Abstract:During the fault current breaking process of a mechanical direct current vacuum circuit breaker (DC VCB) with double-break (DB), the mechanism’s dispersion can result in a gap difference between the two breaks. A DB DC VCB breaking experiment platform is constructed in order to investigate the impact of gap difference on plasma distribution during the DB DC VCB breaking process. During the experiment, a high-speed camera is used to capture the vacuum arcing process at the two breaks under varying gap difference conditions. Then, the arc feature parameters and their variations during the zero-zone process are extracted using image processing techniques, and the distribution patterns of plasma and arc energy at the two breaks are analyzed and compared. When there is no gap difference between the two breaks of the experimental DB DC VCB, there are no significant differences in arc energy and the sizes of high-, medium-, and low-temperature plasma zones between the two breaks. When there is a gap difference between two breaks, the break with the smaller gap has larger high and medium-temperature plasma zones, more concentrated arc energy, higher particle concentration, lower arc diffusion velocity and arc energy decay velocity, and a greater amount of residual plasma after the extinguishing of the arc. When the gap difference exceeds a certain threshold, energy spots appear on the contact surfaces, and a high concentration corridor of residual particles remains between the contacts after the current crosses zero, forming a breakdown weak point that eventually leads to arc re-ignition (hence interruption failure) under the action of transient recovery voltage.

Influence of Grading Capacitances on the Lightning Impulse Breakdown Voltage of a Double-Break Vacuum Circuit Breaker

Influence of Dynamic Charge Compensation on Voltage Distribution of Double-Break Vacuum Circuit Breakers

Experimental Investigation Into the Synergy of Vacuum Circuit Breaker With Double-Break

Electrical Performance Design for Circuit Breakers Based on Multi-domain Sequential Coupling

Experimental Investigation of the Prestrike Characteristics of a Double-Break Vacuum Circuit Breaker under DC Voltages

Interdependence of Pressure and Shield Potential in Interrupter of Vacuum Circuit Breaker

Lightening Impulse Breakdown of Vacuum Gaps in Series—Part II: Bridging Resistor

Study on impact of gap difference on plasma distribution of direct current vacuum circuit breaker with double-break

Design and Verification of an Ultra-high Voltage Multiple-break Fast Vacuum Circuit Breaker

A New Measurement Method of Contact Conditions in a Vacuum Circuit Breaker With the Field Emission Current During the Closing Operation

Research on the Influence of Current Limiter Based on Highly Coupled Split Reactor on Main Circuit Breaker Overvoltage

A Fast LVDC Vacuum Hybrid Circuit Breaker: Dielectric Recovery and Design Consideration

On the Relationship Between Internal Pressure and Permittivity in the Interrupter of VCB

Development of High-Voltage Vacuum Circuit Breakers in China

A Double-Break Current Injection Vacuum DCCB: Principle and Analysis

Investigation of Arc Characteristics of a DC Vacuum Circuit Breaker With Double-Break Under Asynchronous Interrupting

Lightening Impulse Breakdown of Vacuum Gaps in Series—Part I: Partial Breakdown

Breakdown voltage characteristics of combined air gaps under negative lightning impulse

Prediction Method of the Breakdown Probability for Multiple Vacuum Gaps in Series Considering Dielectric Recovery under a Lightning Impulse Voltage

Study on Impulse Breakdown Characteristics of Internal-Gap Lightning Protection Device Applied to 35 kV Distribution Line

Experiment and Simulation of Air Gap Breakdown Characteristics Under Short-tail Impulse Waveform