Abstract:Abstract The goal of this work is to predict the effect of part geometry and process parameters on the instantaneous spatiotemporal distribution of temperature, also called the thermal field or temperature history, in metal parts as they are being built layer-by-layer using additive manufacturing (AM) processes. In pursuit of this goal, the objective of this work is to develop and verify a graph theory-based approach for predicting the temperature distribution in metal AM parts. This objective is consequential to overcome the current poor process consistency and part quality in AM. One of the main reasons for poor part quality in metal AM processes is ascribed to the nature of temperature distribution in the part. For instance, steep thermal gradients created in the part during printing leads to defects, such as warping and thermal stress-induced cracking. Existing nonproprietary approaches to predict the temperature distribution in AM parts predominantly use mesh-based finite element analyses that are computationally tortuous—the simulation of a few layers typically requires several hours, if not days. Hence, to alleviate these challenges in metal AM processes, there is a need for efficient computational models to predict the temperature distribution, and thereby guide part design and selection of process parameters instead of expensive empirical testing. Compared with finite element analyses techniques, the proposed mesh-free graph theory-based approach facilitates prediction of the temperature distribution within a few minutes on a desktop computer. To explore these assertions, we conducted the following two studies: (1) comparing the heat diffusion trends predicted using the graph theory approach with finite element analysis, and analytical heat transfer calculations based on Green’s functions for an elementary cuboid geometry which is subjected to an impulse heat input in a certain part of its volume and (2) simulating the laser powder bed fusion metal AM of three-part geometries with (a) Goldak’s moving heat source finite element method, (b) the proposed graph theory approach, and (c) further comparing the thermal trends predicted from the last two approaches with a commercial solution. From the first study, we report that the thermal trends approximated by the graph theory approach are found to be accurate within 5% of the Green’s functions-based analytical solution (in terms of the symmetric mean absolute percentage error). Results from the second study show that the thermal trends predicted for the AM parts using graph theory approach agree with finite element analyses, and the computational time for predicting the temperature distribution was significantly reduced with graph theory. For instance, for one of the AM part geometries studied, the temperature trends were predicted in less than 18 min within 10% error using the graph theory approach compared with over 180 min with finite element analyses. Although this paper is restricted to theoretical development and verification of the graph theory approach, our forthcoming research will focus on experimental validation through in-process thermal measurements.

Investigation of Thermal Responses During Metallic Additive Manufacturing Using a "Tri-Prism" Finite Element Method

Thermo-Mechanical Modeling of Wire-Fed Electron Beam Additive Manufacturing

Integrated Numerical Simulations and Experimental Measurements for the Sintering Process of Injection-Molded Ti-6Al-4V Alloy

The Thermo-Mechanical Coupling Effect in Selective Laser Melting of Aluminum Alloy Powder

Thermal Analysis for Simulation of Metal Additive Manufacturing Process Considering Temperature- and History-Dependent Material Properties

A highly efficient computational approach for part-scale microstructure predictions in Ti-6Al-4V additive manufacturing

Efficient thermal simulation of large-scale metal additive manufacturing using hot element addition

A hybrid finite-element and cellular-automaton framework for modeling 3D microstructure of Ti–6Al–4V alloy during solid–solid phase transformation in additive manufacturing

Resolving thermal gradients and solidification velocities during laser melting of a refractory alloy

Investigation of the thermal behavior during the direct writing metal additive manufacturing

Thermal analysis of fused deposition modeling process based finite element method: Simulation and parametric study

Developing the AM G-code based thermomechanical finite element platform for the analysis of thermal deformation and stress in metal additive manufacturing process

Multi-scale modeling of selective electron beam melting of Ti6Al4V titanium alloy

Influence of AlSi10Mg Particles Microstructure on Heat Conduction During Additive Manufacturing

A novel high-efficient finite element analysis method of powder bed fusion additive manufacturing

Thermal Modeling in Metal Additive Manufacturing Using Graph Theory

Temporally continuous thermofluidic-thermomechanical modeling framework for metal additive manufacturing

A highly efficient computational approach for fast scan-resolved simulations of metal additive manufacturing processes on the scale of real parts

Development of computational framework for titanium alloy phase transformation prediction in laser powder-bed fusion additive manufacturing

A Generalized Feed Forward Dynamic Adaptive Mesh Refinement and Derefinement Finite Element Framework for Metal Laser Sintering—Part I: Formulation and Algorithm Development

Additive Manufacturing Process Simulation of Laser Powder Bed Fusion and Benchmarks