Abstract:The calcium looping (CaL) process is a promising CO2 capture technology, which uses CaO-based sorbents by employing a reversible reaction between CaO and CO2 generally named carbonation and calcination for each direction of the reaction. Although CaO-based sorbents possess many advantages, including wide availability, relatively low cost, and high theoretical CO(2 )uptake (similar to 0.786 g of CO2/g of CaO), it mainly suffers from a rapid decline in CO(2 )capture performance during cyclic operation, which has remained an urgent issue required to be addressed for industrial applications of the CaL process. Extensive studies have been conducted thus far, attempting to prevent and/or alleviate the rapid performance decay of the sorbents. Thus, this paper reviews the recent development of the CaL process worldwide with an emphasis on its development in China, mainly focusing on the advancement in the design and reinforcement of CaO-based sorbents. These activation strategies mainly include doping, chemical pretreatment, incorporation of supports with high Tammann temperatures, and structural modification, which do enhance the cyclic performance of the sorbents. However, some challenges still exist in the development of the CaO-based sorbents, such as the cost of the synthesis route, the scale-up pathways of the sorbents, the assessment of cyclic performance under mild conditions, and the ignorance of mechanical strength and attrition resistance of the sorbents. Therefore, life cycle assessment together with techno-economic analysis is essential when synthesizing CaO-based sorbents. In addition, more work should be conducted under industrially relevant conditions in fluidized bed reactors and even pilot-scale reactors, which are much closer to industrial situations. In this case, mechanical strength and attrition resistance are also assessed during cyclic operation.

Novel Method for Regeneration/reactivation of Spent Dolomite-Based Sorbents from Calcium Looping Cycles

Mechanism for self-reactivation of nano-CaO-based CO 2 sorbent in calcium looping

Regenerable MgO-based Sorbents for CO2 Capture at Elevated Temperature and Pressure: Experimental and DFT Study

Steam Hydration Reactivation of Cao-Based Sorbent in Cyclic Carbonation/Calcination for Co2 Capture

Reactivation of calcium-based sorbent by water hydration for CO2 capture

In-situ XRD Studies of dolomite based CO2 sorbents

Cyclic Performance Of Waste-Derived Sio2 Stabilized, Cao-Based Sorbents For Fast Co2 Capture

Developing a Novel CaO-Based Sorbent for Promoted CO2 Capture and Tar Reduction

A green and scalable synthesis of highly stable Ca-based sorbents for CO2 capture

Calcium Looping Technology Using Improved Stability Nanostructured Sorbent For Cyclic Co2 Capture

Degradation Study of a Novel Polymorphic Sorbent under Realistic Post-Combustion Conditions

Reactivity and Microstructure of Synthetic CaO-based Sorbents for CO2 Capture

Review on the development of sorbents for calcium looping

CO2 Capture from Flue Gases Using Three Ca-Based Sorbents in a Fluidized Bed Reactor

Development of CaO-based Sorbent Doped with Mineral Rejects–bauxite-Tailings in Cyclic CO2 Capture

Hydration Reactivation of CaO-Based Sorbent for Cyclic Calcination-Carbonation Reactions

Research on the Preparation of CO2 Renewable Sorbent from Calcium-Based Waste: Towards Enhanced Biomass Gasification for H2 Production

Experimental research and modeling of multiple carbonation/calcination cycle of Ca-based CO2 sorbents

Development and performance of CaO/La2O3 sorbents during calcium looping cycles for CO2 capture

Performance of Coal Fly Ash Stabilized, CaO-based Sorbents under Different Carbonation–Calcination Conditions

Studies on CO2 uptake by CaO/Ca3Al2O6 sorbent in calcium looping cycles