Abstract:This paper presents a 27.7-31.2 GHz highly integrated 8-element 4-beam transmitter front end in 65-nm CMOS for phased-array applications. The proposed hybrid variable-gain amplifier (VGA) combines digital common-source (CS) VGA and analog Gilbert-cell-based VGA to realize a large tuning range and high resolution simultaneously. Furthermore, the proposed VGA scheme also integrates with an active combining network to implement a compact multi-beam structure. In the vector-modulation-based phase shifter (PS), low/high pass lumped delay lines are inserted between CS transistors and common-gate (CG) transistors to form I/Q signals which drive four pairs of Gilbert-cell based G(m)-arrays for different phase states. In addition, the output element leverages a symmetrical transformer-based Doherty power amplifier (PA) and an analog adaptive bias to improve the power-back-off (PBO) efficiency with a high peak-to-average-ratio (PAPR) modulation signal. With a 1.1-V supply voltage, this front end achieves a saturated output power (P-sat) of 19.2 dBm with a 20.5% channel efficiency and a 1-dB compression point (OP1dB) of 18.2 dBm. The measured maximum drain efficiency (DE) is 40.8% and 6-dB PBO DE is 28%. Compared with class-B/A PAs, the DE is improved by 40%/180%. The proposed hybrid VGA achieves a 27-dB tuning range and a 0.25-dB gain step with 0.26 dB/1.9 degrees RMS gain/phase errors. The active PS implements 6-bit 360 degrees phase shifting with 0.25 dB/2.5. RMS gain/phase errors.

An 8-18Ghz Class-Ab Power Amplifier with 16dbm Output Power and 23% PAE over Entire X-Ku Band

A High Linearity Class AB Power Amplifier for Sub-1 GHz Applications

Design of X/Ku Dual-Wideband GaN Power Amplifier MMIC Based on Coupled Multiresonator Matching Networks

A Ka-band 8-Element 4-Beam Transmitter Front End with Hybrid VGA and Symmetrical Transformer-based Doherty PA

Fully integrated pseudo differential K-band power amplifier in 0.13um standard CMOS

A Class-F Based Power Amplifier with Optimized Efficiency in Triple-Band

A 22.8 GHz to 32.8 GHz Compact Power Amplifier with a 15 Dbm Output P1dB and 36.5% Peak PAE in 65-Nm CMOS.

Design of Ka-Band Broadband High-Gain Power Amplifier in 65-Nm CMOS

An 8–18 GHz Power Amplifier with Novel Gain Fluctuation Compensation Technique in 65 Nm CMOS

A Compact Wideband High-Efficiency Power Amplifier for Ku-Band Applications

A 38-48 GHz Power Amplifier with 23-dB Gain 18.5-dBm Psat and 28% PAE in 65-nm CMOS

A Full Ka-Band Power Amplifier with 32.9% PAE and 15.3-Dbm Power in 65-Nm CMOS

A Ka-band Power Amplifier Improving OP1dB through Gain Expansion Achieving 28.1% PAE

32.4 A 67.8-to-108.2ghz Power Amplifier with a Three-Coupled-Line-Based Complementary-Gain-Boosting Technique Achieving 442ghz GBW and 23.1% Peak PAE

A 5.8 GHz Class-Ab Power Amplifier with 25.4 Dbm Saturation Power and 29.7% PAE

A Broadband Power Amplifier Covering 14-36 GHz in 65-nm CMOS Technology

A 9.5&#x2013;18.5 GHz Power Amplifier for Multi-Band Microwave Point-to-point Backhaul Communication

A Wideband Variable Gain Power Amplifier with Phase Compensation and PAE Enhancement Techniques in 65 Nm CMOS Technology

A 23-30 GHz 4-Path Series-Parallel-Combined Class-AB Power Amplifier with 23 Dbm Psat, 38.5% Peak PAE and 1.3° AM-PM Distortion in 40nm Bulk CMOS

A millimeter-wave broadband power amplifier with a tree-like transistor structure using 0.15-& mu;m GaAs technology

A Compact 19.7-to 43.8-Ghz Power Amplifier with 20.3-Dbm $p_{\mathrm{sat}}$ and 35.5% PAE in 28-Nm Bulk CMOS