Abstract:Scanning electron microscope (SEM) and its variations, such as critical dimension SEM (CD-SEM) and electron beam inspection (EBI-SEM), are getting increasingly critical in process control in very large-scale integration circuits (VLSI) manufacturing. For rapid capturing of image, the patterned wafer surface needs to be maintained in a range smaller than the depth of focus (DoF) of the electron beam. A triangulation optical system is used to sense the wafer surface for the rapid leveling of the wafer height in real time. An optical grating illuminated by a LED light source is projected onto the wafer and further imaged to a camera. The wafer height is calculated from the displacement of the optical grating image. However, pattern variation under the measurement area of the wafer may affect the transmission ratio of the light to the sensor and further the measurement accuracy. To achieve a high precision measurement result, an automatic light intensity adjustment system is developed. A computer records the optical grating image and the image intensity is analyzed. If the grating image intensity in the bright area is not in the desired range, a control software will convert the delta into the LED driving current increment or decrement, and the LED light output will be adjusted accordingly so that the image intensity is brought back to the expected range and keep there for the entire process. The LED feedback control experiment shows that the system remains at the target grey level without noticeable variation when the system transmission ratio varies by a factor of 7.5 times.

Design of Multi-Point Real-Time Lithography Light Source Uniformity Detection System

An Automatic Measurement System for LuminanceDistribution of Color Kinescope Electron Beam

Machining Precision Online Measurement of Large Span Pin Hole Using Structured Light

Distance Measuring Using Single-Point Laser Triangulation System Design Based on CMOS

Compact Ultraviolet Light-Emitting Diode-Based Lithography Illumination System with Tunable Coherent Factor

Automatic Measurement for Light Distribution Curve of Ultra High Pressure Mercury Lamps

Measurement of Led Spatial Intensity Distribution Using Imaging

Fast Wafer Focus Measurement System for Photolithography Using On-Axis Structure Illumination Method

Uniform illumination design by configuration of LEDs and optimization of LED lens for large-scale color-mixing applications.

Effect of Light Source Uniformity for Imaging Ellipsometry Measurements

Optimization design of irradiance array for LED uniform rectangular illumination.

LED Projection Light Brightness Uniformity Detection System Design

A Study of the Impact on Telecentricity to the Illumination System Based on Ccd Imaging

Measuring surface light source luminance by using digital imaging device

Efficient Single-Pixel Batch Measurement Method for Optical Properties of Micro-Sized LED Array

Automatic control of LED light source for wafer height leveling in electron beam imaging systems

Study of Optical Characteristic Point Luminance Control Method

Measurement and Compensation of DLP Projector Light Intensity for Mask Projection Stereolithography

The Impact of Control Point Dispersion on Measurement Accuracy in a New Type of Light-Pen Coordinate Measuring System

Study on a system for LED's photometric and colorimetric measurement based on a multi-channel spectrometer

An Efficient and Low-Cost Compensation Method for Exposure Uniformity Based on Digital Oblique Scanning Lithography