Abstract:Heat-treatment processes to obtain carbide-free upper bainite, low bainite and low-temperature bainite in the 34MnSiCrAlNiMo medium-carbon steel were explored. Results show that in the steel bainite transformation mainly goes through three stages: short incubation, explosive nucleation and slow growth. When transformation temperature, T > Ms + 75 degrees C, upper bainite consisted of catenary bainitic ferrite and blocky retained austenite is obtained in the steel. When Ms + 10 degrees C < T < Ms + 75 degrees C, lower bainite is the main morphology composed of lath-like bainitic ferrite and flake-like retained austenite. When T < Ms + 10 degrees C, the lower bainite, also known as low-temperature bainite, is obtained, which contains much thinner lath-like bainitic ferrite and film-like retained austenite. Mechanical testing results show that the lower the transformation temperature is, the better comprehensive performance is. The low-temperature bainite has the very high tensile strength and impact toughness simultaneously. The lower bainite has lower tensile strength and higher impact toughness. The upper bainite has higher tensile strength and lower impact toughness. The big difference of the mechanical performance between these kinds of bainite is mainly caused by interface morphology, size, and phase interface structure of the bainitic ferrite and the retained austenite. Additionally, when the bainite transformation temperature is decreased, the high-angle misorientation fraction in packets of bainite ferrite plates is increased. High-angle misorientation between phase interfaces can prevent crack propagation, and thus improves impact toughness. (C) 2014 Elsevier Ltd. All rights reserved.

Acceleration of Bainitic Transformation by Introducing AlN in Medium Carbon Steel

In Situ Observation of the Effect of AIN Particles on Bainitic Transformation in a Carbide-Free Medium Carbon Steel

Acceleration of Bainitic Transformation Through Chemical Patterning of Austenite

Martensitic Transformation Induced Planar Deformation of AlN Nanoprecipitates in High Nitrogen Stainless Steels

Notably Accelerated Nano-Bainite Transformation via Increasing Undissolved Carbides Content on GCr15Si1Mo Bearing Steel

Preparation Of Nanostructured Bainite In Medium-Carbon Alloy Steel

Acceleration of the Super Bainite Transformation Through A Coarse Austenite Grain Size

N Rich Nanocrystalline Bainite in Surface Layer of Carbon Steel

Carbide-Free Bainite in Medium Carbon Steel

The Effect of Preexisting VC Carbides on the Bainite Transformation in Medium-Carbon High-Alloy Steel

Accelerating Nano-Bainite Transformation Based on a New Constructed Microstructural Predicting Model

N-induced Microstructure Refinement and Toughness Improvement in the Coarse Grain Heat-Affected Zone of a Low Carbon Mo–V–Ti–B Steel Subjected to a High Heat Input Welding Thermal Cycle

Influence of Co and Al on Bainitic Transformation in Super Bainitic Steels

Accelerated Isothermal Phase Transformation and Enhanced Mechanical Properties of Railway Wheel Steel: The Significant Role of Pre‐Existing Bainite

Effect of Ausforming on the Bainitic Transformation and Microstructure in Medium Carbon V–N Micro-Alloyed Steel

Effects of Alloying Element on Bainitic Transformation in Fe-0.3N Alloy

Mechanism of BN-Promoting Acicular Ferrite Nucleation to Improve Heat-Affected Zone Toughness of V-N-Ti Microalloyed Offshore Steel

Study on the Influence of Pre-Formed Phase on Accelerating Bainitic Transformation

Effects of Niobium Microalloying on the Transformation Kinetics, Microstructure, and Mechanical Properties of Medium-Carbon Ultra-fine Bainitic Steel

Influence of Aluminium Content on Carburization Dynamics and Kinetics of Bainite Transformation in Steel

Recent progress: bainite transformation in steels