Abstract:A film bulk acoustic wave resonator (FBAR) is a type of resonator with high frequency and small dimensions, particularly suitable for use as a sensor for physical and biochemical sensing with high sensitivity. FBAR-based sensors have been extensively studied, however they commonly use discrete devices and network analyzers for evaluation, and therefore are far from being able to be used in practical applications. This paper reports the design and analysis of an FBAR-based Pierce oscillator and a field-programmable gate array (FPGA)-based frequency counter, and the use of the oscillator as a humidity sensor with the frequency counter as the measuring circuit. Graphene oxide (GO) is used as the sensitive film to improve the sensitivity. The resonant frequency of the oscillator with a GO film shows a linear decrease with an increase in relative humidity, with a sensitivity of ca. 5 kHz per % RH (relative humidity) in the range of 3% RH to 70% RH, and a higher frequency shift is induced above 70% RH. The FBAR oscillator sensor shows excellent stability and repeatability, demonstrating the feasibility and potential sensing application using the integrated FBAR chip and simple frequency counter, particularly suitable for portable electronics.

A Humidity Sensor Based on Lamb Wave Resonator with Different Graphene Oxide Film

Fiber Optic Relative Humidity Sensor Based On The Tilted Fiber Bragg Grating Coated With Graphene Oxide

A Humidity Sensor Based on AlN Lamb Wave Resonator Coated with Graphene Oxide of Different Concentrations

Highly Sensitive AIN Surface Acoustic Wave Humidity Sensor Based on Uniform Graphene Oxide Thin Film Formed by Surface Tension

An Aln Two-Dimensional Acoustic Wave Humidity Sensor With Graphene Oxide As Sensing Layer

Surface acoustic wave humidity sensors based on uniform and thickness controllable graphene oxide thin films formed by surface tension

A PIEZOELECTRIC RESONANT HUMIDITY SENSOR WITH ENHANCED SENSITIVITY BASED ON HIGH MODE DRIVEN BY INTERDIGITAL TRANSDUCERS COATED WITH UNIFORM GRAPHENE OXIDE FILM

A High Performance Humidity Sensor Based on Surface Acoustic Wave and Graphene Oxide on AlN/Si Layered Structure

High performance graphene oxide-based humidity sensor integrated on a photonic crystal cavity

Humidity sensor based on core-offset fiber Mach-Zehnder interferometer coated graphene oxide film

A Novel Humidity Sensor Based On Circular Interdigital Transducers Excited Aln Lamb Wave Device Incorporating Graphene Oxide Layer

A HUMIDITY SENSOR WITH HIGH SENSITIVITY AND LOW TEMPERATURE COEFFICIENT OF FREQUENCY BASED ON ALN SURFACE ACOUSTIC WAVE AND GRAPHENE OXIDE SENSING LAYER

Specific Sensing Mechanism Investigation of Surface Acoustic Wave Humidity Sensors Coated with Uniform Graphene Oxide Membrane

A fast response and highly sensitive flexible humidity sensor based on a nanocomposite film of MoS2 and graphene oxide

Humidity Sensor Composed of Laser-Induced Graphene Electrode and Graphene Oxide for Monitoring Respiration and Skin Moisture

A Film Bulk Acoustic Resonator Oscillator Based Humidity Sensor with Graphene Oxide As the Sensitive Layer

Fast Response and High Sensitivity ZnO/glass Surface Acoustic Wave Humidity Sensors Using Graphene Oxide Sensing Layer

Humidity Sensor With Graphene Oxide As Sensing Material

A Highly Responsive Graphene Oxide Humidity Sensor Based on PVA Nanofibers.

Fast response and highly sensitive flexible humidity sensor based on nanocomposite film of MoS2 and graphene oxide

Fabrication of Humidity Sensors Based on Laser Scribed Graphene Oxide/SnO2 Composite Layers