Abstract:The effects of austenitizing and austempering temperatures on the bainite transformation kinetics and the microstructural and mechanical properties of a medium-carbon high-silicon ultra-fine bainitic steel were investigated via dilatometric measurements, microstructural characterization and mechanical tests. It is demonstrated that the optimum austenitizing temperature exists for 0.3 wt.%C ultra-fine bainitic steel. Although the finer austenite grain at 950 °C provides more bainite nuclei site and form finer bainitic ferrite plates, the lower dislocation density in plates and the higher volume fraction of the retained austenite reduces the strength and impact toughness of ultra-fine steel. When the austenitizing temperature exceeds 1000 °C, the true thickness of bainitic ferrite plates and the volume fraction of blocky retained austenite in the bainite microstructure increase significantly with the increases in austenitizing temperature, which do harm to the plasticity and impact toughness. The effect of austempering temperature on the transformation behavior and microstructural morphology of ultra-fine bainite is greater than that of austenitizing temperature. The prior martensite, formed when the austempering temperature below Ms, can refine the bainitic ferrite plates and improve the strength and impact toughness. However, the presence of prior martensite divides the untransformed austenite and inhibits the growth of bainite sheaves, thus prolonging the finishing time of bainite transformation. In addition, prior martensite also strengthens the stability of untransformed austenite though carbon partition and enhances the volume fraction of blocky retained austenite, which reduces the plasticity of ultra-fine bainitic steel. According to the experimental results, the optimum austempering process for 0.3 wt. %C ultra-fine bainitic steel is through austenitization at 1000 °C and austempering at 340 °C.

Low-temperature Nanostructured Bainite Transformation: the Effect of Magnetic Field

An integrated exploration from microstructure to mechanics in austenite to pearlite transformation of high carbon steel under high magnetic fields

Inner connection of bainite and pearlite transformation in steels

Effects of high magnetic field on isothermal pearlite transformation and microstructure in a hypereutectoid steel

Effect of high‐temperature deformation on bainite transformation of a low‐carbon bainite steel

New Microstructural Features Occurring During Transformation from Austenite to Ferrite under the Kinetic Influence of Magnetic Field in A Medium Carbon Steel

Effect of Austenitizing Temperature and Prior Martensite on Ultra-Fine Bainite Transformation Kinetics

Three-dimensional morphology and crystallographic characteristics of the low-temperature bainitic microstructure in high-carbon steel

Isothermal bainite transformation in low-alloy steels: Mechanism of transformation

Characteristics and Kinetics of Bainite Transformation Behaviour in a High-Silicon Medium-Carbon Steel above and below the Ms Temperature

Study on Kinetics of Transformation in Medium Carbon Steel Bainite at Different Isothermal Temperatures

Effects of high magnetic field on austenite formation and grain size in a hypereutectoid carbon steel

Bainite Transformation-Kinetics-Microstructure Characterization of Austempered 4140 Steel

Effect of High Magnetic Field on Precipitation Behaviors and Mechanical Properties in Reduced Activation Steels

A thermodynamic study of inverse bainitic transformation

Effect of Mn on the chemical driving force and bainite transformation kinetics in medium-manganese alloys

Low Temperature Tempering of a Medium Carbon Steel in High Magnetic Field

Ultra-Fine Bainite in Medium-Carbon High-Silicon Bainitic Steel

Notably Accelerated Nano-Bainite Transformation via Increasing Undissolved Carbides Content on GCr15Si1Mo Bearing Steel

Effects of ausforming temperature on bainite transformation kinetics, microstructures and mechanical properties in ultra-fine bainitic steel

In situ observation of bainite transformation of low carbon Si-Mn steel