Abstract:A reflective linear-to-circular polarization converter based on dual frequency-selective structures (FSSs) is proposed and modeled to exhibit efficient wideband performance. The design utilizes a diagonal array of two connected circular patches as an effective anisotropy with regular current distribution in several successive resonances, resulting in orthogonal reflections with a 90° phase difference. The relevant upper-part characteristic is improved by using two separate square patches as a high-frequency resonator. This design with distinct key parameters leads to high overlapping and then excellent bandwidth and efficiency over 105% and 96%, respectively, with an axial ratio below 1.7 dB. A sophisticated equivalent circuit-admittance model including effective mutual coupling between two FSSs is extracted, featuring closed-form equations for the physical design. Different dielectric constants are studied on the converter, which offer controllable coverage in the range of 3–24 GHz (S, C, X, Ku, and K bands), variably. For actual validation, a very thin (0.04λ 0 at 3.65 GHz) 8 × 8 array prototype was built and measured at different incident angles, showing angular stability up to 45° in 78% (6–14 GHz) bandwidth. This converter has potential applications in communication, spectroscopy, detection, and imaging in micro-, mm-, and THz-wave regions.

140 GHz linear to circular polarization convertor based on modified cross slot frequency selective surface with high selectivity

A Multi-functional Frequency Selective Polarization Converter Based on Substrate Integrated Waveguide Cavities

Bandpass Frequency Selective Surface with Two Sharp Sidebands Based on Shunted Quarter‐mode Substrate Integrated Waveguide Cavities

A Bandpass Frequency Selective Surface With a Low Cross-Polarization Based on Cavities With a Hybrid Boundary

140 GHz Frequency Selective Surface Based on Hexagon Substrate Integrated Waveguide Cavity Using Normal PCB Process

Flexible Rotation of Linear Polarization Conversion with a Frequency Selective Surface.

Wideband and Wide-Angle FSS Using Loop Slotted Hybrid Quarter-Mode Substrate Integrated Cavity With Two Independently Controllable Poles

Filtenna-Filtenna Design for Broadband and High-Selectivity Frequency Selective Surface

High-Selectivity Circularly Polarized Frequency Selective Surface with Ultralow Profile and Continuous Phase Modulation

A circular polarization converter based on in-linked loop antenna frequency selective surface

A Multifuntional Frequency-selective Polarization Converter for broadband backward-scattering reduction

Circular-to-linear Polarization Converter Based on Composite Via-Coupled Patch Frequency Selective Surfaces

A Dual-Band Dual-Polarization Frequency Selective Surface with Wide-Range Flexible Band Ratio and Wide Angular Stability

Linear to Circular Polarization Converter with Third Order Meta-Frequency Selective Surfaces

Single- and Dual-Band High-Order Polarization Rotating Frequency Selective Surface

A Cross-Polarization Converter Using Guided Wave Inspired Metasurface with an In-band Notch and High Frequency Selectivity

A High Power Polarization Converter Based on Rectangular Aperture Frequency Selective Surface

A Novel Miniaturized Multiband Strong Coupled-FSS Structure Insensitive to Almost All Angles and All Polarizations

Wideband design and modeling of efficient multi-resonance reflective linear-to-circular polarization converter

Wide‐angle Band‐pass FSS with High‐frequency Selectivity Based on SIW Cavity Technology

Dual‐polarization 3D FSR with a high selectivity and wide transmission passband