Abstract:Fiber Bragg Gratings (FBG) have great significance in the development of high-power fiber laser systems. Fabrication sources, fibers, and fabrication technology would affect the performance of FBGs directly. In this research, a scanning exposure method for fabricating FBGs in different types of photosensitive fibers with a 213nm solid-state laser source was proposed. The Q-switched Nd: YVO4 laser fifth harmonic source was compared with the traditional excimer lasers and the impacts of lengths, center wavelengths, titled angles, and apodization on the reflection and transmission spectra of FBGs were discussed. The scanning fabrication system, which can realize the tilting of phase mask and the adjustment and monitoring of tension, was built according to the characteristics that the output spot diameter of the fabrication source was sub-millimeter. While the high quality of fabrication was guaranteed, FBGs with lengths of 3mm~20mm, center wavelengths shift of 0nm~4.2nm, and tilted angles of 0~21 were obtained, and all the parameters were simultaneously adjusted and controlled, the deepest transmission loss of about -70dB. FBGs fabricated were of good stability and repeatability, especially in hydrogen fibers whose stability was independent of high-temperature annealing (1500C) which was different from the fabrication results of excimer laser sources. Then the unconformity between experimental results and theoretical simulation was discussed and the optimization schemes were proposed. The experimental results and analysis provided a better experimental scheme for UV laser fabricating FBGs and the experimental basis for further optimizing the fabrication technology and further analyzing the microscopic mechanism of optical fiber photosensitivity.

Design and fabrication of wideband chirped tilted fiber Bragg gratings

Influence of Bragg Reflection of Chirped Tilted Fiber Bragg Grating on Raman Suppression in High-Power Tandem Pumping Fiber Amplifiers.

Raman suppression in high-power fiber oscillators by femtosecond-written chirped and tilted fiber Bragg gratings

Fabrication of cascaded wideband LPFGs by CO2 laser and Raman suppression in a 5 kW one-stage MOPA fiber laser

Robust femtosecond-written chirped and tilted fiber Bragg gratings for Raman filtering in multi-kW fiber lasers

Refined Spectral Regulation of Chirped Fiber Bragg Gratings

Silt-Beam Shaping Method for Femtosecond Laser Point-by-Point Inscription of Highly Localized Fiber Bragg Gratings with Enhanced Cladding Modes

Optimized femtosecond laser direct-written fiber Bragg gratings with high reflectivity and low loss

Raman suppression in 5 kW fiber amplifier using long period fiber grating fabricated by CO2 laser

Femtosecond Laser Inscribed Chirped Fiber Bragg Gratings.

Fabrication of fiber Bragg gratings with precisely adjustable and controllable parameters based on 213nm solid-state laser

Femtosecond laser fabrication of large-core fiber Bragg gratings for high-power fiber oscillators

Drawing-tower Inscription of Apodized Fiber Bragg Grating Arrays Using a Rotated Focusing Cylindrical Lens

High-Quality Fiber Bragg Gratings Inscribed by Femtosecond Laser Point-by-Point Technology

C-band 41-wavelength-switchable single-longitudinal-mode fiber laser with sub-kHz linewidth and high stability using a wide-band chirped Moiré fiber Bragg grating

Raman suppression in high-power fiber laser oscillator by long period fiber grating

3.3 Kw Narrow Linewidth FBG-based MOPA Configuration Fiber Laser with Near-Diffraction-limited Beam Quality

All-fiber Chirp Tuning of Ultrashort Pulses Via Long Chirped Fiber Bragg Grating Pair

Fiber Bragg gratings fabricated by femtosecond lasers for narrow-linewidth fiber laser

A linear chirp fiber Bragg grating with tunable bandwidth enabled by MXene's photothermal effect