Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Dual-Band Bandpass Filter Using Varactor Loaded Square Split Ring Resonator

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

An Extended Doublet Substrate Integrated Waveguide (SIW) Bandpass Filter with a Complementary Split Ring Resonator (CSRR)

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators

A Tri-Band Filter Using Tri-Mode Stub-Loaded Resonators (Slrs)

The design and test of dual/triple-mode bandpass filter based on temporal coupled-mode theory

A Miniaturized Dual‐mode Zeroth‐order Ring Bandpass Filter with One Left‐handed Unit and a Capacitive Stub

Extended Doublet Bandpass Filters Implemented with Microstrip Resonator and Full-/Half-Mode Substrate Integrated Cavities

Miniaturized Dual-Band Bandpass Filter Using &#x03bb;/2 Spiral-Resonator and Loaded Open-Stub

A compact dual‐band bandpass filter based on coupled stub‐loaded square ring resonators by using transversal signal‐interaction concepts

Dual-band bandpass filter using centrally coupled resonators (CCRs)

A Compact Tri-Band Microstrip Filter with Independently Tunable Passbands and High Selectivity

Sharp-rejection dual ultra-wideband bandpass filter using sextuple mode resonator

Design of dual-band tunable bandpass filter with constant absolute bandwidth based on triple transmission path

A 10.23–15.7-GHz Varactor-Tuned Microstrip Bandpass Filter With Highly Flexible Reconfigurability

A Tunable Balanced Dual‐band BPF with Quasi‐independently Controlled Center Frequency and Bandwidth

A Triple-Mode Passband Filter With Improved Upper-Stopband Performance

A Fully Packaged Bandpass Filter on Stripline Patch Resonator With Wide Upper Stopband

Compact Dual-band Bandpass Filter Using Coupled Lines Multimode Resonator