Abstract:Plasma-assisted ammonia synthesis in a packed dielectric barrier discharge (DBD) reactor at atmospheric pressure is presented in this work. A broad range of materials (commonly used as catalyst supports) with various chemical properties (acidic α-Al2O3, anatase TiO2 and basic MgO, CaO), surface area and porosity (α-Al2O3 and γ-Al2O3), dielectric properties (quartz wool, TiO2, and BaTiO3), have been investigated for synergetic effects by packing them in the discharge zone of the DBD reactor. All the materials showed a substantial effect on ammonia production, which can be explained solely as a result of the effect of packing on plasma formation and not by a synergy between plasma and surface catalysis. Size and shape of packing material are found to be the key parameters in enhancing the performance. Quartz wool, closely followed by γ-Al2O3, produces the highest concentration of ammonia at 2900 and 2700 ppm, respectively, due to their ability to generate dense filamentary microdischarges. Particles with a diameter of 200 µm yielded a 64% higher concentration of NH3 than 1300 µm particles—because of amplified electric field strength from increased particle-particle contact points. The specific energy input per unit volume also displayed a significant impact on ammonia production. The process parameters such as N2/H2 feed flow ratio, total flow rate and argon dilution were also investigated. In contradiction to catalytic ammonia synthesis, plasma-assisted synthesis favors a N2/H2 feed ratio ≥2 instead of the stoichiometric feed ratio of 0.33. At 0.4 l min−1, 3500 ppm of ammonia was produced with an energy efficiency of 1.23 g NH3 kWh−1. Dilution with 2–5 vol% of argon yielded a 2% improvement in the concentration and energy efficiency, which seems insignificant considering the added practical challenges posed by gas separation. To achieve even higher ammonia concentration and energy efficiencies, it is recommended to support transition metal on γ-Al2O3.

Atmospheric Plasma-Assisted Ammonia Synthesis Enhanced Via Synergistic Catalytic Absorption

Ammonia Synthesis Via Nitrogen-Coupled Methane Conversion at Ambient Temperature and Plasma Conditions

Non-thermal Atmospheric Plasma Synthesis of Ammonia in a DBD Reactor Packed with Various Catalysts

Dielectric barrier discharge plasma-assisted catalytic ammonia synthesis: synergistic effect of Ni-MOF-74 catalyst and nanosecond pulsed plasma

Plasma-enabled sustainable ammonia synthesis at atmospheric pressure: the role of catalysts on synergistic effect

Plasma‐Assisted Sustainable Nitrogen‐to‐Ammonia Fixation: Mixed‐phase, Synergistic Processes and Mechanisms

Deciphering the synergy between plasma and catalyst support for ammonia synthesis in a packed dielectric barrier discharge reactor

Direct ammonia synthesis from the air via gliding arc plasma integrated with single atom electrocatalysis

Efficient ammonia synthesis from the air using tandem non-thermal plasma and electrocatalysis at ambient conditions

Sustainable ammonia synthesis from air by the integration of plasma and electrocatalysis techniques

Hydrogenation of Plasma-Excited Nitrogen over an Alumina Catalyst for Ammonia Synthesis

Energy-Efficient Pathways for Pulsed-Plasma-Activated Sustainable Ammonia Synthesis

Advancing Sustainable Ammonia Production via Solventless, Robust, and Thermally Conductive Absorbents

Shielding Protection by Mesoporous Catalysts for Improving Plasma-Catalytic Ambient Ammonia Synthesis

Catalytic Ammonia Formation in a Microreaction Chamber with Electrically Intensified Arc Plasma

Sustainable Ammonia Production Via Nanosecond-Pulsed Plasma Oxidation and Electrocatalytic Reduction

Reinforcement of fluidized catalysts with DBD plasma assisted for green ammonia synthesis

Recent advances in plasma-enabled ammonia synthesis: state-of-the-art, challenges, and outlook

Highly Efficient Ammonia Synthesis by Gas–Liquid Interface Pulsed Discharge Plasma: A Synthesis Method without Hydrogen

Plasmon-Assisted Ammonia Electrosynthesis

Indirect Synthesis System for Ammonia from Nitrogen and Water Using Nonthermal Plasma Under Ambient Conditions