Abstract:Recently, sodium ion batteries (NIBs) gained increasing attention, because of its abundant reserves and relatively even geological distribution. However, the development of NIBs is greatly hampered because of the lack of appropriate active materials for both cathodes and anodes. Since the Na ion is ca. 55% larger than the Li ion, finding suitable host materials with sufficiently large interstitial space to accommodate sodium ions and to allow reversible and rapid ion insertion and extraction is very difficult. NASICON-type Na3V2(PO4)3 has recently been considered as a prospective cathode material for NIBs, because of its highly covalent 3D framework crystalline structure, high energy density (~400 Wh/kg) and good thermal stability. For anode materials, disordered carbon is particularly attractive because of their large interlayer distance and disordered structure that could accommodate sodium ions. Here, we briefly present porous carbon based electrodes for NIBs with excellent rate performance: (1) Carbon-coated nanosized Na3V2(PO4)3 embedded in the porous carbon matrix (abbreviated as CC-NVP@PCM); (2) Nitrogen-doped activated porous carbon fibers (ACFs); (3)Flexible free-standing porous carbon nanofibers (P-CNFs) with three-dimensional (3D) interconnected structure. The CC-NVP@PCM was prepared by using a facile soft-chemistry based method with post heat-treatment. It shows high rate performance (44 mAhg-1at 200C ). This ultrahigh rate performance is comparable to that of supercapacitor, but with much higher energy density. The ACFs were synthesized by pyrolysis of Ppy nanofiber precursor. It shows excellent capacity retention and extraordinary rate performance. The reversible capacity at 0.05 Ag-1 is 296 mAhg-1 and could still maintain as 72 mAg-1 at a current of 10 Ag-1. In case of the P-CNFs electrode prepared by electrospinning, it delivers a reversible capacity of 266 mAh.g-1 after 100 cycles at 0.2C, corresponding to 80.3 % of the initial charge capacity. When cycled at a current density as high as 500 mAg-1 (2C), it still delivers a reversible capacity of ~140 mAh.g-1after 1000 cycles. The improvement of electrochemical performance of these porous carbon based electrodes for NIBs is attributed to the special design and porous structure, which confined a variety of advantages: hierarchical porous channels enabling short transport length for ions and electrons, carbon coated structure resulting in low resistances, good mechanical properties leading to the excellent morphology stability.

Utilization of Biomass Pectin Polymer to Build High Efficiency Electrode Architectures with Sturdy Construction and Fast Charge Transfer Structure to Boost Sodium Storage Performance for NASICON-type Cathode

Porous Carbon Globules with Moss-Like Surfaces from Semi-Biomass Interpenetrating Polymer Network for Efficient Charge Storage

Unlocking Charge Transfer Limitation in NASICON Structured Na3V2(PO4)3 Cathode via Trace Carbon Incorporation

Synthesizing Porous NaTi2(PO4)3 Nanoparticles Embedded in 3D Graphene Networks for High-Rate and Long Cycle-Life Sodium Electrodes.

Rationally Designed Sodium Chromium Vanadium Phosphate Cathodes with Multi‐Electron Reaction for Fast‐Charging Sodium‐Ion Batteries

Small but mighty: Empowering sodium/potassium‐ion battery performance with S‐doped SnO2 quantum dots embedded in N, S codoped carbon fiber network

Electrodes for Sodium-Ion Batteries with Excellent Rate Performance Using Porous Carbon Networks

A Novel NASICON-Type Na3.5MnCr0.5Ti0.5(PO4)3 Nanofiber with Multi-electron Reaction for High-Performance Sodium-Ion Batteries

Eliminating Charge Transfer at Cathode-Electrolyte Interface for Ultrafast Kinetics in Na-Ion Batteries

Carbon-incorporated NaTi2(PO4)3 on carbon cloth as a binder-free anode material for high-performance aqueous sodium-ion hybrid capacitors

Multifunctional-Element Doping of NASICON-Structured Cathode Enables High-Rate and Stable Sodium Storage

Boosting High‐Rate Sodium Storage Performance of N‐Doped Carbon‐Encapsulated Na <sub>3</sub> V <sub>2</sub> (PO <sub>4</sub> ) <sub>3</sub> Nanoparticles Anchoring on Carbon Cloth

A NASICON-type Na3.67Cu0.17Fe0.5V1.33(PO4)3 cathode with multi-electron reaction for high-energy sodium-ion battery

Heterogeneous NASICON-Type Cathode With Reversible Multielectron Reaction for High-Performance Sodium-Ion Batteries

Overcoming Electron/ion Transport Barriers in NASICON-type Cathode Through Mixed-Conducting Interphase

Exceeding Three-Electron Reactions in Polyanionic Cathode to Achieve High-Energy Density for Sodium-Ion Batteries

A Strategy of High Entropy Enabling Advanced NASICON Sodium-ion Cathodes with High Stabilization and Multicationic Redox

Moving to Aqueous Binder: A Valid Approach to Achieving High‐Rate Capability and Long‐Term Durability for Sodium‐Ion Battery

Electrospun Na3v2(Po4)(3)/C Nanofibers As Stable Cathode Materials for Sodium-Ion Batteries

Homogeneous Hybridization of NASICON-type Cathode for Enhanced Sodium-Ion Storage

Nitrogen Configuration Modulation of Porous Graphitic Carbon Nanosheets for Superior Capacitive Energy Storage