Abstract:S-band fiber lasers, one type of ytterbium doped fiber lasers(YDFLs) which emitting in the spectral region of 1010 nm similar to 1050 nm, have drawn more and more attention especially after the proposition of tandem pump fiber lasers. The S-band laser plays an important role as the pump in a tandem pumping scheme. However, high power S-band laser output is quite difficult because of severe re-absorption. Therefore, the optical properties of S-band fiber lasers are studied and methods to achieve high power S-band laser output are presented. An S-band laser emission model based on gain comparison is built for analyzing the mechanism of laser oscillation and amplification. The model is composed of rate equations and gain comparison of several wavelengths in ASE spectrum. The gain differential between laser wavelength and ASE peak wavelength is compared to the additional gain imposed by cavity mirrors in an oscillator or the seed in an amplifier. The comparison results help in concluding the feasibility of S-band laser emission. Based on the model, the influences of fiber properties (including core doping level, core -clad ratio, and fiber length), pump power and laser power on the operation of S-band fiber lasers or amplifiers are researched. The analysis shows that fibers with lower doping level, larger core-clad ratio and shorter length, seed with higher power, are more helpful in realizing high power S-band laser output. Also, the profile of oscillator is found more suitable in building high power S-band lasers than that of amplifier.

Experimental Study of SRS Threshold Dependence on the Bandwidths of Fiber Bragg Gratings in Co-Pumped and Counter-Pumped Fiber Laser Oscillator

Raman suppression in high-power fiber oscillators by femtosecond-written chirped and tilted fiber Bragg gratings

Influence of Bragg Reflection of Chirped Tilted Fiber Bragg Grating on Raman Suppression in High-Power Tandem Pumping Fiber Amplifiers.

Raman suppression in high-power fiber laser oscillator by long period fiber grating

Optical Properties of High Power S-Band Fiber Oscillators and Amplifiers

Femtosecond laser fabrication of large-core fiber Bragg gratings for high-power fiber oscillators

Narrow Line-Width Ytterbium-Doped Fiber Ring Laser Based on Saturated Absorber

Fabrication of cascaded wideband LPFGs by CO2 laser and Raman suppression in a 5 kW one-stage MOPA fiber laser

Stimulated Raman scattering suppression by intensified four-wave mixing process in narrow-linewidth fiber oscillator

The role of learning in homeostasis.

High Order Cascaded Raman Random Fiber Laser with High Spectral Purity

Study on Stimulated Brillouin Scattering Pulse Waveform

Raman suppression in 5 kW fiber amplifier using long period fiber grating fabricated by CO2 laser

293 W, GHz narrow-linewidth, polarization maintaining nanosecond fiber amplifier with SBS suppression employing simultaneous phase and intensity modulation

Narrow Linewidth Fiber Laser Oscillator Based on Fiber Bragg Grating with High Power Spectral Density

2.19 kW narrow linewidth FBG-based MOPA configuration fiber laser.

6.85 Kw Ytterbium-Raman Fiber Amplifier Based on Adjustable Raman Threshold Method

Effective suppression of mode distortion induced by stimulated Raman scattering in high-power fiber amplifiers

Novel constant-cladding tapered-core ytterbium-doped fiber for high-power fiber laser oscillator

Utilizing phase-shifted long-period fiber grating to suppress spectral broadening of a high-power fiber MOPA laser system

Design and fabrication of wideband chirped tilted fiber Bragg gratings