2019-01-01

Applied Surface Science

Abstract:In this research, high-density La-0.67(Ca0.24Sr0.09)MnO3:xAg(2)O (LCSMO: xAg(2)O, x = 0, 0.05, 0.1. 0.15, 0.2, and 0.25) composites were successfully fabricated through the conventional sol-gel method. Scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and XRD data confirmed presence of silver at A sites (La3+/Ca2+/Sr2+) as Ag+ and segregates at grain boundaries (GBs) to form metallic silver. The electrical properties greatly improved by adding Ag2O. Significant enhancements in peak temperature coefficient of resistivity (TCR) and magnetoresistance (MR) at room-temperature (300 K) were observed for LCSMO:xAg(2)O composites. The peak TCR increased from 3.7% K-1 (299.3 K, for x = 0) to 14.8% K-1 (301.0 K, for x = 0.2), and MR rose from 16.9% (303.0 K, for x = 0) to 34.1% (300.6 K, for x = 0.2). These improvements in peak TCR were attributed to increased grain size and formation of metallic silver at GBs or within the composites. Moreover, peak MR was higher in Ag2O doped composites, which was mainly due to large spin polarization effect and strong coupling ferromagnetic domains under external magnetic field. Overall, the large room-temperature TCR and MR values of LCSMO:0.2Ag(2)O composites look promising for future advanced uncooling infrared bolometers and magnetic sensors.
Bivalent Sr2+ doping to improve room-temperature TCR of La0.8-Sr Ag0.2MnO3 polycrystalline ceramics

Kaili Chu,Hongjiang Li,XingRui Pu,Xiaoli Guan,Xiaohan Yu,Shuaizhao Jin,Jubo Peng,Zhidong Li,Hui Zhang,Qingming Chen,Xiang Liu

DOI: https://doi.org/10.1016/j.jallcom.2022.163691

IF: 6.2

2022-05-01

Journal of Alloys and Compounds

Abstract:Rare earth manganites have attractive wide attentions due to their promising applications in infrared bolometers and magnetic information storage. Their temperature coefficient of resistivity (TCR) need further improved so as to achieve its applications at room temperature. In this work, La0.8-x Sr x Ag0.2MnO3 (LSAMO, x = 0.00, 0.10, 0.15, 0.175, and 0.25) ceramics are fabricated by sol-gel method. Their structure and morphology as well as the optical, electrical and magnetic properties are studied. The structural distortion of Sr doped specimens is identified by the shift of the X-ray diffraction peaks toward the low angles and the red-shift of their Fourier transform infrared spectra. Meanwhile, the Mn4+ ion concentration increases, indicating that the double exchange effect enhances in the ceramics. Furthermore, the TCR values are obviously influenced by the doped Sr content. It enhances from 2.5% K−1 at 211.5 K for La0.8Ag0.2MnO3 to 16.9% K−1 at 299.8 K for La0.625Sr0.175Ag0.2MnO3. The origin of this improvement is attributed to the transformation of rare earth manganites from ferromagnetic metal to paramagnetic insulator and the distortion of MnO6 octahedra. These results uncover the effect of Sr2+ doping on the room-temperature TCR values of ceramics, making it suitable for advanced uncooling device applications.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
HE ELECTICAL-RANSPORT PROPERTIES OF THE MO-DOPING La0.7Ca0.2Ba0.1Mn1-xMoxO3

CAO Yong-zhen,MEI Ye,LIU Bao-qin,LIU Zhen-hua,LIN Xiao,XU Zhu-an,HE Jun-hui

2010-01-01

Abstract:The Mo-doping La0.7Ca0.2Ba0.1Mn1-xMoxO3(x=0,0.01,…,0.06) polycrystalline samples have been prepared by solid state reaction method. The influence of Mo-doping on the structure ,transport properties and magnetoresistance have been investigated. X-ray diffraction indicated that all of the samples have orthorhombic(Pbnm) perovskite structure. The magnetization versus temperature (M～T) curves for zero field-cooled (ZFC)and field-cooled (FC) conditions in a magnetic filed of 100 G suggest that all of the samples undergo a FM to PM phase transition. The cluster-glass state is found to be formed below Tc,meanwhile the transition temperature Tc decreases from Tc~294.2K(x=0.00) to Tc~240.83K (x=0.06) due to increasing Mo doping. The temperature dependence of resistivity ρ(T) curves are measured under H=0T and H=1.5T,which reveals a metal-insulator transition and the transition temperature TP shifts obviously to lower temperature with increasing Mo content. The temperature dependence of magnetoresistance(MR ) curve of the samples indicates that the CMR around Tp is enhanced considerably by Mo-doping. For the sample with x=0.06,MR reaches a maximum value of 45.32%,which is almost three times of the undoped sample for x=0.
Preparation of La_(1-x)Sr_xCoO_(3-δ) Conductive Ceramics by Sol-gel Method

Qilong Zhang

2012-01-01

Abstract:La1-xSrxCoO3-δ conductive ceramics with single-phase perovskite structure and good crystallization were prepared by sol-gel method.The structure and properties of La1-xSrxCoO3-δ ceramics were discussed,and its possibility of application in electrical contact materials was also investigated.Results show that with the doping content of Sr increasing,the diffraction peaks of La1-xSrxCoO3-δ shifts toward the wide-angle slightly,the peak intensity decreases and the FWHM increases.La1-xSrxCoO3-δ(x=0.1~0.7) ceramics prepared by sol-gel method generally have good electrical conductivity.Under 1 000 ℃ heat treatment,the La0.4Sr0.6CoO3-δ sample is partially translated into La0.5Sr0.5CoO2.91 and releases oxygen,accompanied with the products of La2O3,Co3O4 and SrCoLaO4 at the meantime.It is reported that CdO also has these similar thermodynamic behaviors in AgCdO materials.Consequently,La1-xSrxCoO3-δ ceramics have potential applications in the field of electrical contact materials.
High-density sol-gel derived, cold-isostatically pressed La0.67Ca0.27Sr0.06MnO3 polycrystalline ceramics and their room-temperature TCR improvement

Yang Liu,Gang Dong,Shuai Zhang,Xiang Liu

DOI: https://doi.org/10.1016/j.ceramint.2020.11.110

IF: 5.532

2021-03-01

Ceramics International

Abstract:In this study, high-density La0.67Ca0.27Sr0.06MnO3 (LCSMO) ceramics were successfully obtained by sol-gel method followed by cold isostatic pressing (CIP) under 250 MPa. Effects of sintering temperature (T S, 1250 °C ≤ T S ≤ 1450 °C) on structure, surface chemical, electrical, and optical properties of as-obtained LCSMO ceramics were investigated by X-ray diffraction (XRD, BDX3200), X-ray photoemission spectroscopy (XPS, Thermo Fisher Scientific), a four-probe system (East changing ET9005), Fourier transform infrared spectrometry (FTIR, TENSOR 27), Raman microscopy (RENISHAW inVia) and UV–vis spectrophotometry (HITACHI U-4100), respectively. All prepared samples showed orthorhombic structure with Pnma space group. As T S increased, grain size gradually rose from 2.71 to 7.30 μm. XRD refinement, Raman, and FTIR all depicted constant of bond angle and length of Mn–O. Hence, variation in T S did not cause lattice distortion inside samples. The best electrical properties were obtained at 1450 °C, where resistivity (ρ) fell below 0.008 Ω cm and temperature coefficient of resistivity (TCR) reached 13.0% K−1 at 289.2 K (room temperature).It is worth noting that electrical performance was indeed improved due to high densities of samples under processing of CIP. Overall, the change in T S from 1250 to 1450 °C greatly influenced electrical behaviors but showed little effect on structural and optical properties of LCSMO ceramics.

materials science, ceramics
Structural, Electrical, and Magnetic Transport Properties of La0.72Ca0.28Mn1−xCrxO3 (0 ≤ X ≤ 0.06) Ceramics

Yan Gao,Ji Ma,Qingming Chen,Hui Zhang,Lingde Kong,Kun Dong,Wenhong Zhong,Sheng'an Yang

DOI: https://doi.org/10.1016/j.ceramint.2022.04.011

2021-01-01

SSRN Electronic Journal

Abstract:To obtain comprehensive materials with both high temperature coefficient of resistivity (TCR) and magnetoresistance (MR) at low magnetic fields, polycrystalline La0.72Ca0.28Mn1_xCrxO3 (x = 0, 0.02, 0.04, 0.06) ceramics were prepared herein by sol-gel method. Electronic configuration of Cr3+ ions is similar to that of Mn4+ ions, therefore, successive substitution of Mn with Cr increases electrical resistivity and decreases metal-insulator transition temperature of ceramics, even yielding hump-like feature for Cr-rich (x = 0.06) samples. The best TCR (28.50%.K_1) and MR (72.37%) values were obtained simultaneously at Cr dopant content of 0.02 (La0.72Ca0.28Mn1_xCrxO3). Strong response of the material to temperature and magnetic field was caused by minimal symmetry of orthorhombic structure and the most robust Jahn-Teller distortion. With increasing Cr content, Mn3+/Mn4+ or Mn3+/Cr3+ double exchange was diluted, and Cr3+/Cr3+ or Cr3+/Mn4+ superexchange was promoted. However, the internal competition effect was not conducive to the improvement of material properties.
Study of the Effects of A-Site La-Substition on the Electrical and Magnetic Properties of Dy0.5Sr0.5MnO3 Ceramics

Yang Li,Lei Shi,Jiyin Zhao,Shiming Zhou,Dan Yao,Changzheng Xie

DOI: https://doi.org/10.1002/pssb.201700155

2017-01-01

Abstract:The Dy0.5-xLaxSr0.5MnO3 (0x0.4) manganite compounds have been synthesized by solid state reaction, and the effect of nonmagnetic La ion doping on the crystal structure, electrical and magnetic properties are systematically investigated. It is found that with successive substitution of La element, A-site cationic arrangement transforms from disorder (random, x0.25) to order structure (x>0.25), and the crystal structure undergoes a transition from cubic to orthogonal distorted perovskite structure. When 0x<0.25, the compounds show a similar semiconducting behavior and magnetic property with a low-temperature spin-glass state. When x=0.25, however, long-range ferromagnetic (FM) order begins to form and coexists with anti-ferromagnetic (AFM) phase in the compound. When x further increases, FM interactions strengthen and become predominant in the magnetic properties of the compound. On the other hand, in contrast to the semiconducting behavior of the compounds with x0.25, when x>0.25, the resistivity decreases quickly in the corresponding temperature range. It is suggested that not only the A-site cationic disorder turning, closely related to the cation radius distribution (mismatch), sigma(2), controlled by A-site cation radius r(A), but the substitution of nonmagnetic La ions, or A-site magnetic change, is an effective way to adjust the crystal structure and the related magnetic and electrical properties of the perovskite manganite oxides for the applications.
The effect of doping Ag on the microstructure of La 2/3 Sr 1/3 MnO 3 films

Q. Zhan,R. Yu,L. L. He,D. X. Li,J. Li,C. K. Ong

DOI: https://doi.org/10.1557/JMR.2002.0392

IF: 2.7

2002-01-01

Journal of Materials Research

Abstract:The microstructure of Ag-doped La 2/3 Sr 1/3 MnO 3 (LSMO) thin films deposited on (001) LaAlO 3 single-crystal substrates was systematically investigated in cross section and plan view by high-resolution electron microscopy and analytical electron microscopy. The results showed that the films deposited at 750 °C were perfectly epitaxial with or without Ag-doping. No Ag in the doped film was detected. On the other hand, the LSMO films deposited at 400 °C were less perfect. With increasing Ag-doping level, the shape of LSMO grains became irregular, and the grain size increased gradually. Large polycrystalline clusters consisting of LSMO, AgO, and Ag grains formed in the doped films, and the amount and size of them increased with increasing Ag-doping level. Ag existed at the LSMO grain boundaries in its elemental state. A growth process for the LSMO-Ag system is discussed based on the experimental results. The enhancement of the magnetic spin disorders at the grain boundaries and interfaces caused by doping Ag could result in an improvement of low-field magnetoresistance.
Improved Electrical Transport Properties of La0.7Ca0.3−K MnO3 (0.0 ≤ X ≤ 0.3) Films Grown on La0.3Sr0.7Al0.65Ta0.35O3 (00l) Substrates by Sol–gel Spin Coating Method

Zimeng Pan,Zihao Chen,Zhenyu Wang,Xiaokun Zhu,Jiamei Han,Jiabin Jiang,Yao Wang,Xiaolu Liang,Haitao Wang,Yiliang Liu,Yufei Du,Jiachen Wang,Xiang Liu,Xin Gu

DOI: https://doi.org/10.1016/j.ceramint.2024.04.435

IF: 5.532

2024-01-01

Ceramics International

Abstract:Herein, La0.7Ca0.3−xKxMnO3 (LCKMO) films with highly oriented growth were prepared on La0.3Sr0.7Al0.65Ta0.35O3 (00l) substrates by sol–gel spin coating method. Comprehensive analysis of microstructure, surface morphology, ion valence, and electrical transport properties of LCKMO films indicates that the substitution of K+ ions for Ca2+ ions increased the ratio of Mn4+/(Mn3+ + Mn4+), narrowed single electron bandwidth, and enhanced double exchange mechanism and electron–lattice coupling. Moreover, the doping of K+ ions induced the dense and uniform conical-structured growth of grains on the surface of the films. Results demonstrated that at x = 0.1, LCKMO film exhibited the maximum TCR of 17.84% K−1 at 253.07 K, which was 31.76% higher than that of previously reported La1−x−yCaxKyMnO3 ceramic with the highest TCR. Further theoretical insights into the effects of Ca/K co-doping on electrical transport properties were supplemented.
Improvement in electronic and magnetic transport of La0.67Ca0.33MnO3 manganites by optimizing sintering temperature

Fei Jin,Hui Zhang,Xiaohui Chen,Xiang Liu,Qingming Chen

DOI: https://doi.org/10.1007/s10971-016-4186-x

2016-09-13

Abstract:La0.67Ca0.33MnO3 samples with high temperature coefficient of resistance have been synthesized by sol-gel method using methyl alcohol as solvent. Nitrates of La, Ca and Mn were heated with a controlled amount of methyl alcohol to get a dry powder which on suitable heat treatment gave high grade La0.67Ca0.33MnO3 powder/pellets. The samples were sintered in the temperature varied from 1000 °C to 1550 °C. The effects of sintering temperature (Ts) on phase purity, microstructure, morphology, electrical and magnetic transport properties have been investigated. The results confirm that elevated sintering temperature at sintering processing accelerates the growth of the specimen grains, influence microstructure and improves chemical homogeneity, which leads to the increased lattice distortion and thus contributes to the enhancement of magneto-resistance. The reduction of the grain boundaries contributes to the reduction of resistivity and the enhancement of the coefficient of resistance. The increase of the oxygen vacancy induced by the increase of Ts will lead to monotonous decrease of the metal-insulator transition temperature (Tp), the peak of temperature for the maximum temperature coefficient of resistance (Tk) and for the peak of maximum magneto-resistance (Tm).Graphical Abstract

materials science, ceramics
Exploring the Electrical Transport Properties of La0.67Ca0.33MnO3 at Different Sintering Temperatures

Qi Longfei,Li Yule,Yu Ping,Wang Xiaojin,Li Yingjuan,Gao Yan,Yang Yunrui,Wu Dingzhang,Zhang Hui,Chen Qingming

DOI: https://doi.org/10.1007/s10854-021-05943-1

2021-01-01

Journal of Materials Science Materials in Electronics

Abstract:The La0.67Ca0.33MnO3 polycrystalline ceramics were prepared by the co-precipitation method with ammonium carbonate as the precipitant and the influence of the sintering temperature on the electrical transport properties of the ceramics were investigated. XRD results show that the ceramic structures obtained are all perovskite structures, which belong to the Pnma space group. Scanning electron microscopy (SEM) photographs demonstrated that the average size of the grains with the sinter temperature increased from 5.78 μm at 1300 °C to 24.04 μm at 1475 °C. Meanwhile, when the sintering temperature reached 1450 °C, the TCR reached the maximal value (32.3%·K−1), which was much larger r than the TCR at 1350 °C. The theoretical model analysis of the data leads to the conclusion that the conductive mechanism of the low-temperature metallic region and the high-temperature insulating region is dominated by the grain boundary scattering effect and the small-polariton hopping (SPH), respectively.
A-site mixed-valence co-doping to optimize room-temperature TCR of polycrystalline La0.8K0.04Ca0.16-Sr MnO3 ceramics

Hongjiang Li,Kaili Chu,Xingrui Pu,Shuai Zhang,Gang Dong,Yang Liu,Xiang Liu

DOI: https://doi.org/10.1016/j.ceramint.2020.04.109

IF: 5.532

2020-09-01

Ceramics International

Abstract:Herein, polycrystalline La0.8K0.04Ca0.16-x Sr x MnO3 ceramics (A-site = La, K, Ca and Sr, 0.00 ≤ x ≤ 0.16) are successfully synthesized via the sol-gel process and the influence of Sr content on microstructural and electrical transport properties is investigated in detail. The results reveal that the replacement of Ca-ions by Sr-ions resulted in a decreased resistivity and enhanced temperature coefficient of resistance (TCR) peak temperature (T k). The influence of A-site mixed-valence co-doping, where A-site is occupied by monovalent alkali-metal, divalent alkaline-earth element and trivalent rare-earth element, on electrical transport properties can be explained by using different conduction mechanisms in different temperature regions. At optimal doping content of 0.12, peak TCR of the resistivity was found to be 12.04% K−1 at 290.38 K, which is the best reported TCR for A-site mixed-valence co-doped perovskite manganese oxides. These results confirm that high room-temperature TCR values can be achieved by optimizing A-site mixed-valence co-doping and demonstrate the potential of polycrystalline La0.8K0.04Ca0.04Sr0.12MnO3 ceramic in uncooling infrared bolometers.

materials science, ceramics
Structural, Magnetic, and Transport Properties in La0.7Ca0.3Mn1−xScxO3

YH Huang,CH Yan,L Zhang,ZM Wang,S Gao,CS Liao,GX Xu

DOI: https://doi.org/10.1063/1.1405833

IF: 2.877

2001-01-01

Journal of Applied Physics

Abstract:Structural, magnetic, and transport properties of polycrystalline La0.7Ca0.3Mn1−xScxO3 have been experimentally investigated. Single-phase samples are obtained in the range 0⩽x⩽0.25 by the soft chemical synthesis route. The substitution of Sc3+ at the Mn site results in reductions in the Curie temperature Tc and in the magnetic moment per Mn ion. The Tc transition temperature becomes broader with x, and the magnetic spontaneous state has changed into a cluster glass state for the sample of x=0.1. In addition, great enhancement in resistance and magnetoresistance effect is observed in the Sc-doped samples. In our case the notable doping effects can be mainly ascribed to the variation in the Mn3+–O2−–Mn4+ network and to the magnetic disorder caused by the presence of the large and nonmagnetic Sc3+ ions in the Mn sublattice.
Improvement in the Sintering and Electrical Properties of Strontium- and Magnesium-Doped Lanthanum Gallate by MoO3 Dopant

Yuan Wang,De Feng Zhou,Lei Chen,Shen Kun Xie,Xiao Juan Liu,Jian Meng

DOI: https://doi.org/10.1016/j.jallcom.2017.03.323

IF: 6.2

2017-01-01

Journal of Alloys and Compounds

Abstract:The LSGM powders by doping 0-2.5 at.% of MoO3 were synthesized and investigated. The microstructure and electrical properties of the samples were characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM) and electrochemical impedance spectroscopy (EIS) respectively. The results showed that the phase purity, densification and conductivity of the LSGM samples could be improved by a proper addition of MoO3. The LSGM specimen by doping 2 at.% MoO3 exhibited the best phase purity, the best density, the largest grain size and the lowest activation energy. Moreover, it was found that the conductivity of the LSGM by doping 2 at.% MoO3 was 3.91 x 10(-4) S cm(-1) at 450 degrees C, which was 2.82 times as high as LSGM without MoO3 doping. Moreover, the thermal expansion coefficient of the LSGM-2Mo sample changed little by MoO3 doping. Therefore, the MoO3 doped LSGM may be a potential electrolyte material for anode-supported solid oxide fuel cells (SOFCs) without requiring buffer layer between anode and electrolyte. (C) 2017 Elsevier B.V. All rights reserved.
La 0.7 Ca 0.3- x Na x MnO 3 polycrystalline with high magnetoresistance and temperature coefficient of resistance were prepared via the sol–gel method

Yan Gao,Ling Li,Yule Li,Sheng’an Yang,Ji Ma,Yingjuan Li,Longfei Qi,Yunrui Yang,Dingzhang Wu,Hui Zhang,Qingming Chen

DOI: https://doi.org/10.1007/s10854-021-06385-5

2021-01-01

Abstract:Doping is a primary method to improve the temperature coefficient of resistance ( TCR ) and magnetoresistance ( MR ) of La 1- x A′ x MnO 3 polycrystalline in a low magnetic field. La 0.7 Ca 0.3- x Na x MnO 3 ( x = 0, 0.02, 0.04, 0.06, 0.08) series of polycrystalline were synthesized by the sol–gel method. X-ray diffraction patterns indicate that the crystal structure changes from orthorhombic to rhombohedral, and the space group changes from Pnma to R-3c with increasing x . With Na-doping rise, the increase in grain size reduces grain boundaries, weakening the electron scattering at grain boundaries and decreasing the peak resistivity. The excellent MR (59.51
The Influence of Mn Doping on the Dielectric Properties of Ba0.5Sr0.5TiO3 Ceramics

Li Ping Zhao,Wen Hong Tao,Xing Hua Fu,Wen Zhe Cao,Guo Yuan Cheng,Wen Xin Ma

DOI: https://doi.org/10.4028/www.scientific.net/msf.859.18

2016-01-01

Materials Science Forum

Abstract:(Ba0.5Sr0.5)1-xMnxTiO3(x=0,0.01,0.03,0.05)ceramics were prepared via a new sol-gel method with titannium oxide, strontium nitrate, barium nitrate and manganous nitrate as raw materials.The effect of Mn doping on the microstructure and dielectric properties of the BST were characterized by field scanning electron microscopy,x-ray diffraction and impedance analyser.It was found that the dopted ions could not alter the basic crystal strcuture and they only improved the material properties as modified ions when x≤0.3.The (Ba0.5Sr0.5)1-xMnxTiO3 ceramics sintered at 1250°C for 2h exhibited good dielectric properties(er=1330,tand=0.03)at room temperature and f=1KHz when x=0.03 and the grains were regular and uniform ,indicating a dense microstrcture.
Refined Sr ion ratio to improve room-temperature TCR of La1-xSrxMnO3 (0.175 ≤ x ≤ 0.235) polycrystalline ceramics

Liu, Xiang,Gu, Xin

DOI: https://doi.org/10.1007/s10854-024-13522-3

2024-09-21

Journal of Materials Science Materials in Electronics

Abstract:Perovskite manganite oxides have attracted considerable attention due to their strong electronic correlation. However, their practical application is challenged by high manufacturing costs and inferior electrical properties. In this study, the sol–gel method was employed to precisely control the Sr content in La 1− x Sr x MnO 3 (LSMO, x = 0.175, 0.195, 0.215, and 0.235) polycrystalline ceramics, the relationship between doping levels and electrical transport properties was systematically investigated. The results show that substituting La 3+ with Sr 2+ can effectively tune the electrical transport properties of LSMO ceramics. X-ray diffraction analysis indicates that all samples exhibit a single-phase perovskite structure with no secondary phases detected. Scanning electron microscopy images reveal that the sample surfaces have good grain connectivity, with grain size increasing as the Sr doping level increases. The resistivity–temperature curves of the samples were measured using the standard four-probe method, and significant differences of electrical transport properties were observed within the range of Sr doping studied. Notably, when the Sr doping level is x = 0.195, the temperature coefficient of resistivity ( TCR ) value of LSMO ceramics increases significantly to 10.3% K −1 at the peak TCR temperature ( T k ) of 296.3 K. In summary, these results offer a theoretical basis and guidance for future development of highly sensitive uncooled infrared bolometers.

engineering, electrical & electronic,materials science, multidisciplinary,physics, condensed matter, applied
Preparation and Application of La1-xSrxCoO3-delta Conductive Ceramics

He Qing,Chen Lawson,Shen Qianhong,Zhang Lingjie,Wu Xinhe,Mu Chengfa,Fan Xianping,Yang Hui

2013-01-01

Rare Metal Materials and Engineering

Abstract:La1-xSrxCoO3-delta conductive ceramic powders with different strontium content (x=0.1 similar to 0.7) were synthesized with a solid state method and a sol-gel method. Both the structure and properties of the LSCO samples were investigated, and a new Ag/LSCO material was designed during the exploration of its applications in the environmentally friendly electrical contact materials. Compared with LSCO particles prepared by the solid state method, samples prepared by the sol-gel method are spherical and with smaller particle size (approximately 50 nm), and they generally also have good electrical conductivity (10(3) S.cm(-1)). More importantly, LSCO particles prepared by the sol-gel method can partially be decomposed in the temperature range of 700 similar to 950 degrees C, while giving off O-2. The emitted oxygen can help to prevent welding and blow out the arc when it occurs in the working process of electrical contact materials, effectively reducing the destruction of the arc on the Ag matrix. The similar thermodynamic behaviors occur in CdO qualified Ag/CdO as one of the best electrical contact material, but they can not be found in the samples prepared by the solid state method. Consequently, LSCO powders prepared by the sol-gel method are more worthy of being chosen as reinforcements in the designing of silver based eco-friendly electrical contact materials.

Improved Electrical Transport Properties of Polycrystalline La0.8(Ca0.12Sr0.08)MnO3 Ceramics by Ag2O Doping.

Improvement of Electromagnetic Properties at Room Temperature in La0.625Ca0.375-Sr MnO3:Ag0.2 (x = 0.09–0.15) Ceramics by Sr Doping

Polycrystalline La0.845Sr0.155MnO3:Ag ceramics (0 ≤ x ≤ 0.5) with room-temperature TCR and MR for improved uncooling photoelectric and magnetic devices

La0.67(Ca0.24Sr0.09)MnO3:xAg2O (0 ≤ X ≤ 0.25) Composites with Improved Room–temperature TCR and MR for Advanced Uncooling Infrared Bolometers and Magnetic Sensors

Bivalent Sr2+ doping to improve room-temperature TCR of La0.8-Sr Ag0.2MnO3 polycrystalline ceramics

HE ELECTICAL-RANSPORT PROPERTIES OF THE MO-DOPING La0.7Ca0.2Ba0.1Mn1-xMoxO3

Preparation of La_(1-x)Sr_xCoO_(3-δ) Conductive Ceramics by Sol-gel Method

High-density sol-gel derived, cold-isostatically pressed La0.67Ca0.27Sr0.06MnO3 polycrystalline ceramics and their room-temperature TCR improvement

Structural, Electrical, and Magnetic Transport Properties of La0.72Ca0.28Mn1−xCrxO3 (0 ≤ X ≤ 0.06) Ceramics

Study of the Effects of A-Site La-Substition on the Electrical and Magnetic Properties of Dy0.5Sr0.5MnO3 Ceramics

The effect of doping Ag on the microstructure of La 2/3 Sr 1/3 MnO 3 films

Improved Electrical Transport Properties of La0.7Ca0.3−K MnO3 (0.0 ≤ X ≤ 0.3) Films Grown on La0.3Sr0.7Al0.65Ta0.35O3 (00l) Substrates by Sol–gel Spin Coating Method

Improvement in electronic and magnetic transport of La0.67Ca0.33MnO3 manganites by optimizing sintering temperature

Exploring the Electrical Transport Properties of La0.67Ca0.33MnO3 at Different Sintering Temperatures

A-site mixed-valence co-doping to optimize room-temperature TCR of polycrystalline La0.8K0.04Ca0.16-Sr MnO3 ceramics

Structural, Magnetic, and Transport Properties in La0.7Ca0.3Mn1−xScxO3

Improvement in the Sintering and Electrical Properties of Strontium- and Magnesium-Doped Lanthanum Gallate by MoO3 Dopant

La 0.7 Ca 0.3- x Na x MnO 3 polycrystalline with high magnetoresistance and temperature coefficient of resistance were prepared via the sol–gel method

The Influence of Mn Doping on the Dielectric Properties of Ba0.5Sr0.5TiO3 Ceramics

Refined Sr ion ratio to improve room-temperature TCR of La1-xSrxMnO3 (0.175 ≤ x ≤ 0.235) polycrystalline ceramics

Preparation and Application of La1-xSrxCoO3-delta Conductive Ceramics