Abstract:The present paper introduces the stray light and bandpass correction methods for spectrometers. The line spread function of spectrometer is characterized by a He-Ne laser. Assuming that the spectrometer is a wavelength invariable system, the stray light distribution matrix is constructed by the derived line spread functions. The stray light correction matrix is then derived by matrix conversion from the stray light distribution matrix. The measured signals of the spectrometer are finally multiplied by the stray light correction matrix to correct the stray light errors. The bandpass functions of the spectrometer are characterized in three different wavelength ranges, respectively. And then three groups of bandpass correction coefficients are calculated accordingly. The calculation is divided into several steps. Given the measurement results at the target wavelength position and the ones on the neighbor bandwidths, the bandpass correction results are obtained by weight averaging of them. The bandpass correction coefficients are used as the weights. The two correction methods are applied to a multi-channel fast spectrometer to measure LEDs of different color. The results show that the stray light and the bandpass errors can be corrected effectively. The chromaticity coordinates of the LEDs are corrected by (-0.003, 0.007) for the maximum. Furthermore, the method introduced in this paper can reduce the application cost, simplify the calculation under a reasonable precision, and make the application of the correction easier.

Design and Implementation of Portable LED Uniform Light Source with Diffuse Reflection

Stray Light And Bandpass Correction In The Spectral Measurement For Light Emitting Diodes

Optical Design in Packaging and Illuminating System for High Power Light-Emitting Diodes for Projection System

Fast and High-Accuracy Spectral Measurements of LED by Linear CCD Sensor and Software Calibration

Automatic Measurement for Light Distribution Curve of Ultra High Pressure Mercury Lamps

Spectrum measurement for LED-based spectrum-tunable source

Etendue analysis and measurement of light source with elliptical reflector.

The Freeform Reflector for Uniform Rectangular Illumination

Measurement of Led Spatial Intensity Distribution Using Imaging

Uniform illumination design by configuration of LEDs and optimization of LED lens for large-scale color-mixing applications.

Study on a system for LED's photometric and colorimetric measurement based on a multi-channel spectrometer

Optical design for uniform color mixing illumination system

A research of laboratory instrument for LED property measurement

The design of the freeform reflector for uniform illumination

Study on a Spectrophotometer System for Measuring LED's Photometric Parameters

Design of Multi-Point Real-Time Lithography Light Source Uniformity Detection System

Optimization design of irradiance array for LED uniform rectangular illumination.

THE IMPLEMENTATION AND ERROR ANALYSIS OF THE NOVEL DEVICE FOR LED'S TOTAL LUMINOUS FLUX MEASURING

Design and optical characteristics simulation of LED plant lighting source

A Novel LED Uniform Illuminance System Based on Nonimaging Optics

A Design of LED Light Intensity Distribution Measuring Device and Fitting in Matlab