Abstract:A dynamic gasifier model including slag flow behavior simulation was established to simulate a new type of oxygen-staged gasifier recently developed in China. A reactor network model (RNM) is used to simulate the internal gas-solid reaction zone of the gasifier, in which the reactor is divided into several zones based on the understanding of the flow characteristics in the gasifier, with each zone represented by either a plug-flow reactor or a well-stirred reactor. This space division concept can provide a more reasonable temperature distribution prediction than one-dimensional models, without costing too much computational expense. In addition, a widely accepted slag layer model is used to simulate the time-varying slag accumulation and flow on the wall and the heat transfer process through the wall. Using the developed model, two kinds of oxygen-staged gasifiers were simulated: the refractory wall gasifier and the membrane wall gasifier. The RNM predictions were compared with industrial data and computational fluid dynamics (CFD) model results, and good agreement has been observed. The temperature distribution simulation results also showed that staged oxygen feeding can reduce the temperature near the main burner significantly, therefore extending the lifetime of the burner compared with that of without staged oxygen feed. Dynamic simulation results suggest that the dynamic response of the refractory wall gasifier is much slower than that of the membrane wall gasifier. In the membrane wall gasifier, the dynamic response of the syngas temperature and composition is rather fast compared to that of the wall temperature. However, for the refractory wall gasifier, the dynamic response of syngas temperature is as slow as that of the wall temperature indicating that different control strategies should be taken into account for better slag flow and syngas temperature control for these two kinds of gasifier.

Dynamic Simulation of Gas System in Iron and Steel Complex

The Technology of Gas Balance and Optimal Schedule and Its Applications to Energy-Saving and Emission-Reduction in Petrochemical Plant

An Equivalent Model of Gas Networks for Dynamic Analysis of Gas-Electricity Systems

Balance of the oxygen pipe network and scheduling in iron and steel enterprises

Online Strategy for Scheduling By-Product Gas Consumption and Adjusting Gas Holder Level in Iron and Steel Industry

Simulation Based Approach for Optimal Scheduling of Fuel Gas System in Refinery

Dynamic Modelling And Simulation Of Igcc Process With Texaco Gasifier Using Different Coal

Two-time scale dynamic closed-loop scheduling for gas supply network with multiple air separation units

Research and system design of energy dynamic balance and optimal scheduling of iron and steel enterprises

Dynamic Model for an Oxygen-Staged Slagging Entrained Flow Gasifier

Simulation Study on Heat Transfer Characteristics of Coal Synthesis Gas Installations

Mathematical Simulation on Blast Furnace Operation of Coke Oven Gas Injection in Combination with Top Gas Recycling

Dynamic Modelling and Simulation Study of Texaco Gasifier in an IGCC Process.

A Multi-Level Simulation Platform of Natural Gas Internal Reforming Solid Oxide Fuel Cell–gas Turbine Hybrid Generation System – Part II. Balancing Units Model Library and System Simulation

Optimal Demand Response of a Gas–Steam–Power Systems in Iron and Steel Enterprises Considering Internal Production Constraints

Dynamic Simulation of Post-Combustion Capture System

Dynamic Modeling and Simulation of Shell Gasifier

Dynamic Simulation of Coal Water Slurry Gasifier under Abnormal Operation Conditions

Dynamic Scheduling System of Human-Computer Interaction for Steelmaking-Continuous Casting Process Based on Gantt Chart and Optimization Model

Numerical simulation and optimization of the multi-stage air/gas supply system in a coke oven battery with 7.1 m coking chambers

Dynamic Simulation Analysis and Optimization of Green Ammonia Production Process under Transition State