Abstract:A series of experiments has been conducted to investigate the tribological properties of a TiN film sliding against GCr15 steel balls in ambient air, low vacuum and high vacuum environments. Various friction loads and sliding velocities were also applied. The TiN film displays a steady-state friction stage after the running-in stage in all the above environments, while the durations of running-in stages are different. The steady-state friction coefficients of the TiN film were around 0.56 in ambient air and 0.3 in the high vacuum environment (1 × 10−5 mbar). In the low vacuum (1 × 10−2 mbar) environment, a low friction coefficient (around 0.19) was attained for all the friction tests on TiN film, irrespective of the applied load and sliding velocity. In the meantime, it was noticed that the applied loads and the sliding velocities would change the duration of the running-in stage before reaching the low friction coefficient. It is revealed by the analysis of wear tracks that the metal oxides induced by the tribo-chemical effect at the friction interface play an important role in affecting the tribological behaviors of the TiN films in different environments. The Raman results show that the main component of the metal oxides is hematite (α-Fe2O3), and the amount of iron oxide is related to the friction environment. The composition and quantity of iron oxides produced by the interfacial tribo-chemical effect affect the tribological behavior. The results also show that the mechanical wear process at the friction interface displays a polishing effect, which would reduce the surface roughness. The mechanical wear performance varies under different loads and velocities. The tribological tests results indicate that the interfacial tribo-chemical effect and mechanical wear process should be considered together rather than individually to interpret the tribological behaviors of TiN films in different environments.

The Effect of Tribo-Chemical Reactions of Mating Materials on Tribological Behaviors of the B4C Film in Various Relative Humidity Environments

TRIBOLOGICAL INVESTIGATION OF BORON CARBIDE FILMS SLIDING AGAINST DIFFERENT MATING MATERIALS UNDER HIGH RELATIVE HUMIDITY

Comparative Studies of the Tribological Behaviors and Tribo-Chemical Mechanisms for AlMgB14-TiB2 Coatings and B4C Coatings Lubricated with Molybdenum Dialkyl-Dithiocarbamate

Tribo-oxidation and Tribological Behaviour of ZrB2-20%volSiC Composites Coupled with WC and Al2O3 at High Temperatures

Effect of Substrates Characteristics on Tribological Behaviors of AlTiN-Based Coated WC–Co Cemented Carbides

Corrosion and tribological investigations of the B<sub>4</sub>C coatings rubbing against SiC ball for high relative humidity engineering application

Tribological Performances of the Boron Carbide Coatings Sliding Against Silicon Carbide and Silicon Nitride Balls under Various Relative Humidity Conditions

Influence of Interfacial Tribo-Chemical and Mechanical Effect on Tribological Behaviors of TiN Film in Different Environments

Influences of Velocity, Load and Counterpart Material on the Tribological Behavior of ZrB2-SiC Composites

Influences of ceramic mating balls on the tribological properties of Cr/a-C coatings with low chromium content in water lubrication

Dry Sliding Tribological Properties of Self-Mated Couples of B4C-hBN Ceramic Composites

Evaluation of Tribological Behavior of B4C–hBN Ceramic Composites under Water-Lubricated Condition

Friction and Wear Behaviors of Different DLC Films Sliding Against SiC and Si3N4 Balls under High Relative Humidity

Effects of Tribo-Film on Wear Resistance of Additive Manufactured Cobalt-Based Alloys During the Sliding Process

Influences of Hbn Content and Test Mode on Dry Sliding Tribological Characteristics of B4C-hBN Ceramics Against Bearing Steel

Effect of V Doping on the High Temperature Tribological Properties of (ti1−xvx)3alc2 Solid Solutions Sliding Against Different Counterparts

Tribological behaviors of Mo2BC ceramics against various counterpart materials

The Tribological Performances of the Boron Carbide Films Tested under Wet Air and Wet N2 Conditions

The effect of tribofilm formation on the tribological characteristics of ceramic-cast iron sliding pairs

Influence of Tribofilm on Superlubricity of Highly-Hydrogenated Amorphous Carbon Films in Inert Gaseous Environments

Tribological Performance of Self-Matching Pairs of B4C/hBN Composite Ceramics under Different Frictional Loads