Abstract:To bring the potential power of the capacitively coupled contactless conductivity detection ((CD)-D-4) technique to full play and extend the application fields of (CD)-D-4, our previous work has developed a (CD)-D-4 sensor which is suitable for conductivity detection of electrolyte solution in industrial fields (Sensors and Actuators A 213 (2014) 1-8). With the introduction of series resonance principle, the (CD)-D-4 sensor can overcome the influence of coupling capacitances on conductivity measurement. By a specific design of shield configuration, the (CD)-D-4 sensor can overcome the influence of stray capacitances and the environment interference in industrial fields. Although the measurement performance of the (CD)-D-4 sensor is satisfactory and it is suitable for the conductivity detection in industrial fields, the input-output characteristic of the (CD)-D-4 sensor is non-monotonic, which may limit the practical applications of the (CD)-D-4 sensor. To overcome this drawback, an improved (CD)-D-4 sensor for conductivity detection in industrial fields has been developed. The basic conductivity measurement method (the series resonance principle) and the shield configuration of the improved (CD)-D-4 sensor are the same as those of the (CD)-D-4 sensor in our previous work. However, the measurement circuit of the detection path of the improved (CD)-D-4 sensor has been optimized. The one-inductor design has been replaced by a two-inductor design. With this optimization, the input-output characteristic of the improved (CD)-D-4 sensor is theoretically monotonic. Conductivity measurement experiments were carried out on four pipes with inner diameters of 1.8 mm, 3.3 mm, 5.0 mm and 7.6 mm, respectively. The experimental results indicate that the development of the improved (CD)-D-4 sensor is successful. In comparison with the previous (CD)-D-4 sensor, the measurement accuracy of the improved (CD)-D-4 sensor is comparable. But, the improved (CD)-D-4 sensor has the advantages of the monotonic input-output characteristic and the convenience for practical conductivity detection in industrial fields. Meanwhile, it is found that the input-output characteristic of the improved (CD)-D-4 sensor is nonlinear and the sensitivity of the improved (CD)-D-4 sensor decreases with the increase of conductivity. (C) 2015 Elsevier B.V. All rights reserved.

Analysis Of Open-Cell Planar Conductivity And Temperature Sensors Based On Pcb

An Integrated Miniature Conductivity And Temperature Sensor Chip With Open-Cell Annular Electrode

Simulation Analysis on Characteristics of a Planar Capacitive Sensor for Large Scale Measurement

Design and Implementation of an Industrial C4D Sensor for Conductivity Detection

Study on the Application of Simulated Inductor Technique to the Design of C 4 D Sensor

Design of Capacitively Coupled Contactless Conductivity Detection Sensor

A Low Excitation Working Frequency Capacitively Coupled Contactless Conductivity Detection (C4D) Sensor for Microfluidic Devices

Numerical Design and Experimental Analysis of Cell-Based Sensors

Analysis of mechanical errors of planar capacitive sensor for two dimensional displacement measurement

An Improved Capacitively Coupled Contactless Conductivity Detection Sensor for Industrial Applications

Investigation of multifunctional cell physiological analysis instrument based on integrated chip

Low-Cost Wireless Temperature Measurement: Design, Manufacture, and Testing of a PCB-Based Wireless Passive Temperature Sensor

Analysis of the Sensitivity and Frequency Characteristics of Coplanar Electrical Cell-Substrate Impedance Sensors

Influence of the PCB Manufacturing Process on the Measurement Error of Planar Relative Permittivity Sensors Up To 100 GHz

Designs of Eddy Current Sensor Probes Based on Multi Layer Printed Circuit Board Technology

Efficient Analysis of Radiated Immunity of Printed Circuit Boards Using SPICE

PCB-C 4 D coupled with paper-based microfluidic sampling for the rapid detection of liquid conductivity

A Direct-Reading MEMS Conductivity Sensor with a Parallel-Symmetric Four-Electrode Configuration

Design of Surface Plasmon Resonance-Based D-Type Double Open-Loop Channels PCF for Temperature Sensing

Contactless Thermal Characterization Method of PCB-s Using Different IR Sensor Arrays

Wireless Temperature Measurement for Curved Surfaces Based on AlN Surface Acoustic Wave Resonators