Abstract:Capacitance deionization technology differs from traditional demineralization technology; its desalination effect depends mainly on the electrode material. The material surface area, pore size, conductivity, and hydrophilicity affect the capacitance deionization performance. Here, various ethyleneamine-functionalized graphene oxide nanocomposites were synthesized by a simple "one-pot" organic reaction. The nitrogen atom of the ethyleneamine can improve the adsorption performance owing to the interfacial interaction between lone pair electrons and salt ions, and NH2 groups can react with the oxygen-containing group of graphene oxide to generate a stable porous nanostructure. The capacitance deionization device that is based on triethyltetramine-modified graphene oxide (TETA-mGO) exhibits an excellent specific capacitance (104.13 F/g) and salt electrosorption capacity (9.50 mg/g) at 1.6 V. To enhance the deionization performance and reduce the cost, activated carbon was introduced to couple with TETA-mGO to construct a composite electrode (AC/TETA-mGO) with a reasonable ratio of TETA-mGO and activated carbon. Among them, the novel AC/TETA-mGO-10% composite exhibits a superior electrochemical performance with an improved specific capacitance of 147.29F/g. In addition, AC/ TETA-mGO-10% also exhibited excellent salt adsorption capacity (15.17 mg/g) in a low concentration of NaCl solution. These results demonstrate that ethyleneamine-functionalized graphene oxide can improve the electroadsorption performance, and similarly the coupling of activated carbon and TETA-mGO shows potential as an advanced, inexpensive electrode material for capacitive-deionization application.

Selective Removal of Nitrate Ion Using a Novel Activated Carbon Composite Carbon Electrode in Capacitive Deionization

Novel Composite Electrodes for Selective Removal of Sulfate by the Capacitive Deionization Process.

Preparation of nitrogen-doped hierarchical porous carbon electrodes for high performance capacitive deionization

Desalination by Capacitive Deionization Process Using Nitric Acid-Modified Activated Carbon As the Electrodes

Covalently-bonded Quaternized Activated Carbon for Selective Removal of NO3– in Capacitive Deionization

A study of electrosorption selectivity of anions by activated carbon electrodes in capacitive deionization

Selective removal of Na+ by NaTi2(PO4)3-MWCNT composite hollow-fiber membrane electrode in capacitive deionization

ZnFe2O4-infused Hierarchically Porous Carbon Nanofiber Electrode for Enhanced Capacitive Deionization

Coal-based Activated Carbon Functionalized with Anionic and Cationic Surfactants for Asymmetric Capacitive Deionization of Nitrate

Resin-enhanced Rolling Activated Carbon Electrode for Efficient Capacitive Deionization

ZnFe 2 O 4 -infused hierarchically porous carbon nanofiber electrode for enhanced capacitive deionization

Cation-exchange Fibers and Silver Nanoparticles-Modified Carbon Electrodes for Selective Removal of Hardness Ions and Simultaneous Deactivation of Microorganisms in Capacitive Deionization.

Porous NaTi2(PO4) 3 Nanoparticles Encapsulated in Nitrogen-Doped Carbon Matrix for High-Performance Capacitive Deionization

Significantly Enhanced Capacitance Deionization Performance by Coupling Activated Carbon with Triethyltetramine-Functionalized Graphene

Comparative Investigation of Activated Carbon Electrode and a Novel Activated Carbon/Graphene Oxide Composite Electrode for an Enhanced Capacitive Deionization

Efficient nitrate removal by nitrogen-doped carbon spheres electrodes with interconnected architecture in novel stirring capacitive deionization: Dual promoting effect of facile mass transfer and additional active centers

Ion selective electrosorption by two pseudocapacitive intercalating nanocomposite electrodes

Enhanced Selective Electrosorption of Nitrate from Wastewater by Controllably Doping Nitrogen into Porous Carbon with Micropores.

Chemical Modification of Carbon Particles to Enhance the Electrosorption of Capacitive Deionization Process

Selective Ammonium Removal from Synthetic Wastewater by Flow-Electrode Capacitive Deionization Using a Novel K2Ti2O5-Activated Carbon Mixture Electrode.

Electrosorption of different cations and anions with membrane capacitive deionization based on carbon nanotube/nanofiber electrodes and ion-exchange membranes