Abstract:A high-power quasi-continuous microsecond pulse sodium guide laser was generated by ex-tra-cavity sum frequency of Nd :YAG 1064 and 1319 nm spectral line lasers in a Lithium Borate (LBO) crystal .The three wave coupling equations of the sum-frequency process were simulated by the im-proved Euler method ,and the waist size of fundamental light and the length of LBO crystal were opti-mized .To improve the sum frequency efficiency ,the spatial mode matching and time domain pulse synchronization of two fundamental lasers were realized by the beam shaping of image propagation and the precise control of trigger delay .The laser outputs were researched ,and the results show that the 589 nm laser outputs with the powers of 53 ,42 .6 ,27 and 22 Ware obtained under the conditions of 500 ,600 ,800 and 1000 Hz ,and the corresponding sum-frequency efficiencies are 21 .8％ ,20 .3％ , 16 .9 ％ and 16 .3％ ,respectively .Moreover ,the beam quality factor of M2 is 1 .32 and the pulse width is 100 μs at the maximum power of yellow light .A control system compound by a PZT and a stepper motor was used to stabilize the frequency ,and results indicate that the frequency fluctuation is in the range of ± 0 .2 GHz ,which ensures that the wavelength of yellow light is within the D2a absorp-tion spectrum of sodium atom .The research results iprovide a technologic support for generating 50 Whigh-power quasi-continuous microsecond pulse sodium guide lasers .

High beam quality narrow linewidth microsecond pulse Ti:sapphire laser operating at 819.710 nm

High Pulse Energy, High Beam Quality Microsecond-Pulse Ti:sapphire Laser at 819.7 Nm

Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

Sub-pm linewidth, high pulse energy, high beam quality microsecond-pulse Ti:sapphire laser at 766.699 nm

High-Power and High-repetition-rate widely tunable Narrow-Linewidth low-gain-band Ti: Sapphire laser

A High-Pulse-Energy High-Beam-Quality Tunable Ti:Sapphire Laser Using a Prism-Dispersion Cavity

Nonlinear Generation of a Neat Semi-Gaussian Laser Beam with a Transversely Varying Periodically-Poled LiTaO_3 Crystal

Sodium Guide Star Laser Generation by Single-Pass Frequency Doubling in a Periodically Poled Near-Stoichiometric LiTaO3 Crystal

High-Power High Beam Quality Narrow-Linewidth Quasicontinuous Wave Microsecond Pulse 1064-Nm Nd:YAG Amplifier

High-power Quasi-Continuous Microsecond Pulse Sodium Guide Star Laser

Photonic-circuit-integrated titanium:sapphire laser

Nanosecond-pulse High-Peak-power Circle-Focusing Laser Beam for Laser Processing

High-power QCW Microsecond-Pulse Solid-State Sodium Beacon Laser with Spiking Suppression and D_2b Re-Pumping

180 mJ, long-pulse-duration, master-oscillator power amplifier with linewidth less than 25.6 kHz for laser guide stars.

Generation of 4.5mw Femtosecond Pulse with A Compact All Solid-State Cavity-Dumped Ti : Sapphire Laser

180 Mj, Long-Pulse-duration, Master-Oscillator Power Amplifier with Linewidth Less Than 256 Khz for Laser Guide Stars

3 GHz, Yb-fiber laser-based, few-cycle ultrafast source at the Ti:sapphire laser wavelength

Ti : Sapphire Laser Pumped Cr4+,Nd3+: Yag Self-Q-Switched Microchip Laser

Watt level laser source for a polychromatic laser guide stars: double resonant fluorescence from 3S-3P-3D transition of sodium atoms.

Watt level laser source for a polychromatic laser guide stars: double resonant fluorescence from 3S1/2-3P3/2-3D5/2 transition of sodium atoms

15 fs-pulse generation from a self-mode-locked Ti:sapphire laser with low pump power