Abstract:The improvement of mechanical properties of high-density polyethylene (HDPE) and polypropylene (PP) blends was studied by controlling the phase compatibility versus phase separation. In the original injection molding processes,super mechanical properties of blend specimens-have not been got easily. Researches have been carried out in injection molding with high shear injection conditions. It has been pointed out that the compatibility of blends will increase under the strong shear in injection processes due to the raise of LCST curve. After the melt is injected into the cold mold, its temperature and compatibility decrease simultaneously, phase separation takes place and becomes frozen in the specimen. High mechanical properties will be got when the phase separation develope to some extent, but it is difficult to control the phase compatibility and separation. The special method of oscillating packing injection molding under low pressure provides a condition to control the phase separation degree. Because the phase morphology and crystal morphology of HDPE/PP blends compete with each other, it is difficult to control the micro-phase separation. In this paper, the fine structure combined with the micro-phase separation and orientation were controlled by using that special injection method and high strength and high toughness blends were obtained. DSC and WAXD results indicate that the improvement of tensile strength is dependent on the number of shish-kebab crystals and the degree of macromolecule orientation caused by the oscillating packing injection molding. SEM results indicate that the impact strength is dependent on the degree of macro- and micro-phase separation. The high tensile strength 97.1MPa and high toughness 45.5kJ/m(2) of HDPE/PP blends were achieved when the PP content in the blends was 8 % and 20 %, respectively. Which are 4.3 times and 9.5 times as high as the corresponding values of their static specimens respectively. The future work will be carried out to investigate the phase morphology and crystal morphology as well as the possibility of cocrystallization of PP and HDPE under oscillating packing injection conditions.

New Insight on Improving Electrical Strength and Toughness of Polyethylene Blends: Turning Point of Supramolecular Structure

Invariant Dielectric Strength Upon Addition of Low Amounts of HDPE to LDPE

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

Morphology evolution and mechanical property enhancement of linear low‐density polyethylene by adding disentangled ultrahigh molecular weight polyethylene

DC Breakdown Modulated by Molecular Chains Movements and Trap Characteristics of HDPE/LDPE Blend Insulation

Thermal, mechanical, and dielectric behaviors of crosslinked linear low density polyethylene/polyolefin elastomers blends

Improved Performance Balance of Polyethylene by Simultaneously Forming Oriented Crystals and Blending Ultrahigh-Molecular-Weight Polyethylene

Dielectric Properties and Mechanical Strength in Low-Density Polyethylene Modified by Metallocene Catalyzed Polyethylene

Unique impact behavior and toughening mechanism of the polypropylene and poly(ethylene-co-octene) alternating multilayered blends with superior toughness

Simultaneously enhancing strength and toughness for impact polypropylene copolymers by regulating the dispersed phase with high density polyethylene

Exploring the Entangled State and Molecular Weight Ofuhmwpeon the Microstructure and Mechanical Properties Ofhdpe/uhmwpeblends

Significant Toughness Improvement in Ipp/plla/egma Blend by Introducing Dicumyl Peroxide As the Morphology Governor

Evolution from micropinned to polymeric alloy structure of XLPE‐PS: Improving electrical properties and mechanism

The High Mechanical Properties and Micro-Phase Separation of High Density Polyethylene and Polypropylene Blends

Realizing Simultaneous Reinforcement and Toughening in Polypropylene Based on Polypropylene/elastomer Via Control of the Crystalline Structure and Dispersed Phase Morphology

Insulation Performance and Microstructure in Modified Polyethylene by MPE

Dielectric Properties and Crystalline Morphology of Low Density Polyethylene Blended with Metallocene Catalyzed Polyethylene

Effect of the Compatibility on Dielectric Performance and Breakdown Strength of Poly(vinylidene Fluoride)/low‐density Polyethylene Blends

Unique crystal morphology and tensile properties of injection-molded bar of LLDPE by adding HDPE with different molecular weights

In Situ Synthesized Self-Reinforced HDPE/UHMWPE Composites with High Content of Less Entangled UHMWPE and High Gradient-Distributed Oriented Structures

Interfacial Microstructure and Withstand Voltage of Polyethylene for Power Cables