Abstract:In this study, home-made amorphous TiO2 microspheres with good mono-dispersity and large numbers of mesopores on the surface were used as substrates. The intermediate microspheres were obtained by adding Co/Ni sources with different Co/Ni molar ratios in a water bath and making them react by water bath heating. By calcining the intermediate microspheres deposited on the TiO2 ones, a core–shell structured spherical CoTiO3/NiTiO3 inorganic composite pigment was prepared. The synthesized pigments were characterized by X-ray diffraction (XRD), Raman spectroscopy, field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectrometry (EDS), laser particle size (LPS) analysis and colorimetry. The results show that when the calcination temperature is 800 °C and the Co/Ni molar ratio is 0.5:0.5, the pigments consist of a TiO2 core and outer ilmenite CoTiO3/NiTiO3 shell. Moreover, the surface of the product microspheres is smooth, and the particles are of regular sphericity with a uniform particle size of about 1.8 μm. The colorimetric analysis from the samples calcined at 800 °C shows color changes from yellow-green to dark green as the Co/Ni molar ratio increases (0.1:0.9 to 0.9:0.1). A Co/Ni molar ratio that is too high or too low results in the formation of by-products such as Co3O4 or NiO, respectively, which adhere to the product surface and affect the chromaticity of the product. This work has enabled the chromatic modulation of yellow-green inorganic pigments, providing a solution for the preparation of spherical inorganic pigments that are more suitable for industrial inkjet printing.

Synthesis of High Near Infrared Reflection Wurtzite Structure Green Pigments Using Co-doped ZnO by Combustion Method

Synthesis and Characterization of Zn1-xCoxO Green Pigments with Low Content Cobalt Oxide

High Near-Infrared Reflective Zn 1– x A x WO 4 Pigments with Various Hues Facilely Fabricated by Tuning Doped Transition Metal Ions (A = Co, Mn, and Fe)

Effective Synthesis of Green Nano‐sized Ceramic Pigments by Co‐doping Zn2+, Cr3+ and Sm3+ into the Cobalt‐aluminate

Synthesis of 1d and Heavily Doped Zn1-Xcoxo Six-Prism Nanorods: Improvement of Blue-Green Emission and Room Temperature Ferromagnetism

High Near-Infrared Reflectance Zn1-xMnxO Yellow Pigment Prepared and Properties by Co-Precipitation Method

Synthesis and Characterization of Zn1-xMnxO Yellow Pigment with High Near-Infrared Reflectance

High near-infrared reflectance Zn 1-x Mn x O yellow pigment prepared and properties by co-precipitation method

High near-infrared reflectance Bi<sub>2</sub>O<sub>3</sub>-ZnO-CaO yellow pigment system

Synthesis of an Intensive Blue Pigment with Low Cobalt Content

Preparation and characterization of inverse spinel green nano-ceramic pigment

Solution combustion synthesis of gray-blue Mn-doped YBO 3 pigments with high NIR reflectance for energy-saving buildings

Preparation and Chromaticity Control of CoTiO3/NiTiO3 Co-Coated TiO2 Composite Pigments

A promising inorganic YFeO3 pigments with high near-infrared reflectance and infrared emission

Synthesis and characterization of novel yellow-green Al-doped Y3Fe5O12 nano-pigments with high NIR reflectance

Synthesis and chromatic properties of V-doped and V/Y-codoped ZrO2 yellow pigments

Structural Coloration Pigments Based on Carbon Modified ZnS@SiO2 Nanospheres with Low-Angle Dependence, High Color Saturation, and Enhanced Stability

Preparation, Chromatic Properties Analysis and Proportioning Optimization of Co-Cr-Fe-Based Black Pigment

Environmentally Friendly High-Near-Infrared Reflectance Blue Pigment YIn 0.9– x Mn 0.1 M x O 3−δ Based on Li/Zn Doping

High Near-Infrared Reflectance Orange Pigments of Fe-Doped La 2 W 2 O 9 : Preparation, Characterization, and Energy Consumption Simulation

Cost-Effective and Efficient Cool Nanopigments Based on Oleic-Acid-Surface-Modified ZnO Nanostructured