Abstract:It is still an urgent task to design metal coatings for the development of corrosion resistance. Herein, Pb-Co-ZrO 2 coating is fabricated on the surface of aluminum plates via one-step pulsed electrodeposition for corrosion resistance. The pulse frequency, current density and duty cycle are 800 Hz, 15 mA cm −2 and 20 %, respectively. In this work, the concentration of ZrO 2 nanoparticles in the bath is the main operating variable. We further explored the deposition mechanism of the nanocomposite coating and demonstrated its application potential in corrosion resistance. As expected, the corrosion resistance and mechanical properties of the coatings increased and then decreased with the increase of the concentration of ZrO 2 nanoparticles in the plating solution. When the concentration of ZrO 2 nanoparticles in the plating solution was 15 g L −1 , the Pb-Co-ZrO 2 nanocomposite coating exhibited excellent corrosion resistance in 3.5 wt% NaCl solution, with an impedance modulus value (5182 Ω cm 2 ) that was eight times higher than that of the pure Pb coating (669 Ω cm 2 ), possessed the highest corrosion potential (- 0.60 V) and the lowest corrosion current density (3.6 μA cm −2 ), while also exhibiting excellent mechanical properties. The mechanism of the improved corrosion performance of the Pb-Co-ZrO 2 composite coatings was further explained using DFT calculations. The results show that the coupling between the interface of Pb-Co solid solution and ZrO 2 nanoparticles effectively improves the overall electron figure of merit of the coatings and triggers an obvious electron localisation, which increases the energy required for the interfacial electrons to escape from the coating interface.

Multistage Assembled Rubik’s Cube-like Structure and Outstanding Anticorrosion Performance Induced by Magnetic Metal Doping

Corrosion Protection of Nd-Fe-B Sintered Magnets by Aluminum Coating

Improved anticorrosion performance of mixed valence Mn-modified ZnO dilute magnetic solid solution with multilevel self-assembled network structure

Outstanding anti-corrosion performance in Nd–Fe–B permanent magnets by constructing a hydrophobic triplex surface coating

Morphology and Anti-Corrosive Performance of Cr(III) Passivated Zn-Fe Alloy Coating on NdFeB Substrate

Anticorrosion Coating with Heterogeneous Assembly of Nanofillers Modulated by a Magnetic Field.

Corrosion Resistance of Nd–Fe–B Sintered Magnets with Intergranular Addition of Cu60Zn40 Powders

Electroless Deposition of Ni-Co-P Deposit on NdFeB Permanent Magnets and Its Corrosion Resistance Property

Corrosion behavior and strengthening mechanism of Ni-Cu alloy coating on Nd-Fe-B magnets

Enhanced protection of manganese-doped zinc molybdate with synergistic corrosion resistance effects

Construction and excellent photoelectric synergistic anticorrosion performance of Z-scheme carbon nitride/tungsten oxide heterojunctions

Relations of Magnetic and Electrochemical Anti-Corrosion Properties of (zr, Ti)-doped NdCeFeB Magnets with Ti Content

Multifunctional liquid-like magnetic nanofluids mediated coating with anticorrosion and self-healing performance

Fabrication of Pb-Co-ZrO 2 nanocomposite coatings and correlation of corrosion mechanisms with electronic work functions

Corrosion Behavior of Al100−xCux (15≤x≤45) Doped Nd–Fe–B Magnets

A design of sintered Nd-Fe-B magnet exhibiting superior corrosion resistance based on the metallurgical behavior of Ni and Cr

Preparation of coatings with high adhesion strength and high corrosion resistance on sintered Nd–Fe–B magnets through electroless plating

Investigation of Morphology Evolution of Cu–ZnO Nanorod Arrays and Enhancement of Ferromagnetism by Codoping with N

Uniform, Anticorrosive, and Antiabrasive Coatings on Metallic Surfaces for Cation-Metal and Cation-π Interactions

ZnO@ZIF-8 core-shell structure nanorods superhydrophobic coating on magnesium alloy with corrosion resistance and self-cleaning

Organic-inorganic composite passivation and corrosion resistance of zinc coated NdFeB magnets