Abstract:The employment of atmospheric pressure plasma jets (APPJs) in a large sort of applications is limited by the adversities related to the size of the treated area and the difficulty to reach the target. The use of devices that employ long tubes in their structure has contributed significantly to overcome these challenges. In this work, a comparison between two different plasma systems employing the jet transfer technique is presented. The main difference between the two devices is how the long plastic tube was assembled. The first one uses a copper wire placed inside a long plastic tube. The other device has a metallic mesh installed in a concentric arrangement between two coaxial plastic tubes. As a result, the two APPJ systems exhibit different properties, with the wire assembly being more powerful, also presenting higher values for the electrical current and rotational temperature when compared to the mesh mounting. X-ray photoelectron spectroscopy (XPS) demonstrates that both configurations were capable of inserting O-containing functional groups on the polypropylene (PP) surface. However, the transferred plasma jet with wire assembly was able to add more functional groups on the PP surface. The results from XPS analysis were corroborated with water contact angle measurements (WCA), being that lower WCA values were obtained when the PP surface presented higher amounts of O-containing groups. Surface morphology evaluation showed that the plasma treatment tends to slightly increase the surface roughness of the PP samples with both wire and mesh configurations. Furthermore, the findings in this work suggest that the APPJ with wire configuration is more appropriate for material treatments, while the transferred jet with mesh arrangement tends to present lower electrical current values which makes it more suitable for biological applications.

Influence Of Water Addition On The Modification Of Polyethylene Surface By Nitrogen Atmospheric Pressure Plasma Jet

Insight into the Effect of He Atmospheric Pressure Plasma Jets on Low-Density Polyethylene Surfaces by Fixed-Point Treatment

Comparative Study of Surface Modification of Polyethylene by Parallel-Field and Cross-Field Atmospheric Pressure Plasma Jets

Surface modification of polypropylene non-woven fabric using atmospheric nitrogen dielectric barrier discharge plasma

Investigating the effect of water‐mixing nitrogen atmospheric pressure plasma jet on polyether‐ether‐ketone and time stability under different conditions

Improving surface wettability and adhesion property of polytetrafluoroethylene by atmospheric-pressure ammonia water-mixed plasma treatment

Influence of Pore Size on Penetration of Surface Modification into Woven Fabric Treated with Atmospheric Pressure Plasma Jet

Study on Hydrophilicity of Polymer Surfaces Improved by Plasma Treatment

Surface Modification of Polyethylene (pe) Films Using Dielectric Barrier Discharge Plasma at Atmospheric Pressure

Surface Modification of Polymeric Materials by Plasma Immersion Ion Implantation

Surface modification of a biomedical polyethylene terephthalate (PET) by air plasma

Homogeneous surface hydrophilization on the inner walls of polymer tubes using a flexible atmospheric cold microplasma jet

Simultaneous and Long-Lasting Hydrophilization of Inner and Outer Wall Surfaces of Polytetrafluoroethylene Tubes by Transferring Atmospheric Pressure Plasmas

Different configurations of transferred atmospheric pressure plasma jet and their application to polymer treatment

Effect of atmospheric pressure Argon plasma jet flow on PP film surface modification

Effect of Low Molecular Weight Oxidized Materials and Nitrogen Groups on Adhesive Joints of Polypropylene Treated by a Cold Atmospheric Plasma Jet

Homogeneity study of fluoropolymer films modified by atmospheric pressure nitrogen plasma discharges

Manipulating the Surface Properties of Polyacrylamide with Nitrogen Plasma

Surface energy modification of polyethylene by dielectric barrier discharge (DBD)

Research On Surface Modification Of Polytetrafluoroethylene Coupled With Argon Dielectric Barrier Discharge Plasma Jet Characteristics

Study of Modified Area of Polymer Samples Exposed to a He Atmospheric Pressure Plasma Jet Using Different Treatment Conditions