Abstract:A novel system based on the indirect oxy-combustion of coal in a liquid Sb anode solid oxide fuel cell (SOFC) has been used to produce electricity for over 48 h. Pulverized anthracite was fed to the liquidantimony-anode of the fuel cell, and a peak power density of 47 mW cm(-2) was reached at 1023 K and 35 mW cm(-2) at 973 K. The fuel cell was prepared using a porous stainless-steel tube as a support for an LSM cathode. antimony oxide (Sb2O3)/yittria stabilized zirconia (YSZ, Y(0.08)Z(0.92)O(1.96)) composite electrolyte (membrane), while liquid antimony acted as the anode. Liquid antimony/antimony oxide served as the intermediate medium for coal oxidation producing mainly carbon dioxide, which evolved as a separate gas stream. The fuel cell will facilitate carbon capture process, and simultaneously convert the chemical energy of coal directly to electricity. The experiment showed that while the fabricated electrolyte was porous, it became dense during the actual operation, preventing nitrogen leakage into the Sb/C side and producing reasonable open circuit voltage. Analysis of the experimental EIS data illustrates that the Ohmic resistance was the primary loss mechanism in the system. It further suggests approaches to improve the design. Continuous operation of this coal fueled oxy-combustion/fuel cell system achieved an overall efficiency of 28.2% despite of its tiny scale. Simple technologies can be employed to scale up this system at relatively low cost of fabrication and materials. (C) 2018 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Purified High‐sulfur Coal As a Fuel for Direct Carbon Solid Oxide Fuel Cells

Clean and Stable Conversion of Oxygen-Bearing Low-Concentration Coal Mine Gas by Solid Oxide Fuel Cells with an Additional Reforming Layer

A novel biomass modified brown coal as composite fuel for high performance direct carbon solid oxide fuel cells

Direct Carbon Fuel Conversion in a Liquid Antimony Anode Solid Oxide Fuel Cell

Coal Pretreatment and Ag-infiltrated Anode for High-Performance Hybrid Direct Coal Fuel Cell

Structurally modified coal char as a fuel for solid oxide-based carbon fuel cells with improved performance

Oxy-combustion of Coal in Liquid-Antimony-anode Solid Oxide Fuel Cell System

An efficient and durable solid oxide fuel cell integrated with coal gasification system

A vanadium-doped La0.5Sr0.5FeO3-δ perovskite as a promising anode of direct carbon solid oxide fuel cells for brown coal utilization

Direct Operation of Solid Oxide Fuel Cells on Low-Concentration Oxygen-Bearing Coal-Bed Methane with High Stability

Tubular direct carbon solid oxide fuel cells with molten antimony anode and refueling feasibility

Liquid Antimony Anode Direct Carbon Fuel Cell Fueled with Mass-Produced De-Ash Coal

Preparation and Properties of Direct-Methane Solid Oxide Fuel Cell Based on a Graded Cu-CeO<sub>2</sub>-Ni-YSZ Composite Anode

Research and Development of Solid Oxide Direct Carbon Fuel Cell

Applying high efficiency internal reforming catalyst for direct low concentration coal mine methane solid oxide fuel cells

Performance Characteristics of Liquid Antimony Anode Direct Carbon Fuel Cell

Enhanced conversion efficiency and coking resistance of solid oxide fuel cells with vertical-microchannel anode fueled in CO2 assisted low-concentration coal-bed methane

Effects of Coal Syngas Major Compositions on Ni/Ysz Anode-Supported Solid Oxide Fuel Cells

Core-Shell Structured Li0.33la0.56tio3 Perovskite As A Highly Efficient And Sulfur-Tolerant Anode For Solid-Oxide Fuel Cells

Efficient and Stable Conversion of Oxygen-Bearing Low-Concentration Coal Mine Methane by the Electrochemical Catalysis of SOFC Anode: from Pollutant to Clean Energy

Direct-Methane Solid Oxide Fuel Cells with Hierarchically Porous Ni-Based Anode Deposited with Nanocatalyst Layer