Abstract:Cheap Ni catalysts are highly active for the catalytic conversion of biomass, but it is challenging to prepare Ni-based catalysts with high selectivity and stability under mild conditions. Adjusting the adsorption strength of Ni catalysts to reaction substrates and intermediates by metal introduction is an effective strategy to achieve high yields of products. In this paper, a series of xNi-Al2O3/CN catalysts were prepared by introducing Al content as a variable and were used for hydrogenation of furfural (FAL) to tetrahydrofurfuryl alcohol (THFOL). Under the mild condition of 90 degrees C, the yield of the 3Ni-Al2O3/CN catalyst with the optimal Ni/Al ratio of 3:1 reached 99.9%, which was 8.3 times that of Ni/CN without Al. The improvement in the catalytic performance was mainly attributed to the enhanced interaction of Ni and Al2O3 by Al introduction, which increased the content of active Ni-0 and Lewis acid. This not only promoted the adsorption and activation of H-2 and FAL but also increased the adsorption strength of 3Ni-Al2O3/CN on the intermediate FOL to improve THFOL selectivity. The correlation between the modulation of Al content and catalytic performance was explored in detail through relevant characterization and theoretical calculations. In addition, Al-introduced 3Ni-Al2O3/CN maintained high stability over 10 cycles relative to the rapid deactivation of Ni/CN, which was attributed to the strong interaction of Ni-Al2O3. This strategy to modulate the activation ability of the catalyst provides a reference for the logical design of efficient bifunctional metal catalysts.

Catalytic Transfer Hydrogenation of Bio-Based Furfural with NiO Nanoparticles

Selective Hydrogenation of Furfural to Furfuryl Alcohol Without External Hydrogen over N-doped Carbon Confined Co Catalysts

Formic acid enabled selectivity boosting in transfer hydrogenation of 5-hydroxymethylfurfural to 2,5-furandimethanol on highly dispersed Co-N<sub><i>x</i></sub> sites

Construction of N, O Co-Doped Carbon Anchored with Co Nanoparticles As Efficient Catalyst for Furfural Hydrodeoxygenation in Ethanol

Green and efficient selective hydrogenation of furfural to furfuryl alcohol over hybrid CoOx/Nb2O5 nanocatalyst in water

Ni-Al2O3/CN Nanocatalysts for Selective Hydrogenation of Furfural

Spillover Hydrogen on Electron-Rich Ni/m-TiO2 for Hydrogenation of Furfural to Tetrahydrofurfuryl Alcohol

Efficient and Selective Ni/Al 2 O 3 –C Catalyst Derived from Metal–Organic Frameworks for the Hydrogenation of Furfural to Furfuryl Alcohol

Short Channeled Ni-Co/SBA-15 Catalysts for Highly Selective Hydrogenation of Biomass-Derived Furfural to Tetrahydrofurfuryl Alcohol

Single nickel atoms anchored on porous N-doped nanocarbon with dual reaction sites for highly-efficient transfer hydrogenation of furfural to furfuryl alcohol

Selective Hydrogenation of Furfural to Tetrahydrofurfuryl Alcohol in 2-Butanol over an Equimolar Ni-Cu-Al Catalyst Prepared by the Co-Precipitation Method

Industrially Applicable Aqueous-Phase Selective Hydrogenation of Furfural on an Efficient TiOx-Modified Ni Nanocatalyst

Catalytic Transfer Hydrogenation of Furfural Via Metal-Organic Framework-Derived High Entropy Alloy Catalysts at Room Pressure

Highly Efficient and Selective Hydrogenation of Biomass-Derived Furfural Using Interface-Active Rice Husk-Based Porous Carbon-Supported NiCu Alloy Catalysts

Selective Adsorption and Hydrogenolysis of C-OH Bond in Biomass Derived Furanic Compounds over Ni-TT-Nb2O5

Sulfonate Group Modified Ni Catalyst for Highly Efficient Liquid-Phase Selective Hydrogenation of Bio-Derived Furfural

Insight into the catalytic mechanism of core–shell structured Ni/Ni-N/CN catalyst towards the oxidation of furfural to furancarboxylic acid

Nickel - Titania Supported Catalysts for Direct Selective Hydrodeoxygenation of 5-Hydroxymethylfurfural to 5-Methylfurfural

Theoretical study on the hydrogenation of furfural for furfuryl alcohol production over low Ni modified Cu catalysts

Construction of HfO2 Nanoparticles with Rich Hydroxyl Group for the Efficient Catalytic Transfer Hydrogenation of Furfural

In-situ Constructing Ultrafine NiCo Alloy Confined in LDH Nanoflower for Efficient Selective Hydrogenation of Furfural