Abstract:When subjected to high temperatures, cement-based materials can dehydrate, which, in turn, affects the mechanical property of the main binding phase (calcium silicate hydrate) at the atomic scale. However, the effects of high temperature on the tensile and compressive behavior of calcium silicate hydrate (C−S−H) grains under uniaxial loading remains poorly understood. In this work, based on reactive molecular simulations, the tensile strength, compressive strength, and stress-strain relations of C−S−H grains with four calcium/silicon (C/S) ratios (1.10, 1.33, 164, and 1.80) both under and after (residual properties) high temperatures are investigated. It is shown that C−S−H grains can shrink due to the water loss induced by high temperature, and a low C/S ratio can lead to a thermo-stable molecular structure. Meanwhile, the residual tensile strength can be enhanced, particularly the tensile strength in the z-direction. Upon the residual compressive strength, in the x and y directions, high temperature can decrease the residual compressive strength for C/S = 1.10 or 1.33 but has no apparent effect for C/S = 1.64 or 1.80. While in the z-direction, the residual compressive strength can be enhanced due to the reduction in the interlayer space. In addition, high temperature can improve the residual tensile ductility but has no obvious effect on the residual compressive stress-strain relations. As for the mechanical properties under high temperature, both the tensile and compressive strengths can be weakened except that the tensile strength in the z-direction can undergo an increasing trend when the temperature is below 800 K due to significant shrinkage in the z-direction. Moreover, high temperature can make stress-strain curves exhibit good plasticity. Discussion indicates that the strength degradation of C−S−H gels or cement paste exposure to high temperatures is likely caused by the increasing porosity and coarsening of the void or defect size.

Microstructure and Phase Transformation of Graphene-Cement Composites under High Temperature

Microstructure and Mechanical Performance of Graphene Reinforced Cementitious Composites

The effect of temperature on mechanical properties of calcium silicate hydrate enhanced by graphene oxide and graphene via molecular simulation study

Mechanical Properties and Microstructures of Steel-basalt Hybrid Fibers Reinforced Cement-based Composites Exposed to High Temperatures

Correlation Between Macroscopic Properties and Microscopic Pore Structure in Steel-Basalt Hybrid Fibers Reinforced Cementitious Composites Subjected to Elevated Temperatures

Effect of High Temperature on Compressive Strength and Microstructure of Cement Paste Modified by Micro- and Nano-calcium Carbonate Particles

Microstructural study of concrete performance after exposure to elevated temperatures via considering C–S–H nanostructure changes

Investigation on physicochemical and piezoresistive properties of smart MWCNT/cementitious composite exposed to elevated temperatures

Microstructure and Mechanical Properties of High-Toughness Fiber-Reinforced Cementitious Composites after Exposure to Elevated Temperatures

Thermal Stability of Graphene in Inert Atmosphere at High Temperature

Performance of carbon nanomaterials incorporated with concrete exposed to high temperature

Effects of high-temperature heat treatment on the microstructure and mechanical performance of hybrid Cf-SiCf-(Al2O3p) reinforced geopolymer composites

Tensile Microcracking Behavior of Granites after High Temperature Treatment by Considering the Effect of Grain Size and Mineralogical Composition

The Phase Behavior Changes of Black Talc at High Temperature and Performance of its Ceramic Composite Materials

Graphite-reinforced Portland cement composites at alternate ultra-high temperatures

Influence of elevated temperature on the microstructures and mechanical properties of cement-based mortar with sands and refractory materials

In situ processing of MWCNTs/leucite composites through geopolymer precursor

Effect of micro‐structural changes on concrete properties at elevated temperature: Current knowledge and outlook

Effects of high temperature on the mechanical behavior of calcium silicate hydrate under uniaxial tension and compression

Uniaxial Tensile Behavior, Flexural Properties, Empirical Calculation and Microstructure of Multi-Scale Fiber Reinforced Cement-Based Material at Elevated Temperature

Influence of Elevated Temperature Treatment on the Microstructures and Mechanical Properties of Carbon Fibers in Argon Environment