Research Progress of Numerical Simulation in Steelmaking and Continuous Casting Processes
Zhu Miaoyong,Lou Wentao,Wang Weiling
DOI: https://doi.org/10.11900/0412.1961.2017.00430
IF: 1.797
2017-01-01
ACTA METALLURGICA SINICA
Abstract:Because of the complexity of steelmaking and continuous casting processes and their limitation condition for direct measuring and testing,numerical simulation has become an indispensable means to analyze the phenomena and mechanisms occurring in the processes,and since the 1980s,it has made a rapid development.For the converter smelting,some new oxygen lances were designed by using the simulation study of the characteristics of the oxygen lance supersonic jet.Some mathematical models have been established to describe the slag-metal-gas multiphase flow behavior in steelmaking converter,and the flow field,mixing efficiency,metal droplet splashing,lining scouring and other physical phenomena.For the ladle refining,the Euler-Euler model gradually replaces the quasi-unidirectional and Euler-Lagrangian models,and successfully describes the phenomena of bubble turbulent dispersion caused by liquid turbulent fluctuation,and bubble-induced turbulence occurring during bubble floating process.So,some new and important inclusion transport mechanisms and phenomena have been presented.The CFD-PBM model was used to predict successfully the inclusion transport,collision growth and removal behavior in the molten steel,which enriches the inclusions removal theory of ladle refining.The CFD-SRM coupled model was used to accurately describe the slag-metal reaction and desulfurization behavior in a gas-stirred ladle,and the effect of the different content of compositions in synthetic slag and liquid steel,arrangement of bottom blowing tuyeres on the slag-metal reactions and desulfurization efficiency were discussed and clarified.For steel continuous casting,as the heat flow model from the solidified shell to the copper plate of mold was coupled with the thermo/mechanical model of the solidified shell,distributions of mold flux and air gap both along circumference and height directions of the mold were successfully predicted,while founded theoretical backgrounds for designing new mold with inner convex surface and controlling the surface corner crack of micro-alloyed steel.The coupled simulation between flow and electromagnetic fields in mold revealed the flow behavior of molten steel with electromagnetic stirring or braking,the fluctuation characteristic of the slag-steel interface and the distribution characteristic of inclusions in the strand.Based on the volume averaged method,multi-field and multi-phase solidification model successfully clarified the formation mechanism of macro-segregation in continuously cast strand and quantitatively predicted central/centerline segregation indexes in the strand under different casting conditions.In addition,the numerical simulation of the evolution of solidification structure of the continuously cast strand mainly focused on the as-cast grain,and its extension to the dendrite structure needed further more endeavors.Generally speaking,the numerical simulation in steelmaking-continuous casting process is moving towards coupling multi-physical/chemistry phenomena and multi-fields and gradually transits to the microscopic scale.