Abstract:Magnetic eddy current losses is significant in permanent magnet motors, especially in high-power density permanent magnet motors. It significantly affects the magnet’s temperature and properties and may cause irreversible demagnetization. Several methods for reducing magnetic eddy current losses is proposed to address these problems. First, a field-circuit coupled mathematical model was established to calculate the magnetic eddy current losses. Experiments on the phase current and magnetic eddy current losses verify the accuracy of field-circuit coupled mathematical model. Then based on the model, the effect of the trigger angle, slot opening width, pole arc coefficient, pole arc center offset, and auxiliary slots on the magnetic eddy current losses were assessed. The results showed that the magnetic eddy current loss could be reduced by choosing a suitable leading trigger angle, pole arc coefficient, and pole arc center offset. A smaller slot opening width reduced the eddy current losses. A novel auxiliary slot with an optimized size is proposed to reduce eddy current losses. Finally, taking the trigger angle, slot opening width, pole arc coefficient, pole arc center offset and the auxiliary groove as the optimization factors and the magnetic eddy current loss as the optimization target, the optimal parameter scheme is obtained by Taguchi method. The simulation results show that the optimized magnetic eddy current losses is reduced by 8.57%.

Analysis and Discussion of the Indirect Testing Method for the Losses of Permanent Magnet Synchronous Machines

Analytical Modeling and Analysis of Open-Circuit Magnet Loss in Surface-Mounted Permanent-Magnet Machines

Analytical investigation of open-circuit eddy current loss in windings of PM machines

Simple and accurate analytical estimation of slotting effect on magnet loss in fractional-slot surface-mounted PM machines

A Novel Full Electrical Parameters Estimation Method of Permanent Magnet Linear Synchronous Machines Considering Parameter Asymmetry

Analytical Model for Predicting Magnet Loss of Surface-Mounted Permanent Magnet Machines Accounting for Slotting Effect and Load

Analysis and Reduction of Inherent Shaft Voltage in Interior Permanent Magnet Synchronous Machines

An Accurate No-Load Analytical Model of Flat Linear Permanent Magnet Synchronous Machine Accounting for End Effects

Loss Analysis of Magnet Eddy Current in a High-Power Density Machine Using a Field-Circuit Coupled Model

No-Load Losses Based Method to Detect Demagnetisation Fault in Permanent Magnet Synchronous Motors with Parallel Branches

FEM Analysis and Application of Saturation Effect PMLSM Winding Inductance

Hybrid Analytical Model for Predicting the Electromagnetic Losses in Surface-Mounted Permanent-Magnet Motors

Analytical Calculation of Magnetic Field Distribution and Stator Iron Losses for Surface-Mounted Permanent Magnet Synchronous Machines

Electromagnetic Analysis for Interior Permanent-Magnet Machine Using Hybrid Subdomain Model

Multi-field Coupled Analysis of a Permanent Magnet Synchronous Motor: Application to High Speed Rail Traction

Research on Electromagnetic and Vibration Characteristics of Dynamic Eccentric PMSM Based on Signal Demodulation

The Direct Measurement Method of Magnetic Winding Losses

Analytical Model and Experimental Verification of Permanent Magnet Eddy Current Loss in Permanent Magnet Machines With Nonconcentric Magnetic Poles

3-D analysis of eddy current losses in permanent PMSM magnets

Sensitivity Analysis and Uncertainty Quantification of Thermal Behavior for Permanent Magnet Synchronous Machines

Vibration Analysis and Comparison of Low-Speed Outer Rotor Permanent Magnet Synchronous Machines