Abstract:An olivine-structured solid solution, LiFe0.4Mn0.4Co0.2PO4/C nanocomposite, was synthesized as cathode materials for Li-ion batteries by the coprecipitation-and-milling method using stearic acid as the carbon source. Thus-formed LiFe0.4Mn0.4Co0.2PO4/C solid solution was well confirmed and characterized by various techniques such as SEM, TEM and XRD. The LiFe0.4Mn0.4Co0.2PO4/C-based cathode delivered an initial discharge capacity of 163.3 mAh g(-1) at 0.1 C, together with a capacity retention rate of 86.6% after 50 cycles in the potential range of 2.5-5 V. Even at 1 C, a discharge capacity of 104.7 mAh g(-1) was maintained after 100 cycles. The good electrochemical performance of the LiFe0.4Mn0.4Co0.2PO4/C could be attributed to the homogeneous mixing of Fe, Mn and Co elements in relevant precursor solid solution Fe0.4Mn0.4Co0.2C2O4 center dot 2H(2)O. Its characteristic CV profiles reveal three pairs of anodic/cathode peaks which could be assigned to the redox reactions of Co3+/Co2+, Mn3+/Mn(2+)and Fe3+/Fe2+ with potential plateaus at about 4.7 V, 4.1 V and 3.5 V in the charge/discharge curves, respectively. Our study demonstrates that the LiFe0.4Mn0.4Co0.2PO4/C is a promising cathode material of Li-ion battery and the coprecipitation-andmilling method represents a workable strategy towards the synthesis of high-performance phosphate-type composite cathode. (C) 2018 Elsevier B.V. All rights reserved.

Synthesis of LiFe0.4Mn0.4Co0.2PO4/C Cathode Material of Lithium Ion Battery with Enhanced Electrochemical Performance

Ascorbic Acid-Assisted Solvothermal Synthesis of LiMn 0.9 Fe 0.1 PO 4 /C Nanoplatelets with Enhanced Electrochemical Performance for Lithium Ion Batteries

High-performance Carbon-Coated LiMnPO4 Nanocomposites by Facile Two-Step Solid-State Synthesis for Lithium-Ion Battery

Synthesis mechanism and characterization of LiMn0.5Fe0.5PO4/C composite cathode material for lithium-ion batteries

Synthesis Mechanism and Characterization of LiMn 0.5 Fe 0.5 PO 4 /C Composite Cathode Material for Lithium -Ion Batteries

Preparation and Electrochemical Properties of Carbon-Coated LiMn0.6Fe0.4PO4 Cathode Material for Lithium-Ion Batteries

Based on first-principles calculation, study on the synthesis, and performance of Fe–Ni co-doped LiMnPO4/C as cathode material for lithium-ion batteries

Synthesis and electrochemical characterization of LiFePO4/C Cathode materials for Li-ion batteries

Enhancing electrochemical performance of Mn doped LiFePO4 cathode materials for lithium-ion batteries

The Synthesis of LiMn x Fe 1-x PO₄/C Cathode Material through Solvothermal Jointed with Solid-State Reaction.

Green Phytic Acid-Assisted Synthesis of LiMn1-xFexPO4/C Cathodes for High-Performance Lithium-Ion Batteries

Microsphere LiMn0.6Fe0.4PO4/C Cathode with Unique Rod-Like Secondary Architecture for High Energy Lithium Ion Batteries

High power performance of multicomponent olivine cathode material for lithium-ion batteries

A nanocomposite of Li 2 MnO 3 coated by FePO 4 as cathode material for lithium ion batteries

The Synthesis of LiMnxFe1−xPO4/C Cathode Material through Solvothermal Jointed with Solid-State Reaction

Li 0.99 Ti 0.01 FePO 4 /C composite as cathode material for lithium ion battery

A Novel Synthesis and Characterization of LiFePO4 and LiFePO4/C As a Cathode Material for Lithium-Ion Battery

High-performance, nanostructure LiMnPO 4 /C composites synthesized via one-step solid state reaction

Preparation of Carbon-Coated LiFe0.2Mn0.8PO4 Cathode Material and Its Application in a Novel Battery with Li4Ti5O12 Anode

Impedance studies of LiMn0.8Fe0.2PO4/C cathodes for lithium-ion batteries

Concentration‐gradient structural LiFe0.5Mn0.5PO4/C prepared via co‐precipitation reaction for advanced lithium‐ion batteries