Abstract:Selective transformation of CO2 into biodegradable polycarbonates (CO2-based copolymers) by the alternating copolymerization with epoxides represents a most promising green polymerization process. Despite the tremendous progress this field has made, most of the CO2-based polycarbonates are known to be amorphous, and their low thermal resistance makes them difficult to use as structural materials. Herein, we report the selective synthesis of highly isotactic CO2 copolymers from meso-3,5-dioxaepoxides in perfectly alternating nature by the enantiopure dinuclear Co(III)-complex-mediated desymmetrization copolymerization under mild conditions. These isotactic CO2-based polycarbonates are typical semicrystalline polymers, possessing melting points (T-m) of 179-257 degrees C, dependent on the substitute groups at 4-position of the meso-epoxides. As a model monomer of 3,5-dioxa-epoxides, 4,4-dimethyl-3,5,8-trioxabicyclo[5.1.0]octane (CXO) was studied in detail in the asymmetric copolymerization with CO2. The isotactic CO2/CXO copolymer (PCXC) with >99% enantioselectivity possesses a high T-m of 242 degrees C and a decomposition temperature of 320 degrees C, while its atactic copolymer has a high T-g of up to 140 degrees C. Moreover, the acid hydrolysis of highly isotactic PCXC was performed to provide stereoregular poly(1,2-bis(hydroxymethyl)ethylene carbonate)s (PCFC) with two hydroxyl groups in a carbonate unit, which showed a remarkable decrease of 80 degrees C in thermal decomposition temperature. This hydroxyl-functionalized CO2 copolymer accords with an unmet need for a readily degradable biocompatible polycarbonate and was further explored to prepare bush copolymers for biomedical and pharmaceutical applications. This approach was initially demonstrated by the hydroxyl groups appended in polycarbonate backbone of a hydroxyl-functionalized terpolymer serving as macroinitiators for direct graft polymerization via organocatalytic lactide ring-opening polymerization to give fully degradable brush polymers with polycarbonate backbones and polylactide side chains. Furthermore, enantiopure dinuclear Co(III)-complex-mediated asymmetric terpolymerization of CO2 with CXO and cyclohexene oxide (CHO) at various feed ratios was carried out in toluene solution, affording optically active terpolymers poly(CHC-co-CXC) with highly enantioselective ring-opening of the both meso-epoxides. These stereospecific terpolymers were found to be crystallizable and their crystallization capacity could be tuned by changing the feed ratio of the epoxides.

High-Efficiency Construction of CO2-Based Healable Thermoplastic Elastomers Via a Tandem Synthetic Strategy

Highly Elastic and Degradable Thermoset Elastomers from CO2-based Polycarbonates and Bioderived Polyesters

High-Performance Olefin Thermoplastic Elastomer Based on Dynamically Cross-Linking Crystalline Macromers and Elastic Backbones

Preparation Of Comb-Shaped Polyolefin Elastomers Having Ethylene/1-Octene Copolymer Backbone And Long Chain Polyethylene Branches Via A Tandem Metallocene Catalyst System

Toughening CO2 -Derived Copolymer Elastomers Through Ionomer Networking

Construction of Autonomic Self-Healing CO2-Based Polycarbonates Via One-Pot Tandem Synthetic Strategy

CO2 Derived ABA Triblock All-Polycarbonate Thermoplastic Elastomer with Ultra-High Elastic Recovery

Controlled Carbon Dioxide Terpolymerizations to Deliver Toughened yet Recyclable Thermoplastics

Random Terpolymer of Carbon Dioxide, Butadiene and Epoxides: Synthesis, Functionalization and Degradability

Metal-Free Synthesis of Biodegradable CO2-Based Oligo(carbonate-ester) Diols As Building Blocks for Thermoplastic Polyurethanes

Branched Polytetrahydrofuran and Poly(tetrahydrofuran‐co‐ε‐caprolactone) Synthesized by Janus Polymerization: A Novel Self‐Healing Material

Self-Healable, Transparent, Biodegradable, and Shape Memorable Polyurethanes Derived from Carbon Dioxide-Based Diols

New Kind of Thermoplastic Polyurea Elastomers Synthesized from CO 2 and with Self-Healing Properties

Stereospecific CO2 Copolymers from 3,5-Dioxaepoxides: Crystallization and Functionallization

Chemical Synthesis of CO2-Based Polymers with Enhanced Thermal Stability and Unexpected Recyclability from Biosourced Monomers

Construction of CO2‐based thermoplastic elastomer via combining aliphatic polycarbonate and polyamide: A multiblock copolymer PPC‐mb‐PA6

Self-Healable, Strong, and Tough Polyurethane Elastomer Enabled by Carbamate-Containing Chain Extenders Derived from Ethyl Carbonate

Tailored Modular Assembly Derived Self-Healing Polythioureas with Largely Tunable Properties Covering Plastics, Elastomers and Fibers.

Sustainable Polycaprolactone Polyol-Based Thermoplastic Poly(ester ester) Elastomers Showing Superior Mechanical Properties and Biodegradability

Self-Healable and Tough Thermoplastic Materials from Metal-Thioether Block Polymers

Preparation and Characterization of High Melt Strength Thermoplastic Polyester Elastomer with Different Topological Structure Using a Two-Step Functional Group Reaction