Abstract:This study was to investigate direct electrolysis of CO2 via solid oxide cells with thin Y0.16Zr0.84O1.92 (YSZ) electrolytes and (La0.8Sr0.2)(0.)95MnO3-delta (LSM)-YSZ air electrodes supported on La0.8Sr0.2Cr0.5Fe0.5O3-delta (LSCrF)YSZ fuel electrodes. The fuel electrode with straight open pores was prepared using the phase-inversion tape casting method, modified with nano-scaled Sr(2)FeLsMn(0)(.5)O(6-delta) (SFM) catalysts using the impregnation method. Substantially larger maximum power densities were observed in the fuel cell mode for single cells with the SFM catalysts than without, e.g., 423 vs. 51 mW.cm(-2) at 800 degrees C. Impedance analysis showed an order magnitude drop in the pure ohmic resistances and the interfacial polarization resistances in the presence of electronically conductive and catalytically active SFM nanoparticulates. Electrolysis measurements indicated that these nanoscaled SFM catalysts also helped to promote CO2 reduction reactions. The electrolysis current densities at 1.5 V were 0.48, 0.64 and 1.02 A.cm(-2) for the SFM-infiltrated cells at 700, 750, 800 degrees C, respectively. In contrast, the blank cells displayed much smaller current densities of 0.22, 0.35 and 0.41 A.cm(-2) under the similar conditions. Apparently, the modification of the LSCrF-YSZ electrode with SFM nanoparticulates provided extended electrochemically active sites with sufficient interconnected paths to transfer electrons and oxygen ions, which led to a significant increase in the electrochemical performance. The reduced polarization resistance and high current density show that the nano-scaled SFM-modified LSCrF-YSZ fuel electrode is highly effective for pure CO2 electrolysis without using the safe gas.

Direct Use of Coke in a Solid Oxide Fuel Cell

Clean and Stable Conversion of Oxygen-Bearing Low-Concentration Coal Mine Gas by Solid Oxide Fuel Cells with an Additional Reforming Layer

Direct methanol oxygen-ion conducting solid oxide fuel cell with an integrated in-situ cracking reactor

Direct liquid methanol-fueled solid oxide fuel cell

Direct Electrolysis of CO2 in Solid Oxide Cells Supported on Ceramic Fuel Electrodes with Straight Open Pores and Coated Catalysts

Direct-Methane Solid Oxide Fuel Cells with Hierarchically Porous Ni-Based Anode Deposited with Nanocatalyst Layer

Modeling of Direct Carbon Solid Oxide Fuel Cell for CO and Electricity Cogeneration

Tubular direct carbon solid oxide fuel cells with molten antimony anode and refueling feasibility

Direct Operation of Solid Oxide Fuel Cells on Low-Concentration Oxygen-Bearing Coal-Bed Methane with High Stability

Solid Oxide Fuel Cells Using Gas Hydrates for Power and Syngas Cogeneration: A Thermodynamic and Experimental Assessment

An efficient and durable solid oxide fuel cell integrated with coal gasification system

On the Catalytic Activity of Ceria for Direct Carbon Conversion in a SOFC

Highly efficient direct carbon solid oxide fuel cells operated with camellia oleifera biomass

Highly efficient, coke-free electrolysis of dry CO 2 in solid oxide electrolysis cells

Direct Carbon Fuel Conversion in a Liquid Antimony Anode Solid Oxide Fuel Cell

A steel slag–derived Boudouard reaction catalyst for improved performance of direct carbon solid oxide fuel cells

Purified High‐sulfur Coal As a Fuel for Direct Carbon Solid Oxide Fuel Cells

Conversion of CO 2 through solid oxide co-electrolysis cell with cobalt-free fuel electrode

A Promising Direct Carbon Fuel Cell Based on the Cathode-Supported Tubular Solid Oxide Fuel Cell Technology

Biomass Carbon Fueled Tubular Solid Oxide Fuel Cells with Molten Antimony Anode

Anode Catalysts for Solid Oxide Fuel Cells That Run Directly on Hydrocarbon Fuels