Abstract:Space charge effect is undesirable for HV and EHV plastic power cable. Up to now, the insulating materials of most DC power cables are traditional modified polyethylene (PE) in order to have superior dielectric properties such as space charge accumulation, volume resistivity, breakdown strength and so on. The common modification can be achieved by various methods such as the uses of additives, blending, grafting and copolymerization. In general, blending is a widely used technique to improve dielectric properties of PE. Based on blending technique, metallocene catalyzed polyethylene (MPE) is blended into low-density polyethylene (LDPE) in this paper. Then the space charge profile in the blends is measured by pulsed electro-acoustic (PEA) method. And at the same time, the volume resistivity of blends is measured by micro-current detector. In addition, the AC breakdown strength of blends is measured by step voltage. It is shown by test results that LDPE blending with 1% of MPE could effectively decrease the space charge effect, increase the AC breakdown strength by 7.9% and slightly reduce the volume resisitivity. The test results of the resistivity are consistent with that of space charges. It is validated that the blending by proper amount of MPE could decrease the deep traps, increase the shallow traps and the charge mobility in LDPE. Polyethylene is a typical semicrystalline including crystal phase and amorphous phase. The electrical breakdown path advances along the boundaries of spherulites, or trans-crystal, or lamella of LDPE, which means that electrical breakdown path go through amorphous area in polymers. So the increase of AC breakdown strength may be related with the micro-structure and crystalline morphology of LDPE, such as the increase of crystal phase and the decrease of amorphous, or the increase of crystallinity can improve the breakdown strength. At the end of this paper, the relation among material structure, charge trap and dielectric properties in the blends is analyzed and discussed.

Dielectric Properties and Mechanical Strength in Low-Density Polyethylene Modified by Metallocene Catalyzed Polyethylene

Dielectric Properties in Low Density Polyethylene Modified by Metallocene Catalyzed Polyethylene

Dielectric Properties and Crystalline Morphology of Low Density Polyethylene Blended with Metallocene Catalyzed Polyethylene

Insulation Performance and Microstructure in Modified Polyethylene by MPE

Invariant Dielectric Strength Upon Addition of Low Amounts of HDPE to LDPE

Study on Mechanism of Space Charge in Low Density Polyethylene Modified by Metallocene Catalyzed Polyethylene

Space Charge Distribution and Crystalline Structure in Low-Density Polyethylene Modified by Metallocene Catalyzed Polyethylene

Charge Trapping and Transport Properties in Low-Density Polyethylene Modified by Metallocene Catalyzed Polyethylene

DC Breakdown Modulated by Molecular Chains Movements and Trap Characteristics of HDPE/LDPE Blend Insulation

New Insight on Improving Electrical Strength and Toughness of Polyethylene Blends: Turning Point of Supramolecular Structure

The enhanced physical properties of XLPE insulation for high voltage cable based on LDPE/LLDPE or LDPE/HDPE blends

Interfacial Microstructure and Withstand Voltage of Polyethylene for Power Cables

Dielectric Behaviors Of Recyclable Thermo-Plastic Polyolefin Blends For Extruded Cables

Effects of Space Charges on DC Breakdown in Low Density Polyethylene

DC Electrical Breakdown of Low-density Polyethylene Nanodielectrics Modulated by Charge Transport and Molecular Displacement

The Dielectric Properties Improvement of Cable Insulation Layer by Different Morphology Nanoparticles Doping into LDPE

Temperature Dependence of Mechanical, Electrical Properties and Crystal Structure of Polyethylene Blends for Cable Insulation

Mechanical and DC electrical properties of low crosslinking degree LLDPE for XLPE insulation

Dielectric properties of polypropylene blended with copolymers of varying ethylene contents

Temperature Stability of DC Conductivity and Breakdown of Crosslinked LLDPE