Abstract:with the increase of regeneration temperature, the compositions of residual coke on the catalyst change from pyrene and phenanthrene to naphthalene;The appearance of nitrogen oxide compounds during steam regeneration makes the regeneration temperature not too high.We derive the kinetics of steam regeneration and obtain an activation energy of about 177.8 kJ/mol during the steam regeneration process.Compared with the air combustion process, the steam regeneration process is more difficult to occur.Methanol-to-olefins (MTO) is industrially applied to produce ethylene and propylene using methanol converted from coal, synthetic gas, and biomass. SAPO-34 zeolites, as the most efficient catalyst in MTO process, are subject to the rapid deactivation due to coke deposition. Recent work shows that steam regeneration can provide advantages such as low carbon dioxide emission and enhanced light olefins yield in MTO process, compared to that by air regeneration. A kinetic study on the steam regeneration of spent SAPO-34 catalyst has been carried out in this work. In doing so, we first investigated the effect of temperature on the regeneration performance by monitoring the crystal structure, acidity, residual coke properties and other structural parameters. The results show that with the increase of regeneration temperature, the compositions of residual coke on the catalyst change from pyrene and phenanthrene to naphthalene, which are normally considered as active hydrocarbon pool species in MTO reaction. However, when the regeneration temperature is too high, nitrogen oxides can be found in the residual coke. Meanwhile, as the regeneration temperature increases, the quantity of residual coke reduces and the acidity, BET surface area and pore structure of the regenerated samples can be better recovered, resulting in prolonging catalyst lifetime. We have further derived the kinetics of steam regeneration, and obtained an activation energy of about 177.8 kJ·mol−1. Compared that with air regeneration, the activation energy of steam regeneration is higher, indicating that the steam regeneration process is more difficult to occur.© 2020 The Chemical Industry and Engineering Society of China, and Chemical Industry Press Co., Ltd.. All rights reserved.

Partial Regeneration of the Spent SAPO-34 Catalyst in the Methanol-to-Olefins Process Via Steam Gasification

Simulation of Fluidized Bed Reactor for Methanol to Olefins(MTO)Process

Simulation of multi-fluidized-bed in series for methanol to olefins

Characteristics of Coke Deposition over A Sapo-34 Catalyst in the Methanol-To-Olefins Reaction

Kinetics of steam regeneration of SAPO-34 zeolite catalyst in methanol-to-olefins (MTO) process

Modeling and Analysis of Air Combustion and Steam Regeneration in Methanol to Olefins Processes

Directed transforming of coke to active intermediates in methanol-to-olefins catalyst to boost light olefins selectivity

Development and application of energy-saving process for methanol to olefins

Preparation of Fe@Si/S-34 Catalysts and Its Catalytic Performance for Syngas to Olefins

Catalytic and deactivated behavior of SAPO-34/ZSM-5 composite molecular sieve synthesized by in-situ two-step method

Stabilizing the framework of SAPO-34 zeolite toward long-term methanol-to-olefins conversion

Effect of Alkene Co-Feed on the MTO Reactions over SAPO-34

Methanol to Olefins (MTO) Reaction over SAPO-34 Catalyst——Deactivation Kinetics of Catalytic Reaction

Recent Progress in Methanol‐to‐Olefins (MTO) Catalysts

Reaction-Regeneration Process of Methanol-to-Light Olefins in Fluidized Bed

Synthesis, characterization and catalytic performance of SAPO-34 molecular sieves for methanol-to-olefin (MTO) reaction

TGA-MS study oncracking of the coke deposited on catalyst for MTO Reaction

Kinetic Study on Air Regeneration of Industrial Methanol-to-Olefin Catalyst

Controlled regeneration of ZSM-5 catalysts in the combined oxygen and steam atmosphere used for catalytic pyrolysis of biomass-derivates

Coking and decoking chemistry for resource utilization of polycyclic aromatic hydrocarbons (PAHs) and low-carbon process

Understanding the Early Stages of the Methanol-to-Olefin Conversion on H-SAPO-34